Used Casting for sale (1,812)

Condition: good (used), Leybold Vacuum Resin Casting System VGH 1000 Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchasing to prevent any uncertainties. For general inquiries or to arrange an inspection appointment, you can reach me at the phone number listed below or above at any time. Subject to prior sale and errors in the description. Gjdpfx Abjx Emy Ij Uokf VAT is shown separately on my invoices. Shipping by freight forwarding.

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Gedpfx Absxpxmxo Ujkf Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: used, Continuous Casting Machine Gkedpfxexixkws Ab Uof

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 Godoxm Uf Sspfx Ab Uokf • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Gsdpfx Aoxn Sp Dob Uekf

Condition: used, Paint casting machine, paint casting machine, paint casting station Gedpfx Abjc R Iyae Uekf -Paint casting machine -Manufacturer: Burkle -Max. Casting width: 1290 mm -Adjustable casting gap: via handwheel with display -hydraulic: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-15, Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm Gjdegu Dwpjpfx Ab Uokf - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg - Separate control cabinet with high frequency device for - high frequency tools

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Gksdpfx Abewywn Ee Ujf

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Gkedpfxsw R Dgzo Ab Ujf

Condition: good (used), Year of construction: 2000, operating hours: 59,358 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine of the brand Arburg and the type 370 Selectra 800-350 The machine is well maintained and fully functional SD card drive retrofitted Video available soon Technical data Year of construction: 2000 Clamping force: 800 kN Control system: Logica Screw diameter: 35 mm Pumping hours: 69544 h Automatic operation: 59358 h On request, for an extra charge, the machine can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Gjdpfxorywlqs Ab Ujkf

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Gkjdpfsu S N Ahjx Ab Uof Zinc melting furnace ZSO 600 / 700 B

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Godpfxju Ivc No Ab Ujkf

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Gedpfx Abevnrz Ds Uokf

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, Gkodpswc Tn Tefx Ab Uof filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Gksdpfxstt Dybs Ab Uof

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Gkjdpfxoh Nycae Ab Ujf

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 Gedpfowpr Ufsx Ab Uskf SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Gkedpfx Aort Tw Dob Uof Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner Gedswtzpyspfx Ab Uekf - CSA approved

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. 8000x7500x3500mm weight approx. 36000kg year of construction 2001 Gedpewc Tdzsfx Ab Uekf

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Gsdox Hp E Aspfx Ab Uekf Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Gkedpfx Abeucfwpe Usf

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently. Gkedpfx Aofbl E Sjb Uef

Condition: new, Year of construction: 2020, closing pressure 600 kN Gkodpfx Abjiu Smbe Ujf clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Gedjfrvzvepfx Ab Uokf Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.