Wire eroding machine

Sodick VL600Q

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Gkedpfx Aksy R Dtcehjd

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Gsdjzx Ur Nepfx Akhekd

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, turning length: 2 mm, CNC GE Fanuc Series 31i-MODEL 4 Max. workable diameter from bar: 67 mm Max. workable length: 300 mm MAIN SPINDLE Maximum rotational speed: 4000 rpm Spindle nose: ASA 6" Spindle bore: 77 mm Inner bearing diameter: 110 mm Motor power: 22-26 kW (50%) TAILSTOCK Maximum rotational speed: 5000 rpm Spindle nose: ASA 5" Spindle bore: 55 mm Inner bearing diameter: 90 mm Motor power: 7.5/11 kW TURRET 1 AND 2 Number of positions: 12 Rotation time (1 position): 0.15 sec Powered tools: Number of positions: 12 Gkedpfxjx S Eyae Akhjd Maximum rotational speed: 4000 rpm Motor power for powered tools: 1.1 - 3.7 kW (25%) "Y" axis travel of upper turret: 90 (+50/-40) mm Rapid traverse of "Y" axis of upper turret: 9 m/min "Y" axis travel of lower turret: 90 (+50/-40) mm Rapid traverse of "Y" axis of lower turret: 9 m/min

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Gjdpfxez Ehvfe Akhekd Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Gsdpfxsz D Ug Ie Akhjkd Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, controller manufacturer: Mazatrol SMOOTHEZ, workpiece weight (max.): 1,200 kg, total height: 2,938 mm, total length: 3,816 mm, total width: 2,902 mm, table width: 600 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,000 kg, operating hours of spindle: 250 h, spindle motor power: 18,500 W, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9803 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours  ATC 48 Position Optional Lehmann EA-520 R-Mi4 4e axis integrated Optional Lehman Tailstock  Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe  Optional tooling package ca 30 units Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 X - Travel: 1050mm Y - Travel: 600mm Z - Travel: 600mm Table Length: 1300mm Table Width: 600mm Table load: 1200 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Gsdpfx Aozx Sprjkhskd Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 48 Coolant through spindle / Bar:20 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 3816mm Width: 2902mm Height: 2938mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire EDM machine, manufactured in 2014. Travel: X 600, Y 400, Z 450. Table: 750 x 600 mm. Work tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. Gksdpfx Aszd D Nhskhed C-axis. 6-electrode changer. EROWA rotating spindle, 1,150 RPM, with a set of collets. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Gsdpjzz Ihvefx Akhokd Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Gkjdpsx Htfysfx Akhsd Year of manufacture: 2017. Inspection under power possible.

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Gjdpfozw N E Iox Akhjkd Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750