Used Demag Pk 1 for sale (569)

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW -Speed: 450/1440 rpm Bsdpfezmfc Iex Al Ajln -Shaft: Ø 14 mm -Protection rating: IP54 -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Condition: used, functionality: fully functional, lifting height: 12,000 mm, load capacity: 25,000 kg, DEMAG Slewing Unit DH1063 H24 25 tons Bedpeyyvczsfx Al Aoln 4/1 Main slewing motor KBH200 B6 Main gearbox DH1000, ratio i=50 Fine drive FG10 Slewing unit in used, good condition, functionality tested. Like thousands of other spare parts and components, available at the best prices.

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 125KG Manulift one-hand chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Bodpfx Aerft Nlol Aeln Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Bljdpfx Aey Tptmsl Aen Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Bodpsyy Df Rjfx Al Asln Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Bedpoyugctjfx Al Ajln Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane Bljdpfxsxmi R Ao Al Aon -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Bledpfxjyugalo Al Aen Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Blodpfx Asyzblwjl Asn Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Bjdozd Urtepfx Al Ajln Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Blodpsy Urlnofx Al Asn Width: approx. 500 mm Height: approx. 300 mm Depth: approx. 300 mm Weight: approx. 25 kg Condition: good, second-hand

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN Bledpfoz D Tnqox Al Aen INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, mileage: 67,200 km, first registration: 06/2009, fuel type: diesel, tire size: 16.00 R 25, axle configuration: 6x6, fuel: diesel, Year of construction: 2009, Equipment: ABS, air conditioning, crane, = Additional Options and Accessories = - 6x6 - PTO Bodpszvcz Tefx Al Ajln = Further Information = Tire size: 16.00 R 25 Front axle: Steered; Tire tread depth left: 55%; Tire tread depth right: 55% Rear axle 1: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Unladen weight: 36,000 kg GVWR: 36,000 kg Lifting capacity: 50,000 kg Crane: Year of manufacture 2009 Damage: None

Condition: used, Electric chain hoist, electric lifting unit, crane DEMAG Type PKVUN1 V1 Serial No. 63409464 Year of manufacture: 1993 Rated load: 250 kg Hook travel: 5 meters Distance from suspension to load hook: 400 mm Main lifting speed: 4 m/min Precision lifting speed: 1 m/min Pendant control cable length: approx. 1.7 meters 2 load strands = 250 kg - Emergency stop Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition Bljdpfx Asyv H Efel Asn

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 Bljdpfx Asyg Eu Sjl Aon extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Blsdpfoz D Uv Nex Al Aen Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5.7 kW (7.75 HP), rotational speed (max.): 1,415 rpm, Demag motor/gearbox KBA125 B-4 / AF18 i = 181 ED = 100% 5.7 kW 1415 rpm Motor condition: Refurbished Price on request Blodpoywkwzofx Al Aon

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Blsdpfx Alswvkggo Aon injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Year of construction: 1977, condition: good (used), machine/vehicle number: TH2001/0171-0173, DEMAG KBK crane canopy crane runway with dimensions approx. 10x7m (7m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK1+2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports etc. Bedjvdnivopfx Al Aoln incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN Bodpfx Ajwvkgmel Asln

Year of construction: 1995, condition: good (used), machine/vehicle number: TH2001/0165-0166, DEMAG KBK crane canopy crane runway with dimensions approx. 9x7m (7m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Bledpfevdncvsx Al Ajn Technical data of the system: Crane runway made of Demag KBK1+2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports etc. incl. 500Kg Demag DK2 chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1980, condition: used, machine/vehicle number: TH20009955, Demag bridge crane, crane canopy, crane track, indoor crane Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred Blodpsv A Snajfx Al Ajn

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Bljdpfx Aewq A Avjl Asn Very good used condition Rails available in yellow or red! Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: excellent (used), For sale: a Mannesmann Demag geared motor with an angular gearbox, fully functional and ready for operation. The unit has been inspected and is in good technical condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: Mannesmann Demag Motor type: UMF71BX-6-7 Gearbox type: S040-B5-21-3 Bedpfozn Aamex Al Ajln Motor power: 0.25 kW Power supply: 3×220/380 V Frequency: 50 Hz Motor speed: 890 rpm Output speed: 64 rpm Gear ratio: i = 14:1 Protection rating: IP54 Insulation class: B

Condition: good (used), Year of construction: 2006, Controll : NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Bljdpezw D E Aefx Al Aen Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm