Used Directional Drilling for sale (8,099)

Condition: new, Year of construction: 2024, functionality: fully functional, Thrust press system Push and pull force: 24/30 t Hydraulic station 50 m boom Expanders: 80/132/160/200 mm Without locating device Price: €25,000.00 net Hedpfx Aouy N H Esacsw Dry drilling: no bentonite used, no bentonite disposal

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0021S.367.01, overall weight: 850 kg, For sale horizontal drilling machine Schmidt Kranz & Co. GmbH / PERFORATOR PBA 21 S. Used for one job, over 10 years unused. Without drive unit, a functional non-original drive unit can be purchased. Hsdpfewmck Eox Aacjw

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, spindle speed (max.): 1,200 rpm, column diameter: 360 mm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Hodpfxjxn Nbde Aacjw Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Hsdpfx Ajxpvbteacjw Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Hedpfx Aaexm S Idecew Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Hedpfsxphw Tox Aacsw Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Documentation available: No - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) Hedpfxjw N Nq Aj Aacew - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm. Hjdpfx Aaoig T Amocew

Condition: used, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 125 mm spindle taper MT 3 total power requirement 1,8 kW weight of the machine ca. 250 kg dimensions of the machine ca. 1500x1000x1900 mm Features: -Stepless drive Hodpfx Ajxtfzkjacew -Drilling depth stop -Extra-long drill spindle

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours Hsdpsxr Tx Ujfx Aacew 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified timeframe between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Tool holder diameter: 30 mm Number of magazine tool slots: 32 Max. tool length: 260 mm Max. tool diameter without empty adjacent slots: 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal reach: 370 mm EQUIPMENT Documentation/manual Infinitely variable spindle speed FEHLMANN dividing unit (4th axis) Hodpfx Aasxm S R Eocow 126 SK 30 tool holders Supplementary documentation

Condition: used, functionality: fully functional, power: 257.42 kW (349.99 HP), overall weight: 22,500 kg, Year of construction: 2009, machine/vehicle number: 08-12-987, Conrad Boxer 300 Combi – Flushing and Suction Drilling Rig Specifications Brand/Type: Conrad Boxer 300 Combi (Combi 300HD) Serial No.: 08-12-987 Year: 2009 Weight: 22,500 kg Power: 280 kW Engine: Volvo, installed in 2024 TYPE TD 121 G - 350 PK Drill pipes: approx. 42 pcs, length 5 m, Ø 90/80 mm Hodpoxrd Rhsfx Aacew Flushing and suction drilling system

Condition: used, Year of construction: 1986, - Year: 1986 - Documentation available: No - Serial number: 2181 - Motor power: 4.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm Hjdpfownh Rtex Aacjw - Digital readout: No - Tool holder: 45 - Table width: 750mm - Table length: 1020mm - Drilling capacity: 2mm - Travel X: 1600mm - Spindle diameter: 75mm - Travel Z: 900mm - Max. reach: 1600mm - Number of axes: 2 - Spindle speed min.: 28rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1994, spindle drilling machine 1994 (engine new 2015) machine no.: PB04.08.94.261 4 drill heads, can be upgraded to 6 drill diameter: 3mm to 14mm hole spacing: 31.7mm to 293mm hole spacing using the sliding table: Hodpfevccnksx Aacew 1mm to 420mm located: Germany Insertion depth behind the drills: 25 mm sliding table width: 450 mm Sliding table size in front of the drills 300 mm maximum stacking height: 50 mm power requirements: 230/400 volts 3 phases, 50 Hz, 1.87 kWh. space requirement: 770mm (W) x 760mm (D) x 1350mm (H) weight: 275 kg net located: Germany available: immediately

Condition: good (used), Year of construction: 1995, Used radial drilling machine from MAS Hjdsxqfx Dspfx Aacjw Capacity ø 63mm Equipped with drilling cube

