Used Die-Casting Machine for sale (99,542)

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Fgedpfx Aew R Dgzog Njh

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Fsdowywn Ejpfx Ag Nsgh

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition Fgedpfxewpr Ufe Ag Neh AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: used, Year of construction: 2017, heating capacity 2 x 12 kW Cooling capacity 2 x 35 kW Used heating and cooling unit from Robamat for die casting machines. This two-circuit device is designed for the temperature control of die casting tools with water. Available ex stock. Checked, maintained and repaired at service partner of the manufacturer Circuits: 2 Flow temperature max. 160°C Heating capacity 2x 12kW Cooling capacity 2x 35kW Voltage 3x 400V / 50Hz Production cycle - break Interface RS485 new pump protection filter casing and filter insert Fjdpfx Asv U Dl Iog Nogh

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling Fgedpfjwc Tn Tox Ag Nsh piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Fsdett Dybepfx Ag Negh

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: C1403, Foundry machine for aluminum, IDRA 280 TONS REFURBISHED BY TECNOPRESSE IN 2017 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE Fgodpfjwpr N Aox Ag Noh

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number Fgedpfx Agewc Tdzo Neh 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. 8000x7500x3500mm weight approx. 36000kg year of construction 2001

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently. Fgedpfxjfbl E So Ag Nsh

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Fgsdofrvzvspfx Ag Neh Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Fedpefbl Enofx Ag Nogh Machine is DISMANTLED

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Fedpfx Aovxlufeg Njgh Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Fjdpov D Dwpsfx Ag Nsgh Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t Fgodpfx Agotuxmyj Noh lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Fgedevvx Hcepfx Ag Neh ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2000, closing pressure 900 kN Fgsdpfx Aevfhrysg Neh clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m Generaloverhauled diecasting machine DAW80 GO with Datalogic Control for the used of zinc alloys Available upon aggreement

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm height of form 300-700 mm column diameter 110 mm casting capacity 158 kN Fedpfx Aovfhrtog Nogh casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2024, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1Cover for drop through area at the subframe 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.4.2Securing of ejector platen 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.1.1Nitrogen pressure control for piston accumulator 3.2.4Multi-Chamber furnace with pump 3.2.5Isolated Cover for Crucible Multi-chamber-furnace 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.2Convenience Package – Casting – 5.2.1Ejector Pressure graphics in DATADIALOG control 5.4.1Data logging Scope 5.4.2Configurable In- and Outputs 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1Hanging operating desk with monitor Fjdpfxjiu Smbj Ag Njgh 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.2Spray rail CR 245 7.12.3Low noise chute

Condition: new, Year of construction: 2024, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Fedpfx Agsr Hwfxe Njgh Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.1.2Spraymotion 411 E with servo drive 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.1Spray rail CR 155 7.12.3 Low noise chute

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm Fgodper Hwf Aofx Ag Noh distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: used, Year of construction: 1998, workpiece weight max. 2000 gr Fjdpfx Agswx R Uis Njgh Used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer During repair we exchanged weight cell and control.

Condition: used, Year of construction: 2000, Used furnace cabinet for die casting machine Frech type DAW 80 - suitable for multi-chamber furnace MELTEC - type 80/180 with individual controls. Fgedpfx Agjhwt Rbj Njh Has been checked for functionality by the manufacturer.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Included support unit and spray- and blowrail (system SR) Fedpfx Aotwfknog Nsgh Connection 24 pin plug electric driving unit with 400mm stroke length

Condition: new, Year of construction: 2018, pan capacity 420 kg Fgodpfxstv Rlzj Ag Nsh Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1.5 kW (2.04 HP), load capacity: 5,000 kg, Overturn capacity:5T Table Height:580mm Table Size:1200*1200mm Motor Power:1.5Kw Machine Dimension: 2130*1200*1780mm Fgjdpfxouhcdqe Ag Njh SXKH adopted European design, the machine is used to make the mold & die reverse at 90 degree. There are some advantages of the machine, such as heavy weight of overturning, the smooth and stable overturning of the inverted goods, reducing the damage of molds when they are being overturned and reducing the damage of movements and the grounds, which makes the overturning process fast and convenient and makes the safe and civilized production.