Used Doosan Dx 255 Lc for sale (287)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. Gjdjyzhbfspfx Agpsit A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 = Further Information = Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg CE marking: yes Overall condition: average Giedpfsyxg Dmex Agpjt Technical condition: good Visual condition: average

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube Gedsv Iq Ezjpfx Agpjit 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Technical Specification Godpfx Aoyxpplsgpoit Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set Giedpfx Aeyxhqzegpet • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Giedpfeywkw Isx Agpjt Weight: 15.5 t.

Condition: good (used), Year of construction: 2014, Gas forklift DOOSAN GX30 (model G30G), No. FGA0Y-1480-00876, year of manufacture 2014, lifting capacity 3,400 kg, lift height 3,000 mm, mast height approx. 250 cm (duplex mast), hydraulic side shift, 2,106.5 operating hours (read from the meter). Giodsy D Dxxopfx Agpot

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Gedpexw Ilmofx Agpeit Renishaw Toolsetter

Condition: used, Year of construction: 2020, operating hours: 634 h, load capacity: 1,600 kg, lifting height: 3,000 mm, fuel type: electric, construction height: 3,000 mm, Equipment: head guard, * Hydraulic fork adjustment * Electric drive * Battery charger ----Vehicle number: 11865 Gsdpfx Ajyx R E Uegpsit Errors and prior sale excepted.

Condition: used, Year of construction: 2014, operating hours: 240 h, fuel type: diesel, color: white, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Power: 417 Current frequency: 50 Hz Gjdpfxsyiltdj Agpeit Voltage: 380/400 Manufacturing country: United Kingdom

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: Gijdoyv Ezrjpfx Agpet • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm • Tooling: • Tool changer: 30 positions

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions Godpfx Aoiy Nppegpeit

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Gsdpfjyvqinox Agpeit Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available Gedpfxeydigme Agpjit good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Gisdpfsytkkfox Agpjt Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: new, Year of construction: 2024, NEW, unused machine!!! DN SOLUTIONS PUMA 5100LMB Year of manufacture: 2024 C-axis with driven tools Control: FANUC OiF touch Chuck: 21 inches (535 mm) Spindle bore: 166 mm Travels: X – 362 mm Z – 2,155 mm Maximum turning length: 2,002 mm Giedpfx Ajy H D Ufjgpjt Maximum turning diameter: 650 mm 12-position head BMT 75 Knoll chip conveyor

Condition: new, Year of construction: 2019, load capacity: 6 kg, arm reach: 900 mm, Coobot Doosan M0609 Load capacity: 6 kg Gjdpfequqrvox Agpeit Reach: 900 mm Repeatability: ±0.05 mm Condition: New

Condition: new, Year of construction: 2018, load capacity: 15 kg, arm reach: 900 mm, Cobot Doosan M1509 Giedpfx Agoquqrcspst Payload: 15 kg Reach: 900 mm Repeatability: ±0.05 mm Item condition: New

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm Gsdpfx Agsq Nqkxspjit

Condition: used, functionality: fully functional, machine/vehicle number: 0039, Year of construction: 2021, operating hours: 849 h, load capacity: 3,000 kg, lifting height: 6,290 mm, free lift: 1,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, power: 45 kW (61.18 HP), fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 2,730 mm, drive type: Diesel, construction width: 1,197 mm, Diesel forklift Chassis number: 0039 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Gisdpfx Asyvwt Hsgpot Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, interior mirror, LED,

Condition: used, Year of construction: 2020, Lathes Gsdpfxeyrfl Uo Agpjit Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm max. turning diameter: 850 mm max. circulation diameter: 420 mm spindle boring: 102 mm input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Gjdpfx Agjy E Ixxepjit Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm Gedpfx Agjyr R A Eopeit • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2022, CNC Lathe Doosan Puma 700 M II Control: Siemens Sinumeric 828 Year of manufacture: 2022 Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 stations (all driven) Tool holder: BMT 85P Giedpfx Agsyk Tdijpot Equipment: Self-centering steady rest Chip conveyor Touch setter 3-jaw chuck Programmable tailstock Extraction system Coolant pump 20 bar with cyclone filter Oil mist extractor

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor, Gjdox I N Rbepfx Agpjit