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Hodoxr Txnopfx Aacew Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Hodexm S Hyspfx Aacew The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: used, Price: On request - Documentation available: No - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes - Table width: 1500mm Hsdpjwfpbbofx Aacsw - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Technische Daten: Bohranlage 345-31 WHT-Nr. 147-0338 SNr. 103 563 Lineareinheit M4: Fanuc, Typ: Beta is 4/4000 HV A06B-0064-B203 Hedpfx Ajird U Roacjw Motor: in Steckerausführung mit Resolver Resolverleitung und Motorleitung: PM505CBL2040B 10 319V 50Hz 2,3A 3,5Nm , 3000 U/min Bohrband M3: Astro, Typ: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindelantrieb M1: Bonfiglioli, Typ: BN 132 S 6 Nr. 802002 Cod: 8D62030016-519951 230V / 460V 13,5A / 7,8A 50H7 940 min' 3kW cosQ 0,76 IP 55 IsKI.F Hubantrieb M2: Fanuc, Typ: Beta 22/2000 HV is A06B-0086-B503 Motor: in Steckerausführung mit Resolver und Bremse Resolverleitung und Motorleitung mit Bremse: PM505CBL2020B 5 448V 50Hz 3,4A 22Nm, 2000 U/min Einlageband M10 : SEW / Maschienenbau Kitz, Typ: WF 10DT56LA/TF Nr: 01.1230640901.0001.08 230V / 400V 50Hz 0,80/0,46A 0,12kW 1600 U/min cos 0,68 Auslageband M11: SEW / Maschienenbau Kitz, Typ : WF 10DT56LA/TF Nr.: 01.1230640901.0001.08 230V / 400V 50Hz 0,80/0,46A 0,12kW 1600 U/min cos 0,68 Available: immediately Located: Germany

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,200 mm, Empty weight: 2.500 kg - Documentation available: No - Control: Conventional - Motor power: 6.0kW - Drilling depth: 150mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Table width: 600mm - Table length: 1300mm - Drilling capacity: 32mm - Travel Y: 1000mm - Spindle diameter: 40mm - Travel Z: 600mm - Max. reach: 1000mm - Spindle speed min.: 30rpm - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfx Aownilxjacew Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 2,300 mm, total width: 1,800 mm, Empty weight: 1.350 kg - Documentation available: No - CE marking present: Yes - Motor power: 2.0kW - Drilling depth: 150mm Hsdpfx Aaewnibgecow - Spindle speed max.: 3525rpm - Digital readout: Yes - Tool holder: SK40 - Table width: 260mm - Table length: 1245mm - Travel X: 745mm - Travel Y: 406mm - Spindle diameter: 100mm - Travel Z: 305mm - Type digital: ACURITE III - Spindle speed min.: 60rpm - Transport dimensions: 1800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 1350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - Serial number: 132832 - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Hsdpowywwyjfx Aacew Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,700 mm, total width: 1,000 mm, total length: 2,400 mm, Empty weight: 2.500 kg - Documentation available: No - Motor power: 7.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 750mm - Table length: 1400mm - Drilling capacity: 50mm - Travel X: 950mm - Travel Y: 900mm - Spindle diameter: 70mm - Max. reach: 950mm - Spindle speed min.: 28rpm - Transport dimensions: 2400mm x 1000mm x 2700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Hsdpfjwnnbljx Aacew Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, With positioning table Heidenhain controller Hsdpfxewh Smle Aacsw - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: 856 - Motor power: 3.0kW - Spindle speed max.: 3000rpm - Model: omboormachine - Digital readout: Yes - Tool holder: SK30 - Table width: 310mm - Table length: 980mm - Drilling capacity: 32mm - Travel X: 450mm - Travel Y: 900mm - Spindle diameter: 30mm - Travel Z: 300mm - Max. reach: 322mm - Type digital: Ingebouwd - Number of axes: 3 - Spindle speed min.: 1rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Empty weight: 4.200 kg Hodjwnifrepfx Aacew - Documentation available: Yes - Motor power: 2.0kW - Drilling depth: 300mm - Spindle speed max.: 2800rpm - Digital readout: Yes - Tool holder: MK4 - Table width: 700mm - Table length: 1200mm - Travel X: 1200mm - Travel Y: 800mm - Travel Z: 715mm - Max. reach: 1300mm - Type digital: Phillips - Spindle speed min.: 45rpm - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum