Used Band Press for sale (16,247)

Condition: used, Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement. Iodpsz I Dctofx Am Dsbc

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Ibodpfoz En Axex Am Djc Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Iodez S Utljpfx Am Djbc Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: used, Year of construction: 2021, Overview This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  Iodpfx Amozh Il Is Djbc - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Ijdpfx Amez Rn Sfo Dobc Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Ibsdpfx Aszpffhsm Djc Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Contact for more details or to arrange a viewing! Ibsdpfxov Sq Hyj Am Djc More photos and full specifications: / For sale: Band-All BA32-102 Banding Tool

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm Ijdsz Sqf Rjpfx Am Debc • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm Ibsdpfjz Sqiijx Am Djc • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: used, Year of construction: 2008, 2008 Axe & Status Durma E40300 CNC Hydraulic Press Brake With Durma DU6000 Control & Assorted Press Brake Tooling Capacity 4,050 Width x 300 Tonne Bending Force. Stroke 245mm. Distance Between Columns 3,550mm. Maximum Top Tool Weight 75kg. Maximum Bottom Tool Weight 87kg. S/No. 7553083315 (2008). Iedsz Rw Rwspfx Am Dobc With Tooling Rack With Contents Of Press Brake Tooling, Trolley With Press Brake Tooling, Sick Safety Light Guards, Foot Switch & 2 Front Arm Supports. Overall Dimensions L5,600 x W2,500 x H3,100mm. Weight 17,500kg.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm Ibodpezxcldefx Am Doc MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: excellent (used), Year of construction: 2021, 2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller Ijdpfxjz H U Uko Am Djbc Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). Overall Dimensions L4,350 x W2,040 x H2,515mm. Weight 5,900mm.

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. Ibedpfjz Stfyox Am Djc • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 • Slide adjustment motor: 2.2 kW x 4 • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 4000 Kn

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. Isdpexuhw Dofx Am Debc ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Ibodpfoyh Hc Rex Am Doc

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Ibodpfx Amey Hl Hpe Dec Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Isdpfx Aezy U Uysm Djbc Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Isdpfjdzqmzox Am Djbc Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Ibjdpfx Amezb Aivo Doc Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 Ibedpfoyuv Tex Am Djc overall dimensions w x h x d in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL on request!!!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Isdpfoz Irbqsx Am Dobc Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Ibedpfx Aozrpt Usm Djc dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Year of construction: 1998, condition: used, 1998 Jesse V810-500 Vertical Hydraulic Press, 500 US Tons Capacity with Siemens Simatic HMI CNC Control (Electrics upgraded by Siemens in 2020) 453 Tonnes Capacity. Stroke Approx 2,750mm. Daylight Approx 3,500mm. Platen Dimensions Approx 3,000mm x 2,300mm, (Upper Platen 10,000kg, Bottom Platen 11,570kg). 3 Hydraulic Cylinders - (2) Outer Cylinders & (1) Inner Cylinder. Floating Bed. Brake Systems Side & Top. Stand Alone Electrical Cabinet. Charge Loader, Dimensions Approx 1,500mm x 4,000mm Long. Proximity Switches. Note: All Electrics Were Completely Stripped Out & Upgraded to Siemens by Oilgear UK in 2020. Ibedpfjz E R Svjx Am Djc Walkway Platform & Access Ladders (Installed 2020). Cutting Bench with Foot Control, 415 Volt, Width of Cut Approx 1,700mm. Bramley Engineering LEN105 Pneumatic Height Adjusting 4-Suction Handling Unit. Dimensions of Machine Approx 3,910mm x 2,500mm x 8,670mm High. Weight Approx 40 Tonnes. Power 37.3kW, 415 Volt, 3 Phase. Maximum Pressure 248 Bar (3,600 PSI), Air 5.5 Bar (80 PSI). Note: Structure of Machine checked every 12 months - All Manuals, Paperwork/Invoices available to view. Note: Suitable Machine Dismantling & Electrical Disconnection Company Details Available. Pit Depth of approx 965mm required to hold the Lower Bolster. The Bolster is Equipped with (4) Mounting Pads.

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Isdjztxnqspfx Am Dsbc Colour: Blue Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Iodpfx Aez Rk N Hom Dsbc