Used Double Drill for sale (16,753)

Year of construction: 2021, condition: used, functionality: fully functional, This is a Hobart Premax AUPT-10B double-basket hood-type dishwasher, manufactured in 2021. It includes a matching supply and drain table. First commissioning: 07/11/2023 / Operating hours: 1450 / Washing cycles: 30008 This premium double-basket hood-type dishwasher offers double the capacity for simultaneously washing two baskets. The PERMANENT-CLEAN dirt removal system removes coarse dirt into an external filter. This saves operating costs and protects the machine. To ensure that hygienic final rinse temperatures are reached even when connected to a cold water supply, the machine has an automatic program time extension. For corner installations, we recommend that the right side of the machine is accessible for maintenance. We recommend water treatment for water hardness of 1°dH or higher. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The original list price of the machine with this equipment at the time of purchase was: €37,570.00 (gross). Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1345 x 915 x 1510 mm (+200 mm PERMANENT CLEAN system) Supply/drain table each 1200 mm Height with hood open: approx. 1995 mm Power connection: V: 400 / kW: 22.5 / A: 36.1 / Hz: 50 Weight: 252 Serial number: 867206655 Year of manufacture: 2021 Condition: used, major inspection carried out, fully functional. Further information: Basket size: 500 x 500 mm Tank capacity approx. 80 liters Water consumption approx. 1.4 L/basket Insertion height 440 mm Capacity up to max. 140 baskets/h, 2520 plates/h, 5040 glasses/h 8 automatic programs: Short, Standard, Intensive, Eco, Continuous wash, Cutlery, Hygiene and Heavy-duty programs. Program duration: 52/70/170/180 sec. and special programs Heat and sound insulated hood Multi-setting: The heating capacity can be reduced on-site from 12.4 kW to 6.2 kW when connected to a hot water supply. Self-cleaning program Filter contamination sensor USB interface for exporting operating and hygiene data Completely ready for connection: Supply and drain hoses, connection cable, liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Hood, tank, frame, wash arms and housing made of CrNi steel 1.4301 4 plate baskets P-18-12, 1 universal basket C-01-07 Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Fpjdpfx Aszmttusl Son Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 1950, Safag Type 27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial Number: 296 Year of Manufacture: Vintage 1950s (approx.) Dual 6" diamond grinding wheels with fine grit (700) Universal tool holder Tool holder for up to 10 mm square-shank tools Coolant tank mounted on the back of the machine Fjdpfx Aljh Izv Ao Sspn 3/4 HP main drive 220 Volts 3-phase Complete factory closure, large selection of storage platforms, pallet racking, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Spindle taper: MK3 Overhang: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Fodjz Ngr Ijpfx Al Sepn Dimensions: 1000x500x1970mm Weight approx. 400 kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm Fodpfezk N S Uex Al Sspn - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Fodpfxjzryuvj Al Sjpn Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 955 - Drive system: Conventional - Positieklemming: Hydraulic Fpjdpfxezrgc Hs Al Son - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Fsdpezza Nxjfx Al Sjpn Spindle guard

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1400394, Double miter saw, Fom Industrie BLITZ 60, 6.6 m, year of manufacture 2026. Equipped with a second and third intermediate profile support (pneumatically retractable), automatic profile height gauge with mobile sensor and vertical clamp, pneumatic lift roller on the loading side, central conveyor belt for chip removal, chip conveyor belt with inclined end (6.6 m version), software license for cutting with special dimensions and at variable angles, and label printer. Fjdsz Ngh Nepfx Al Sjpn

Condition: good (used), Used pillar drill from Bimak Fedpfx Alsz H Uz Dj Sspn Model 40 Capacity 40 mm

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Fedpfx Aloz Hmx Io Sspn Further details can be found in the data sheets.

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Fpodpfx Asz I Ivdjl Sjn Drilling unit: swiveling

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Fpodpfx Alezk Nwdj Sen Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm Fpodpfxsz I Ub Hj Al Sjn feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, - Did you know that energy costs can be reduced by up to 40%? - The thermal oil circulates evenly through the heating radiators at temperatures up to 300°C. The heat is distributed gently and consistently over the products. Fjdpfjz Imk Hjx Al Sepn - Control: PLC touchscreen control panel (including Dutch language option) with memory for 199 automatic baking programs, each with 5 phases. - Advantages: Energy-efficient, very quiet in operation, precise temperature control, and prevents products from drying out. - Heating: Connection to a central thermal oil system (no separate gas burner or flue gas system required in the bakery). - Trolley capacity: Suitable for 1 or 2 trolleys/carts (standard trolley sizes such as 600 x 800 mm or 600 x 1000 mm). - Extremely suitable for medium-sized to large bakeries. - Heating power: approx. 80 kW - Electrical connection power: approx. 4.6 kW - Electrical connection: 400V three-phase power - Control voltage: 230V - Heating: Oil-fired

