Used Doosan Mega 250 V for sale (310)

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Nwsdpfx Aaewq Iwxscjc Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2014, 900mm Swing, Nwjdpswwtrbefx Aacsc 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Nwjdpfx Asxm Sxveacsc Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Nodpsxv Udgsfx Aacowc Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, Nwedpfxsw I Tnij Aacsc 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 Nsdpfxoyair Us Aacjwc • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, spindle motor power: 3,700 W, total height: 1,730 mm, overall weight: 4,800 kg, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Additional equipment • LNS Quick Load Servo Bar Feeder Machine Benefits Technical Machine Benefits • Max. Turning diameter: 330 mm • Distance between centers: 510 mm • Type: auto turret servo • Tooling size: 25 mm (bmt) Nodsyaip Hjpfx Aacewc • Presetter • Coolant pump (high pressure) Extra Information Machine still under power Dimensions Machine Depth 3118 mm

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Nedpswmxflsfx Aacewc Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment • Motorized bar passage with counter-spindle Nsdpfox D Drvjx Aacewc • Complete with accessories and LNS bar loader Extra Information Machine still under power

Condition: used, Year of construction: 2007, CNC lathe, 2 axes, Doosan Puma 300LC year 2007 Fanuc 21iTB with Manual Guide - Z-axis: 1330 mm - X-axis: 282 mm turning diameter: 400 mm turning length: 1280 mm Samchully 12 inch (315 mm) chuck spindle bore: 103 mm turret for 10 tools tailstock tool probe - chip conveyor - coolant tank with pump Nodpfxsymlh Se Aacswc - machine documentation

Condition: like new (used), Year of construction: 2021, Technical data XYZ travel: 1270/670/625 mm Table: 1400 x 670 mm Spindle speed: 12,000 rpm Tool magazine: 30 positions Spindle: ISO 40 Control: Fanuc Nwodpfxeyinpgs Aacec Through-spindle coolant (IKZ): 20 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. Nodpfx Aex Uq Hdjacswc • Table Length: 1200 mm • Table Width: 650 mm • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper Nodpevhpr Hefx Aacowc * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,250 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Nedpfxsx Hgrao Aacewc

Condition: used, machine/vehicle number: FBA17-1390-00445, Year of construction: 2018, operating hours: 2,790 h, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, battery manufacturer: Midac, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 4.790 kg Battery: 620 Ah, 80 V, Year of manufacture 2018, Brand of battery Midac Lifting capacity: 2.500 kg Maximum passing height: 220 cm Nwedpeuballsfx Aacec Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: FBA17-1390-00801, Year of construction: 2020, operating hours: 1,191 h, free lift: 2,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Espex, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,600 mm, Weights Empty weight: 4.875 kg Battery Battery: 620 Ah, 80 V, Year of manufacture 2020, Brand of battery Espex Functional Lifting capacity: 2.500 kg Maximum passing height: 220 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Fork carriage: Sideshifter Latest inspection: 2024-02-22 Additional information Please contact Johanny Hendrikse for more information Nwedpfxerpgvys Aacec

Condition: excellent (used), machine/vehicle number: FRAOF-1380-00038, Year of construction: 2014, operating hours: 5,170 h, lifting height: 8,720 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: TAB, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, Battery: 750 Ah, 48 V, Year of manufacture 2017, Brand of battery TAB Lifting capacity: 1.600 kg Maximum passing height: 345 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Njdpfx Aaewdvz Eocewc Latest inspection: 2025-04-09 Please contact Johanny Hendrikse for more information

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; Nwjdpfx Ajylifrsacsc The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Gross price: PLN 32,595 Below you will find a link to a video showing the machine in operation.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. Nwedjycvpfepfx Aacoc 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. Nodpjxdwayjfx Aacjwc The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production.

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! Nodpfx Aeyfvtijacswc We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, machine/vehicle number: 16786, Year of construction: 2021, operating hours: 1,918 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, construction height: 2,200 mm, fork length: 1,200 mm, front tire size: 23/10-12, rear tire size: 18/7-8, overall weight: 4,854 kg, enginetype: Electric, manufacturer: Doosan Nsdpfxjx Rk Ele Aacewc

Condition: used, Year of construction: 2017, operating hours: 6,340 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Njdpfx Aaottzmnocjwc Digging depth: 10.795 m

Condition: used, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Nwsdpfjx Hgtwex Aacsc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Njdpsyftfijfx Aacewc Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.