Used Dmg Nef 400 for sale (395)

Condition: excellent (used), Year of construction: 2002, spindle bore: 90 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 36,000 W, total height: 2,600 mm, total length: 4,200 mm, total width: 2,300 mm, overall weight: 8,000 kg, CNC Lathe with c-axis DMG MORI - CTX 520 Linear MACH-ID 9890 Make: DMG MORI Type: CTX 520 Linear Control: SIEMENS 840D YOP: 2002 Max. turning Ø: 440mm X-Axis: 315mm Z-Axis: 1350mm Spindle bore: 90mm Speedrange: 4000Rpm Spindle power: 36kW ATC / revolver: 12 Dcsde Ahgqcjpfx Apmjp B-Axis Toolsystem:VDi-40 Chip conveyor: Yes Pinole taper: 5Mk Stroke pinole: 120mm Length: 4200mm Width: 2300mm Height: 2600mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical data: Turning length: 500 mm Djde Ahkfnspfx Apmscp Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. • Spindle: Dcedpfxez Hb Tas Apmsp • Max torque: 83 / 57 Nm • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: excellent (used), Year of construction: 2015, operating hours: 10,001 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 3,850 kg, Operating hours: 10,001 h Spindle hours: 3,621 h Control system: SIEMENS Sinumeric 840 D Spindle speed: 12,000 rpm Tool changer with 20 positions Djds Ahy T Nspfx Apmjcp Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Includes tools (see images)

Condition: good (used), Year of construction: 2006, CNC Milling / Turningcenter Machine type: DMG GMX 200 linear Control: Siemens 840D Year: 2006 SPECIFICATIONS Max. swing over bed: 560 mm Turningdiameter: 400 mm Spindle speeds: 0 - 4.000 rpm Spindle power: 45 / 36 kW Dcjdpfx Aoziy D Sopmop Torque: 750 Nm C-Axis CNC-Spindle tilting for cutting and turningopertations Max. revolution: 12.000 rpm Spindle power: 13,2/22 kW Travel X-Axis: 485 mm Y-Axis: 80 +/- mm Z-Axis: 1.070 mm Rapid motion: (X/Y/Z): 40 / 24 / 70 m/min. Angular range: +/- 120° Tailstock: NC Quill: MK 5 Equipment Steady rest: SMW SLU-3.1 Chip conveyor paper band filter Cooling pumps: 8 bar; 20 l/min

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm Dodpfx Apsy Dg Euemscp +/- 5.000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Dcedpo Ahn Hyjfx Apmep Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Dcedpfx Ape Ah Adbemep Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop :

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm Dedpfxjzvhm Ie Apmocp z-travel 375 mm control Siemens 840D sl Linear b-axis -5 till +110 °

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2014 Control : Heidenhain TNC 640 Speed : 18000 rpm Movement X/Y/Z : 800/1050/850 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Power:35 kW Torque:130 Nm Taper:HSK-A63 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:ø800 x 630 mm Tableloading (max.):1.400 kg Djdpfo Ah Admox Apmjcp In general: Toolmagazine:Wheelmagazine (3 wheels), 273 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 649 Toolmeasurement:Laser, BLUM Micro Compact NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Dcjdpfx Aps Ah Adiemop Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: good (used), Year of construction: 2014, Ref. -No.: 10654 Manufacturer: DMG Type: DMU DMC 80 FD duoblock Year of construction: 2014 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: mm Y-Travel: 1050 mm Z-Travel: 850 mm B-Axis: 180 ° C-Axis: 360 ° Machine length: 5100 mm Dodpfx Aj Ahmvxjpmscp Machine width: 2500 mm Machine Height: 3100 mm Tool Taper: HSK - 100 Numbers Of Tools In Magazin: 243 Turning Speeds: 10000 RPM Max. Torque: 2050 Nm Feed Speeds X/Y/Z Axis: mm / min Rapid Travel X/Y/Z: 60 mm / min acceleration: 7 / 7 / 7 m/s² Total Power Requirement: 36 kW Weight Of The Machine Ca.: 15300 t Spindle speed gear stage 1: min Spindle speed gear stage 2: min Holding torque: 3400 Nm Max. rotation of the table top: rpm Resolution of the measuring system: 0,001 ° Pallet clamping surface: Ø x 630 mm Weight of the pallet: 300 kg Feed force in X and Y axes: 13 Feed force in the Z-axis: 9 furnishing operation: 20 - 2000 m / min Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Dodpfx Ajz Nxcxepmscp Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. Djdpoy Uvnyjfx Apmocp - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit- Chip Conveyor Not Included Technical Specification Through-spindle Coolant No

