Used Doosan 310 for sale (309)

Condition: used, functionality: fully functional, machine/vehicle number: FBA20139000275, Year of construction: 2018, operating hours: 8,825 h, load capacity: 3,500 kg, lifting height: 3,495 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: FBA20139000275 Load center: 500 Fork width: 1300 mm Mast type: Standard Godpexn Ehtofx Afcekd Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,750 h, Year of manufacture: 2010 Drive: Wheel Gkjdpfjw Afrdex Afcod Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Gkodpfx Afjthb Icecsd Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. Gjdpfexn Amtex Afcokd number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 88 h, load capacity: 1,600 kg, High-lift stacker Doosan LEDS 16, year of manufacture 2019, 88 operating hours, triplex mast, lifting height 4390 mm, overall height 1950 mm, load capacity 1600 kg, incl. charger. Gkodpfx Afexr Aguecsd

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG Gkjdpfeullmdox Afcsd * Engine 41 KW 56 HP * Blade support

Condition: excellent (used), Year of construction: 2011, Turning and Milling Center Doosan Puma TT 1800 SY, Year 2012 Control: CNC Fanuc 18i-TB Number of simultaneous axes: 8 (C1, X1, Z1, Y / X2, Z2 / B & C2) Gkjdpfx Afjxtxpbocjd Number of simultaneous axes according to export control: 4 (C1, X1, Z1, Y) Linear axes: 3 (X1, Z1, Y) Rotary axes: 1 (C1) Parallel axes: 4 (X2, Z2, B, C2) Technical Data: - X1 axis: 165 mm, X2 axis: 190 mm - Z1 axis: 700 mm, Z2 axis: 720 mm - Y axis: 100 (± 50) mm, B axis: 770 mm - Bar capacity: 65 mm - 2x Turrets – 12 + 12 tool stations Max. Turning Diameter: 230 mm Max. Working Length: 230 mm Spindle speed: 5,000 rpm Equipment: Standard, transformer, chip conveyor with coolant tank, 1 set of tool holders including driven tools, driven holders 2x axial and 2x radial holders, documentation Bar feeder LNS

Condition: used, color: red, lifting height: 4,650 mm, Year of construction: 2015, operating hours: 8,180 h, Year of manufacture: 2015 Empty weight: 8.500 kg Carrying capacity: 230 kg GVW: 8.730 kg Godpfxjttzuvo Afcokd Digging depth: 4.175 m

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Gkjdpjw Srarefx Afcod Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: 12-position turret for driven tools Gedpfx Aowqpn Esfcokd Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Gkedpfx Afevg Nq Hjcsd Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: used, Torni CNC Doosan Puma TW2600 2016 (low hours) complete with robot Gksdpfow Slx Uox Afcjd it can be inspected in our warehouse in Gussago BS

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Gjdpfoxnpcusx Afcskd

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 4000 mm Measurements depth 5000 mm Measurements height 3800 mm Machine weight 18000 – 20000 kg Main Drive Spindle speed range 6000 Tool taper BT-50 Number of axis 3 Movement X-Axis Movement 2500 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 950 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 850 mm Godpfxexvfiyo Afcokd Z-Axis Rapid Traverse 18 m/min Table Table load 4000 kg This 3-axis DOOSAN MYNX 9500 was manufactured in 2020, featuring a BT-50 spindle taper and a spindle speed of 6,000 rpm. It includes a 40-tool ATC and can handle a table load up to 4,000 kg. The machine dimensions are approximately 5,000 × 4,000 × 3,800 mm. If you are looking to get high quality milling capabilities consider the DOOSAN MYNX 9500 machine we have for tact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, Gkedpfx Aew Npz Iofcsd 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: used, Year of construction: 2016, operating hours: 6,800 h,

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Serial number: N016 Rental currency: EUR Gsdpfexgz Utjx Afcjkd Please contact Jan De Lepeleer for more information

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Godpfxjxmkfhj Afcekd Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST , year 2012 Location 78176 Blumberg Turning diameter 760 mm turning length 1540 mm Control FANUC 31i Chuck diameter 254 mm Bar diameter 76 mm Spindle bore 86 mm Turning diameter over bed 1000 mm x-axis 630 x 220 mm z-axis 1585 x 1515 mm y-axis 230 mm Speed 4,000 rpm Spindle nose A2-8 Milling spindle speed range 10,000 rpm Tool changing device 80-fold Tool turret 12-position Tool holder BMT 65 P, Capto Drive 26/22 kW Total power requirement 100 kVA Machine weight approx. 15.5 t Space requirement approx. 6.1 x 2.7 x 3.0 m with counter spindle, lower tool turret, driven tools and 80-fold tool magazine Hydraulically operated hollow clamping device 12-station tool turret at the bottom with BMT 65 P Chuck blow-out system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the counter spindle Automatic tool measuring arm Electronic tool breakage monitoring Gsdpfsrcf Dysx Afcjkd 2-pressure clamping for the main and counter spindles Automatic shutdown at the end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended coolant system High pressure and paper belt 80-fold tool magazine Due to high office costs (customs regulations) we do not deliver to Turkey, Iran, Russia and Belarus. Request more information

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Gkedpjxlvbrofx Afcjd Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant Gkodpfxew I Tnis Afcod

Condition: used, Year of construction: 2014, operating hours: 9,600 h,

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Gjdpowu Rgqjfx Afcjkd Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: used, Year of construction: 2015, operating hours: 13,120 h,