Used Dialysis Machine for sale (83,804)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150610, brushing unit diameter: 180 mm, overall weight: 3,000 kg, workpiece height (max.): 100 mm, roller diameter: 400 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical connection: 380 V, 20 A Dimensions (L x W x H): 5,600 mm x 2,400 mm x 2,100 mm Weight: approx. 3,000 kg Blsdpfx Asx Ahd Tsd Asr Table size: 1,350 mm x 3,200 mm Maximum workpiece height: < 100 mm Polishing roller diameter: 400 mm Feed speed: frequency-controlled MACHINE DETAILS Serial number: 150.610 Number of units: 7 Brush length, unit 1: 1,500 mm Brush diameter, unit 1: 180 mm Infeed table length: 5,150 mm Outfeed table length: 5,150 mm EQUIPMENT Polishing unit with oscillating polishing roller Quick-change system for polishing rings Workpiece clamping with quick-release system Heavy-duty welded precision worktable SEW electric motors with energy efficiency class EFF1 (IE2) Optional vacuum clamping system available

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS X-axis travel: 1,600 mm Bsdpfex Ap S Ejx Ad Ajlr Y-axis travel: 800 mm Z-axis travel: 710 mm Maximum spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Control unit: Heidenhain iTNC 530 Note: The machine can be inspected under power until week 50.

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q Bljdex Af S Ujpfx Ad Asr MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Blodox A Df Tepfx Ad Aor Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Bjdpfjx A Tzqjx Ad Aolr Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Bjdpox A Uu Eofx Ad Aelr Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Bedox A Hagopfx Ad Ajlr Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 3,000 mm Bsdpfx Aex Agh Rod Aelr Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 6197, Submitting a bid obligates timely collection by 15.01.2026! Auction of a Thalmann THAKO folding machine! EQUIPMENT Bljdpfx Adox Daiko Aor Depth stop Automatic program with stored sheet metal shapes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h Bledsx A Dbbepfx Ad Aor EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Bjdpsxywupsfx Ad Aolr Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Bedpfsx A Efhex Ad Aelr TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Bjdpfx Adoxzfwbs Aolr MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Max. bending thickness: 4 mm Max. jaw opening: 100 mm MACHINE DETAILS Weight: approx. 4,300 kg EQUIPMENT Additional tools (as per images) Wiring diagram Blodpfex A Uf Djx Ad Asr

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH Bljdpfx Adex Aph Hj Aer MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT Bsdpjx A A S Esfx Ad Aelr The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Bledpsxzlqzjfx Ad Ajr Turning

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 Bsdpfxeulpu Ss Ad Aslr 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Ermak Model EKM80/150MTB universal ironworking machine., Serial number 51273-B690FC. Year 2014. PUNCHING 80-Ton punching pressure Max diameter 40mm at 14mm thickness Max thickness 24mm at 24mm diameter. Throat depth 510mm Stroke length 70mm Cycles/min at 15mm stroke 35 pieces Table size 625 x 550mm Working height to die 1200mm FLAT SHEARING Flat Bar (Max. thickness) 300 x 20mm Flat Bar (Max width) 450 x 15mm Bsdpsvmzlcofx Ad Aslr Blade Length 475mm Angle Flange Trim 80mm Working Height 1020mm ANGLE SHEARING At 90 Degree shearing 130 x 130 x 13mm At 45 Degree miter shearing 70 x 70 x 7mm Working height 1225mm BAR SHEARING Round Bar Shearing 45mm Square Bar Shearing 45mm Working height 1355mm NOTCHING Material thickness 12mm Rectangular notching width 52mm Rectangular notching depth 52mm V notcher ( side x side x T) 52 x 52 x 12 Working height 1015mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller Blsdpfox A A E Eox Ad Asr

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Bledpfx Ajx A A Akod Asr Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg Bedpfxjx A Awzo Ad Aolr EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Bljdpfxex A Avqo Ad Asr Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Blodpfx Asx A At Ned Aor Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Bljdpfx Ajx A Ar Eed Aer Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot