Used Direct Press for sale (15,771)

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg Lrodpfx Asx Sx Spjhzsg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Ljdpfex Sxuksx Ahzorg Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, machine/vehicle number: 12638, electrically heated, with footboard, gold anodized plates, dimensions 2950 x 1600 x 2250 mm, new heating plates (2023), 21.1 kW, operating pressure 355 bar, 4 x 90 mm cylinders, pressing pressure 2.7 kg/m², pressing force 900 kN, press room height 400 mm, in very good condition Lrsdpfsybbm Tsx Ahzog Price ex location Transport possible at extra cost!

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Ledox Sw Sujpfx Ahzerg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Lrodpfsulwzmex Ahzeg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm total power requirement . kW Lsdpfx Ahjw Syfcezerg weight of the machine ca. 4 t

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm Lsdpew Syd Eefx Ahzorg weight of the machine ca. 4 t

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Ledpoqc S Naofx Ahzorg

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Lrjdjxpxhvspfx Ahzsg Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Lrodpfxok S Htxs Ahzeg Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Lrjdpoya Iaqjfx Ahzjg Weight: 17,000 kg Good condition

Condition: new, Year of construction: 2025, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge Lsdpfowfnqzex Ahzerg - Emergency stop - 400 V

Condition: new, Year of construction: 2025, - Capacity 160 tons Lredpfox Azghex Ahzog - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop - 400V

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale Press Paal Konti 200 D, year of manufacture 2000, optional with matching conveyor belt Paal KEM-1400 Technical Specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Lodjx Tflfjpfx Ahzjrg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Full documentation available. Please note: All technical data are based on information from the manufacturer. We assume no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lrsdsx R S Nrspfx Ahzeg Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1983, functionality: fully functional, Pneumatic frame press with 4 vertical cylinders and 2 horizontal cylinders. Cylinder stroke: 110 mm. Vertical pressing force: 1100 kPa at 15 bar, horizontal: 700 kPa at 15 bar. Pressing dimensions: 2700 x 1850 mm. External dimensions: 3370 x 2330 x 730 mm. In good condition. Price ex location. Transport can be arranged at additional cost! Lrsdeyaywujpfx Ahzeg

Condition: used, Year of construction: 1997, functionality: fully functional, Pressing force 3,200 kN Throat depth 450 mm Distance table – ram 600 mm Table size 1,650 mm x 900 mm Ram size 1,400 mm x 800 mm Adjustable stroke 20 mm – 160 mm Max. ram adjustment 100 mm Stroke rate 20 – 60 strokes/min. Drive power 37 kW Machine weight approx. 30,000 kg Ledpfx Ahoyc N Emszorg With roller feed + decoiler Further data and images available on request

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control Lrjdsyath Tjpfx Ahzeg - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz Lsdpfxjhlnzko Ahzjrg - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: good (used), Year of construction: 2000, Punching press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 t Turret with 46 tool stations, including 4 D-size index stations Lredpsul S Eaefx Ahzjg 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Model: PBB-630/6200 Lrsdpfx Asrivu Sshzog Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Pressing force: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA 21126ä

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Width: 585 mm. height max. 480 mm. Stroke: max. 355 mm. Lrodpfx Ahjyc Ebdjzeg Weight: 7200 kg.

Condition: excellent (used), Year of construction: 1996, Toggle press Schling Press force 60 kN (6000 kg) Stroke adjustable from 0-25 mm Very clean and in excellent condition Also available: Pneumatic press Benzing (part of Mäder Pressen) Ljdpfx Asyc Eatohzorg Stroke adjustable from 0-60 mm Press force 4.50 kN (450 kg) Clean, well-maintained condition

Condition: used, Year of construction: 1963, total height: 2,880 mm, total width: 1,500 mm, total length: 2,300 mm, Empty weight: 8.000 kg Price: On request Lrjdpewmfrrsfx Ahzeg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Motor power: 7.5kW - Table width: 650mm - Table length: 950mm - Ram width: 340mm - Ram length: 550mm - Min. stroke: 25mm - Model: Eccentric - Max. stroke: 118mm - Height adjustment: 75mm - Power: 160.0ton - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, total height: 2,750 mm, total width: 1,700 mm, total length: 1,600 mm, Empty weight: 4.000 kg Ljdpfxjx Dkfps Ahzorg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Motor power: 5.5kW - Table width: 560mm - Table length: 800mm - Ram width: 300mm - Ram length: 450mm - Min. stroke: 8mm - Model: Eccentric - Max. stroke: 100mm - Number of columns: 1 - Power: 63.0ton - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum