Blumer Atlas 110
Punching machine / die-cutter
For labels, coasters/ beermats etc
Strip length min./max. : 350 / 1130 m
Strip width min./max. : 45 / 180 mm
Precut label size min. : 25 x 45 mm
Precut label size max. : 150x180 mm
Die cut size min. : 20x41 mm
Die cut size max. : 145x175 mm
Stack height min./max. : 45 x 125 mm
Min. trim per side for die cut : 2 mm
Intermediate trim cut : 3 mm / 22 mm
Height of cutting die : 60 - 100 mm
Mechanical Speed : 10 - 15 strokes per minute
Hot stamping and diecutting finishing machine model Goldline 330
Max width of the material - 340 mm
Max hot stamping area - 330x250 mm
Max roll diameter on unwinding - 800 mm.
Max speed - 5000 cycles / h.
Materials to be used: self-adhesive materials, paper, laminate and cardboard (80-200 g m2 for paper and up to 280 gm2 for cardboard).
The machine includes:
- Two sections of the revolving type with variable pitch for longitudinal and cross foil feed.
- Four pressure regulation zones.
/ new - CE conform / max. sheet size: 815 x 605 mm / min. sheet size: 320 x 280 mm / max. cutting size: 805 x 590 mm / max. width gripper margin: 9.5 mm / max. cutting pressure: 200 tons / material thickness: 0.1~2 mm (80~1400 gsm) / board:<4 mm / max. mechanical cutting speed: 8000 sheets/hour (according to SBL) / register tolerance:+0,075 mm / machine dimensions: 6513 x 1873 x 1834 mm (l x w x h) / machine weight: ca. 12.500 kg
Year of manufacture: 1966
Max format: 800x1120 mm
Min. format: 420x600 mm
Punching area: 780x110 mm
Sheet thickness: 100 - 1000 g/m²
Max. Printing force: 240 to
Machine dimensions: length 5160 mm
Total weight with feeder: 13 to
Total weight without feeder: 11 to
Accessories: Closing frame, Electrical front and side mark control
(side mark can be switched to drawing and sliding).
Machine is suitable for solid and corrugated board processing.
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and board
SMAG Galaxie 2005
Max web width : 260 mm
Min web width : 100 mm
Max print width : 250 mm
Max mech. Speed : 1.200 c/h
1 x Reel unwinder with reel lifting device
4 x Screen printing units with UV dryer and register system
1 x Hot foil printing unit
1 x Laminating unit
1 x Diecutting unit
1 x waste/matrix rewinder
1 x Rewinder
Leed edge Feeder
Folding gluing station
Max.size: 3100 x 1600 mm
With Skip Feed: 3100 x 2080 mm
Min.Size: 480 x 650 mm
Max.Speed: 28-170 Sh/min.
Automatic die-cutting and embosing machine TL-780RD
The machine is built on a die-cutting basis with an automatic feeder, mounted on a common frame,
The machine was built on the basis of the legendary Sargolia machine.
Very quick machine preparation, incomparable with flat diecutting machines.
Max sheet format 780x560mm
Min format sheet 200x300mm
Max. Stack height 700mm
Material weight 100-2000g / m2
Max efficiency 2800 sheets / h
Power consumption 15kW + compressed a...
Centerline system for quick job changeover
Bobst-Electronic machine operating system CUBE 3 (Control Unit Bost Electronic) with color touch screen
Main motor with frequency converter control
Side blowers adjustable with Centerline marks
Measurement of the cutting force with strain gauge on platen
Pile tray wit handle allowing manul lateral correction of the pile during production
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill
Model Year 2012
Mileage: approx.1930 hours
Line for printing and packaging production
Flexo printing machine can print thin film and self-adhesive label
Web Width 330 mm
Printing Width 326 mm
Vetaphone corona 3kW single side
9 x flexo print stations
9 x GEW UV dryers
9 x cooled chill rollers
3 x hot air dryers
1 x inkjet UV MPrint station with table
1 x hot stamping station
1 x cold foil/lamination
1 x slitting station
1 x rewind unit
Video web inspection
KOR & Iwasaki- Flatbed Diecutting Line - 2008
Web width: 10 in [250 mm]
Maximal Speed : 100 fpm [30 m / min]
Foot print: 172in [6.8m] L x 48in [1.8 m] W
U300 In-line booklet unwinder 270 mm web (sn 3108)
ø3" (ø76mm) unwind airshaft c/w pnuematic brake
ø24" (ø600mm) unwind roll capacity
Web guiding disks, aluminum
Splicing table c/w automatic web clamps
Draw roll c/w 3 nip wheels
Loop box c/w 3 ultrasonic sensor
Control panel c/w common E-stop, JOG, RUN, STOP
2 HP DC drive, main
YOUNG SHIN - Diecutting machine
Technical data: Max. Sheet format mm 1500 x 2100
Min. sheet format mm 850 x 1100
* If necessary, with manual system:
Min. sheet format mm 500 x 1100
Max. Format cut to cut mm 1490 x 2100
Min. gripper edge mm 10th
Pressure t 500
Solid cardboard mm 0.9 to 1.5
Corrugated cardboard up to mm 11
Clear frame width mm 1531 x 2160
Max. Sheets / hour No. 3000(depending on operator)
Power requirement kW 32
Compressed air l / h 6
Factory dedicated foiler/diecutter/embosser.
Full size chase for foiling
3 spare chases for diecut or embossing formes
Modified to take foil roll under chase.
Only ever run one foil at a time
Registers well on and off lays
Drive belt poor as engineer set up motor too far over however it runs fine as it is.
Has later model thermostat/heat control unit
Please email for any other information or photos.
Codimag VIVA 340 Aniflo
InSetting sensor Stroke detection
Infrared lamp For initial heating of the web
5 x inking unit Yellow, magenta, Cyan, black, Spot color
Hot foil unit.
inking unit for diverse colours
Screen printing unit
Web edge control
diecutting T343297 unit
ELSCAN OMS4 Web Monitoring // Register Control
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.