Condition: used, Closes sausages and mortadella with a clip on both ends The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start. The machine sits on a stainless cabinet with castors, with an outfeed chute and roller conveyor for the product. It is pneumatically driven. We did not find a rating plate with the year. Fpjdpfoz Nc U Dox Al Sjn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic double clipper Application: Mortadella and large sausage calibres Drive: Pneumatic Outfeed: Chute and roller conveyor Construction: Stainless cabinet on castors

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Fsdpfx Asz N Ixcsl Sopn Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fjdjzry Ntjpfx Al Sspn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilting drilling RWH drilling Sawing Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals between PC and PLC 1. Data handling is performed exclusively by the PC. 2. The clamping system sends a transmission release (VB.SendRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake signal (VB.DataSent) when the data has been transmitted. 4. Then, the VB.SendRelease and VB.DataSent signals are deactivated by the clamping system. Fpodpfxevdb Tbs Al Ssn 5. This procedure is initiated again for each new component. More new and used items can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Fpodpfxjz Nyvyo Al Sjn Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face Fpedpszn Ah Rofx Al Sjn - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Fpsdpfx Aloyt Spcj Sen

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Fodpsz Ntr Iofx Al Sopn Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Year of construction: 2021, condition: new, Several high-quality Hilti diamond core drills/core drilling bits in various diameters are for sale. Available diameters: * 2 × Ø 202 mm * 1 × Ø 250 mm * 1 × Ø 300 mm * 1 × Ø 350 mm * 1 × Ø 400 mm * 1 × Ø 450 mm Fpjdsz I Rmljpfx Al Ssn * 1 × Ø 500 mm Technical specifications: Manufacturer: Hilti Type: Diamond core drills for concrete Drilling method: Wet drilling Drilling mode: Stand-mounted Working length: 450 mm Interface/Mounting: BU (Hilti) Segments: Laser-welded Product class: Premium Suitable for or usable with Hilti core drilling systems, depending on the diameter/design: * Hilti DD 200 * Hilti DD 250-CA * Hilti DD 350-CA These core drills come from our inventory and are being sold due to non-use. The original new prices range from several hundred to over €2,000 per core drill, depending on the diameter. Individual sale as well as sale as a complete package is possible. A corresponding price agreement is possible when purchasing multiple core drills. Inspection and collection are possible by arrangement. Also included in the offer: Hilti DD-BS-ET 500 core drill extension * Extension for Hilti diamond core drills/core drilling systems * Length: 500 mm * Original Hilti accessory * For extending the possible drilling depth * Sold together with the offered Hilti core drills The core drills and the DD-BS-ET 500 extension are being sold due to non-use. All information is provided to the best of our knowledge. Technical data and compatibility should be checked before use based on the respective Hilti system.

Condition: good (used), Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance, or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 path control system. Thanks to its clear-text dialogue guidance, it can be programmed extremely easily directly on the machine, supports graphic simulations, and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital display), positioning with manual input, single block, sequence of blocks, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed drives & travels Travel in X-axis (table longitudinal, automatic): 630 mm Travel in Y-axis (spindle carriage transverse, automatic): 500 mm Travel in Z-axis (table vertical, automatic): 460 mm (p. 1) Feed rate: continuously adjustable from 1 – 3000 mm/min in all 3 axes Rapid traverse rate: X and Y axes: 6000 mm/min | Z axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and rotary table) Milling spindle drive Working spindle speeds: 21 gear stages Speed range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M 16 with draw-in groove (SK 40 DIN 2080) Fpedpfxezcqf Is Al Sjn Arbor movement (vertical): 90 mm Table geometry & workpiece capacity Rotary table clamping surface: 500 x 1000 mm T-slots: 7 pieces (distance: 63 mm, width: 14-H7 mm) Clamping surface perpendicular: 397 x 550 mm (with 4 x 4 threaded holes M16, distance 90 mm) Max. recommended workpiece weight: 500 kg Electrical system & cooling Electrical connection power: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Net machine dimensions: 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. space requirement during operation (including control console): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (including vertical milling head and rotary table) Product video “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Fpodpfx Aloz Ixmae Son Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.