Condition: used, Year of construction: 2019, operating hours: 17,324 h, functionality: fully functional, machine/vehicle number: 06990000471, spindle speed (max.): 5,000 rpm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, input voltage: 400 V, overall weight: 6,500 kg, input frequency: 50 Hz, controller manufacturer: Siemens, controller model: 840d sl, For sale is a used DMG CTV 250 vertical turning center in good condition and ready for operation. The machine is equipped with driven tools, allowing for the economical complete machining of complex workpieces. Dedpfxezg Dy Eo Apmjcp The scope of supply also includes a parts conveyor belt with 30 shuttles for automated workpiece transport and efficient series production. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, spindle bore: 118 mm, bar passage: 118 mm, Machine with very few operating hours. As good as new. Machine with a large number of accessories. 20 bar pressure on the coolant. Turret from SMV. Djdpj Afzf Esfx Apmjcp

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 004xxxxx Tool holder type: VDI 30 X stroke: 260 mm Z - stroke: 550 mm Bar passage: 65 mm Turning Diameter: 500 mm Turning Length: 520 mm Spindle Speeds: 5.000 RPM Spindle Bore: 76 mm Tool changer: 12 Pcs Operating hours: 38.500 Hours Dcodo Ahw R Eopfx Apmsp Weight Of The Machine Ca.: 4.8 t Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG MORI DMU 95 monoBLOCK was manufactured in 2022. It features a working range of 950 mm x 850 mm x 650 mm, 40 bar IKZ and a motor spindle with a speed of 20,000 rpm. The machine includes a double gripper chain magazine with 60 stations and an NC swivel rotary table with a diameter of 850 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 monoBLOCK vertical machining centre. Contact us for further details. - Motor Spindle: speedMASTER 20,000 rpm- Spindle Drive Power: 35 kW (40% DC / ED) / 25 kW (100% DC / ED)- Tool Interface / Taper: HSK-A 63 according to DIN 69893 (adapted working spindle and magazine)- Tool Changer: Double gripper chain magazine with 60 tool stations- Rotary Table: NC swivel rotary table, C-axis table surface: dia. 850 mm x 750 mm, integrated into rigid table 1,000 mm x 750 mm- Internal High-Pressure Coolant (IKZ): 40 bar / 23 l/min through spindle centre (AD), frequency-controlled- Coolant Tank / Filtration: Bürener Maschinenfabrik 600-litre coolant unit with paper band filter- Chip Disposal: Scraper flight chip conveyor (discharge height: 950 mm, width: 970 mm) - External Coolant Supply: 4 bar / 40 l/min- Washdown & Flushing: Ring coolant nozzle for vertical headstock (16 water / 7 air nozzles), work area door chip wash, manual spray gun- Spindle Air Blast: Air blast through spindle centre selectable via M-function- Mist Collector: Oil and emulsion mist extraction unit with mechanical filter (throughput volume: 1,100 m³/h)- In-Process Probing: Renishaw PP60 optical (OMP 60) infrared touch probe- Tool Measurement: Blum Laser DIGILOG for vertical tool length and diameter measurement in workspace- Workspace Visibility: Rotating viewing window (Rotoclear) in machine door- Spindle hours: 1.031 h, Machine-On: 2.190 h Dcsdpfe Ahpm Ajx Apmjp Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2018, operating hours: 20,876 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 25,500 W, overall weight: 5,400 kg, controller manufacturer: SIEMENS, controller model: DMG MORI SLIMline Multi-Touch, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2018. It features a maximum turning diameter of 400 mm and a turning length of 800 mm, with an impressive spindle speed of 4,000 rpm. The machine includes a 12-position VDI 40 turret and driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. Working capacity and axes: • Axes: X, Z; C-axis on main spindle • No Y-axis; no counter spindle (V3 configuration) • Max turning diameter: 400 mm • Max turning length: 800 mm • Swing over bed: 700 mm Dodpfxjz Im N Ne Apmocp • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Direct measuring systems on X and ZMain spindle: • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW @ 40% duty / 17 kW continuous • Torque: 426 Nm @ 40% duty / 283 Nm continuous • Chuck: Hydraulic 3-jaw BB-D 250/Z220, D 78 mm (as per original offer)Tool turret: • 12-position VDI 40 turret with 6 additional BT stationsDriven tools: • Max speed: 4,000 rpm • Power: 5.44 kW @ 40% duty • Torque: 20 Nm @ 40% dutyTailstock: • Tailstock travel: 800 mm • Centre taper: MT5 • Max thrust: 8 kN • Tailstock foot pedalIncluded options: • Production package • 12-bar coolant pump • Manual washdown gun for working area • Dual coolant filter • Tool probe in the working area • Preparation for oil mist extraction • Easy Tool Monitoring • DMG MORI Messenger V2 • DMG MORI Netservice client • German screen language and documentationHour meter: • Power on: 38,556 h • Spindle: 20,876 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2014, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller model: Sinumerik, table width: 560 mm, table length: 1,200 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, We offer this used DMG MORI DMC 1035V ecoline vertical machining center, manufactured in 2014. Factory number: 1539000738A Year of manufacture: 2014 X/Y/Z 1035 × 560 × 510 mm Table: 1200 × 560 mm Maximum spindle speed: 8000 rpm Dcjdpoz Iyv Asfx Apmop SK40 Sinumerik Spindle overhauled in June 2026 First owner Weight: 4500 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2009, operating hours: 18,493 h, functionality: fully functional, Base machine CTX alpha 500, driven tooling, G-axis, measuring probe in X-axis Control system: Siemens CNC control system SIEMENS 8400 ERGOLine Options Opposing spindle ISM as. C, Y-axis, instead of tailstock Coolant and chip disposal Coolant system 8/20 bar, 600 L, band filter Coolant spray gun Equipment for bar machining Package for bar machining CTX alpha 52 mm Main spindle reducing sleeve Short bar loader magazine, IRCO, ILSRBK 100/12 Clamping device for main spindle 3-jaw chuck, BBD 21066, manufacturer SMW Collet chuck KSZCC 60, manufacturer SMW Clamping device for opposing spindle Collet chuck KSZCC52, manufacturer SMW 3-jaw chuck, BBD 170-52, manufacturer SMW Documentation Documentation, delivery list, technical documentation DMG Powertools DMG Netservice - on board Special designs Dcsdpe Ahi Ngofx Apmop Swiveling scraper for chip conveyor, manufacturer Bürener, SP63/30225 Tool spindle, 90° angular geared double spindle head, 2 pieces, 105465 Drill bar holder, 6 pieces, 085822 Multiple holder, form 2, 1 piece, 114008 4-fold holder for Y-machine, 1 piece, 1530200Y Multiple holder, form D130x20, 4 pieces, 114013 Reducing sleeve, 8 mm, 2 pieces, 100244 Reducing sleeve, 10 mm, 2 pieces, 100245 Reducing sleeve, 12 mm, 2 pieces, 100246 Reducing sleeve, 20 mm, 3 pieces, 100248 Reducing sleeve, 25 mm, 2 pieces, 100249 90° adapter, left, 2 pieces, 0E5390 90° adapter, right, 2 pieces, 085407 Cylindrical shank holder, form E230X25, 1 piece, 113985 Tool holder with cylindrical shank, form E3/E430x25, 4 pieces, 113880 Actuating key for dovetail, nut ER25, 1 piece, 105762 Collet chuck holder d=32, ER25, 2 pieces, 107846

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Dodpfx Aozwvv Tjpmscp Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2013, operating hours: 1,450 h, functionality: fully functional, turning length: 1,250 mm, spindle bore: 80 mm, Equipment: documentation/manual, Machine with very few operating hours, almost like a new machine. Machine with a lot of accessories. 20 bar pressure in the coolant. Dcsde Afzffspfx Apmjp

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Technical Specification Dcodpjzh E Akefx Apmep Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Spindle speed max: 10,000 rpm Djdpfx Asz Hl Ihspmscp Weight: 6950 kg X/Y/Z: 1100×550×510 mm Table: 1400×600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity due to a monolithic bed and fixed table (maximum load 1700 kg) First owner Price: LEASE TRANSFER Transfer fee: 0.00 EUR Lease payment: 1340 EUR/month Total amount of payments to be paid (24-72): 64,320 EUR Lease buyout amount: 4200 EUR. The price stated in the advertisement is the total value of the lease agreement.