Used Dmg Ecomill 70 for sale (402)

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Gsdpfxex Ivkze Abujbh

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Gbodpoxf Ii Uofx Abuoh

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible. Gbsdpfx Ajxruizsbush

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Gsdoydd Acspfx Abuebh

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Gbodpfxex H S I Ts Abueh

Condition: ready for operation (used), A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible. Gsdsxg Ritspfx Abujbh

Condition: ready for operation (used), Year of construction: 2014, A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable on the doors is defective. Documentation available. On-site inspection is possible. Gbjdpswpk Anofx Abush

Year of construction: 2007, condition: ready for operation (used), A DMG Mori CNC 5-axis milling machine is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 18000rpm, tool holder: SK40, torque: 125Nm, tool positions: 60. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2200mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 59901h, spindle hours: 44715h. Documentation available. An on-site inspection is possible. Gbedpfx Ajxddbdebueh

Year of construction: 2004, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62659h, spindle hours: 38299h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Gbedpfx Asv Exrdsbujh

Condition: ready for operation (used), Year of construction: 2000, Travel X/Y/Z: 1150mm/710mm/710mm, table dimensions X/Y: 1500mm/800mm, rotary table diameter: 800mm, max. table load: 900kg/450kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 32, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: 5000mm/4000mm/3000mm, weight: approx. 10000kg. Documentation available. An on-site inspection is possible. Expected to be available in February 2026. Godexv A Hvopfx Abujbh

Condition: excellent (used), Year of construction: 2000, Heidenhain MillPlus control system Gbsdper Hrwxjfx Abueh Travel X/Y/Z: 630/560/560 mm Spindle speed 12,000 min-1 Magazine for 20 tools SK 40

Condition: used, Year of construction: 2006, Lathe DMG Gildemeister CTX 210 Gbedpfx Aeyhlzujbueh Year of manufacture: 2006

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,252 h, spindle speed (max.): 4,000 rpm, spindle motor power: 17,500 W, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 2, This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; Ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle-time and part-count display • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility to mount 6 BT toolholders on turret periphery • Measuring systems: Direct measuring systems on X and Z with air-purge protection • Spindle & workholding: Main spindle 17.5 kW / 370 Nm (40% ED), up to 4000 rpm; bar machining through spindle; max. bar diameter 65 mm; chuck with through-hole clamping mechanism • Tailstock: Heavy-duty hydraulic tailstock, programmable with two selectable feed speeds • Axes/guides: Linear guides on all axes, width 45 mm; rigid machine bed; high positioning accuracy Gbedpfx Abox E Eaasuoh • Footprint/chips: Compact footprint; chip discharge from the side • Lighting: Integrated LED work area lighting • Coolant: High-pressure coolant pump 12 bar; manual coolant flushing gun 5 bar Additional equipment • Chip conveyor (included)

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Godpfsx Tu Suox Abuobh Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Tool drive power: 1.1 kW Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Gbjdpfx Ajygl N Nebush Main spindle and counter spindle with new bearings!

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel Gbodephlviopfx Abueh 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 Gsdpfsxbtqiex Abuebh driven tools turning speeds 4.000 U/min travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: used, Year of construction: 2002, Technical Data: Travel X-axis: 1250 mm Travel Y-axis (cross): 880 mm Gedpfxjx Iry Sj Abujbh Travel Z-axis (vertical): 800 mm Tool holder: SK50 Drive power: 44 kW Tool magazine: 60 stations NC rotary table, table size: 1250 x 1000 mm Max. rotation speed of table: 8.1 rpm Universal milling head: B-axis Spindle speed range: up to 10,000 rpm Control unit: iTNC 530 Total connected load: 81 kVA Max. tool diameter for 30/60 tool stations: 100 / 110 mm Max. tool length from spindle nose: without tool breakage monitoring: 450 mm with tool breakage monitoring: 390 mm Features: - Heidenhain iTNC 530 control - 5-axis - 60 tool stations - NC rotary table - Coolant system

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     Gbsdpfx Absx Sqptsujh BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m Godpfsx Urn Aox Abuobh

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment Gbsdpfx Ajx D Di Uebush • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis DMG MORI DMU 75 monoblock was manufactured in 2017. It features a Heidenhain TNC 640 3D control, a production package with a 40 bar/23 l/min, 600 l tank, and a Blum laser for in-workspace tool measurement. Ideal for complex machining tasks, this vertical machining center represents a significant asset for precision engineering. Contact us for more information about this machine. • Coolant/through‑spindle: Production package 40 bar, 23 l/min, 600 l tank • Washdown/coolant gun: pump 2 bar, 40 l/min • Air blow cooling device • Workpiece probing: Heidenhain infrared probe (SK40) Gsdpfx Abjx D Dkfoujbh • Tool measurement: Blum laser in working area • 3D quickSET • Electronic handwheel • Application Tuning Cycle (ATC) • Languages: Machine plates Hungarian; screen display German • Documentation: Manuals 1 & 2 (German); electrical schematic (German) • 3D data model • DMG MORI Netservice (base package/client) • Packaging/logistics: Base machine and production package packed on floor with film; pickup ex‑works

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm Gbjdpoyca Npsfx Abujh • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. • Operating hours: 17,641 h Gbsdpfx Aoyca I Sobuoh • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Gbedjycpxgopfx Abush Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement