Used Dmg Mori Ecomill 50 for sale (207)

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Fsdpfx Aaewl N Tqeyspl Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Fpedpfoyxn I Hsx Aayjl

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm Fedpfezx A Iljx Aayopl Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163 Control System Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 2,700 mm Y: 2,700 mm Z: 1,600 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 2,200 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Tool holder: SK50 according to DIN 69871 Tool Changer 63-slot wheel magazine Fsdpfszqxkmsx Aayepl Double gripper Equipment IKZ 40 bar Chip conveyor Electronic handwheel Rotating viewing window Minimum quantity lubrication (MQL) Coolant through spindle Coolant tank 980 l Mold making package Active chatter suppression (ACC) Adaptive feed control (AFC) Oil/emulsion mist separator Smartkey package Additional safety viewing windows (Visiport) Operating mode 4 (process observation) Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Weight approx.: 85,000 kg Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2024, operating hours: 882 h, functionality: fully functional, machine/vehicle number: C-A3435F, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, input frequency: 50 Hz, space requirement height: 2,250 mm, space requirement length: 2,750 mm, space requirement width: 2,750 mm, table length: 1,400 mm, table width: 600 mm, 3-axis milling technology with maximum rigidity + InLine spindle with 12,000 rpm + Tool magazine for 24 SK40 tools + Chip tray & chip conveyor + 3D data model + IoT connector and NETservice + Signal lamp, 4 colors Red: General fault Yellow: Machine intervention required Green: Machine in automatic mode Blue: Machine in setup mode Fpsdpfxsy U D Tds Aayel

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,806 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, workpiece height (max.): 630 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis DMG MORI CMX 600 V was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 560 mm and can accommodate a maximum workpiece weight of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 600 V vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 560 mm • Max workpiece length: 900 mm • Max workpiece width: 560 mm Fpsdpfx Aezbifwoayol • Max workpiece weight: 600 kg • Connected load: 32 kVA • Supply voltage: 400 V, 50 Hz Additional equipment • Lehmann NC rotary table (4th axis) Technical Specification Taper Size HSK 40

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: chip conveyor, documentation/manual, DMG MORI Machining Center 5-Axis Simultaneous Type: DMU 95 MonoBlock Year: 2016 Fodpozxpt Uofx Aayepl

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow Fpodozkrqyopfx Aayjl • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123 Control Fjdezv A Akspfx Aayopl Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 1,850 mm Y: 2,100 mm Z: 1,250 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-fold chain magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Coolant through spindle Coolant tank 980 l Rotating viewing window 3D quickSET Machine Protection Control (MPC) Adaptive Feed Control (AFC) ATC (Application Tuning Cycle) DMG MORI NetService DMG MORI SMARTkey Documentation and electrical schematic (German) Travel X-axis: 1850 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Fedpfx Aasxgk Nmjyepl Spindle 12,000rpm Taper : BT40 ATC 30

Condition: like new (used), Year of construction: 2023, operating hours: 9,000 h, functionality: fully functional, Lease return Used for one year 9,000 spindle hours CNC control: CELOS with Siemens 840D sl Operate 21.5" ERGOline control panel with multi-touch screen Motor spindle speedMASTER HSK-A63 20–20,000 rpm, 35 / 25 kW, 130 / 86 Nm (40 / 100% duty cycle) Tool changer: Chain magazine with 60 tool pockets and double gripper Machine weight per machine approx. 9,850 kg Technical Data Working Area Travel (X / Y / Z): 600 / 500 / 500 mm NC rotary swivel table, table size: 600 x 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° continuous Table load: up to 400 kg Spindle and Drive Motor spindle speedMASTER HSK-A63 Speed range: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40% duty cycle), 86 Nm (100% duty cycle) Tool Magazine Chain magazine with 60 tool positions Double gripper for automatic tool change Fodpfxjx Dq Ide Aayjpl Tool holder: HSK-A63 Cooling and Chip Removal Internal coolant supply through spindle with paper band filter Pressure range approx. 20–80 bar, frequency-controlled Coolant tank approx. 980 l Bed cleaning and extended work area flushing Double cartridge filter, fine filtration 50 µm / 25 µm Coolant temperature control unit, heating and cooling output approx. 4 kW each Scraper-type chip conveyor Coolant spray gun Oil / emulsion mist separator Rotating safety window in operator door Measuring and Monitoring Systems Infrared workpiece probe Renishaw Laser tool measurement system for automatic length and diameter measurement, retractable below table level, incl. calibration tool Software option 3D quickSET for verification and compensation of 5-axis kinematics Sensor package (2022 machine) with i4.0 sensors incl. spindle growth and coolant flow sensors Automation and Options 4-color signal tower Pneumatic actuation for zero-point clamping system EROWA UPC with rotary coupling and two active pneumatic circuits DMG MORI PROFIBUS interface with side loading door for robot connection, dual-channel safety circuits Safety glass in operator door, polycarbonate side windows, automation preparation Electronic handwheel Preparation for DMG MORI NETservice IoTconnector Service Agent and Messenger for remote maintenance and condition monitoring Equipment and Accessories Package DMU 60 eVo basic machines as described Chip conveyors and internal coolant systems on all machines Complete CELOS / Siemens 840D sl controls with ERGOline operating panels Workpiece and tool probes (Renishaw / BLUM) on all machines Preparation for zero-point clamping system EROWA UPC on all machines Documentation available in German and English Condition and Inspection All three machines are in very good condition, from a modern manufacturing environment with a high maintenance standard To the best of our knowledge, there are no significant defects or functional limitations A powered, in-operation inspection is possible by appointment

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Fsdpfx Ajzv Eglsayspl Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, Fpedpfx Aaownpzaeyjl B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: excellent (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, table width: 560 mm, table length: 900 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 5,500 kg, coolant supply: 10 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Vertical machining center DMG MORI CMX 600 V Year of manufacture: 2019 Control system: Sinumerik 840D - SLIMline Multitouch control Operating hours: 11,000 h Technical data: Spindle speed: 20 - 12,000 rpm Drive power: 13 kW Torque: Fpjdpfx Aezmp A Esaysl Internal coolant supply: 10 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 600 mm Y-axis: 560 mm Z-axis: 510 mm Accessories: - 3D probe - Coolant tank

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, collet bore: 38 mm, turning diameter over cross slide: 60 mm, spindle bore: 38 mm, feed length X-axis: 300 mm, feed length Z-axis: 286 mm, spindle speed (max.): 6,000 rpm, overall weight: 1,900 kg, Precision lathe DMG MORI WASINO G 100 / 300 Fpsdpfx Aezwcqwoayol Year of manufacture: 2017 Control system: Fanuc (DMG Compact line) Travel distances: X-axis: 300mm Z-axis: 285mm Main spindle speed: 0 - 6,000 rpm Bar diameter: 38mm Accessories: - Electronic handwheel - Coolant system - Fire extinguisher - 3x driven tool holders Machine has only been operated under oil lubrication. Accuracy as when delivered!

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe - Chuck diameter: 250 mm Fjdpfx Aaszxzc Ioyopl - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Fjdjzc D Hfjpfx Aayepl

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. Fpsdpfx Aaszx Ek Aeyol The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm Fodeyt Hwzopfx Aayspl • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: CMX 70 U Year of manufacture: 2022 Control system: Celos with Siemens 840D sl Operate Technical data: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm B-axis: -10 to +95° C-axis: 360° Main spindle: Tool interface: SK 40 Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (40/100%): 20 / 14.5 kW Torque - main spindle (40/100%): 121 / 84 Nm Work table: Table size: D 800 x 620 mm Fpedpfezcy I Sox Aaysl Tool changer: Number of tool positions: 30 Max. tool diameter: 80 / 130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 120 kg Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 5,300 h Spindle hours: approx. 3,010 h Technical features & accessories: - Direct linear measuring system in x, y, and z, incl. air purging - Compressed air switching via M function - Chip disposal package, includes: - Chip conveyor, tank 300 l - Spray gun - Signal light, 4-color - Tropical package, includes: - Active control cabinet cooling - Additional cooler on the control panel - Hydraulic oil temperature sensor - Cooling unit 3.3 kW for the main drive - Preparation for oil mist separator - Measuring probe kit, manufacturer Heidenhain, includes: - TS460 workpiece measuring probe - Measuring cycles - Tool length/diameter kit, manufacturer Heidenhain, includes: - TT160 for tool measurement - Measuring cycles, incl. tool breakage monitoring - Automation package, includes: - Loading and unloading via automatic magazine door - Automatic closing of the tool magazine - Cabin roof - Electronic handwheel - ATC (Application Tuning Cycle) - Preparation for 3D quickSET Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Swiss-type cnc lathe DMG MORI SPRINT 20/8 Fjdpfx Aaszxildsyjpl

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Fsdpfeza Apasx Aayopl 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Control system Siemens Sinumerik ONE, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Tool changer with 24 positions, Linear axes X/Y/Z 24 m/min Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor Renishaw probing system kit Coolant spray gun Enclosure roof Internal high-pressure cooling 20 bar, Bed flushing via M-function Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator, Ø 150 mm, 4th axis package, -Rotary table Lehmann, type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation Software preparation for Rotary table machining lRACYL software for surface machining Tilting cycle (Cycle 800) Holding torque spindle clamping: 800 Nm Max. speed: 65 rpm, Center height 150 mm, Rotary table positioned along the X-axis on the right side of the work table, Manual chuck (three-jaw), diameter 160 mm, Tailstock, manual, for NC rotary table, stroke: 40 mm, center height 150 mm, Fjdpfx Ajza Alueayjpl Tropical package, Active cooling unit for control cabinet, Compressed air, external and internal (through spindle center), can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 1800 spindle hours.

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, Fedowb A Hcopfx Aayopl power 5.5Kw, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 17,000 W, total height: 1,950 mm, total width: 3,260 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, product length (max.): 2,440 mm, number of axes: 3, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. • V3 Version (No counter spindle, no y axis) • no bar loader • features a main spindle motor power of 25.5 kW (at 40% DC) or 17 kW (at 100% DC) Fjdpfxeyu Sc Es Aayjpl Technical Specification Counter Spindle No Driven Tools Yes