Used Double Edger for sale (10,997)

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system Godpfovwgm Hox Abdebg for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm Gbodsd Im Nuepfx Abdog output: 300/600 nails/min.

Condition: used, Hydraulic power unit, hydro power unit with double pump, tandem pump, hydraulic unit Manufacturer likely Italian Type: PF1/1-2.8/2.8 Year of manufacture: approx. 2000 Gbjdpfoxrgt Sex Abdog Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/min. (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Power supply: 220 volts, 50 Hz - Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 - 1 return filter - 2 pressure gauges - Tank dimensions (L/W/H): 320 x 300 x 290 mm - Pressure port connections at the hydraulic pump outlet: 10L Installation space required (L x W x H): 600 x 400 x 600 mm Net weight: approx. 70 kg Very good condition

Year of construction: 2004, condition: good (used), Machine frame DG 104 M made of steel sheet (cutting length 6,000 mm) Profiled lifting bars Movable or automatically retractable workpiece supports Material clamping units Cross stop and head stop Exhaust connections, extraction system Timer system Roller conveyors Saw blades High-performance cutting fluid Gsdpfx Aex Rinrebdebg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2179, The Diskus DDS 750 XRE is a double-sided surface grinding machine from Diskus's DDS series, designed for precision flat and plunge grinding. Although the exact year of manufacture (2012) is not specified, the technical data for the XRE variant are as follows: Gedpswnrv Tefx Abdobg Technical Data of the Diskus DDS 750 XRE * Grinding wheel diameter: 750 mm * Maximum workpiece diameter: * Through-feed grinding: 420 mm * Plunge-cut grinding: 300 mm * Grinding width: * Through-feed grinding: up to 180 mm * Plunge-cut grinding: up to 300 mm * Maximum material thickness: * Through-feed grinding: 30 mm * Plunge-cut grinding: 80 mm * Grinding spindle drive power: * Spindle 1: 48 kW * Spindle 2: 48 kW * Feed system: rotary feed * Feed rates: * Maximum: 20 mm/min * Minimum: 240 mm/min * Dimensions: * Required floor space (L × W): 4900 mm × 5000 mm * Total height: 3100 mm * Weight: approx. 13,000 kg * Control system: Siemens 840 D CNC * Measuring control: Diskus IONIC 17A This machine is particularly suitable for machining workpieces made from corundum, CBN, or diamond and is used in sectors such as the automotive industry, gearbox manufacturing, hydraulics and pump technology, as well as the bearing industry. For further information or specific inquiries regarding the year of manufacture 2012, I recommend contacting Diskus Werke Schleiftechnik GmbH directly.

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Gbsdpfxjvuuhys Abdog Side window 900 mm Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm Gbedovwglvepfx Abdog weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: used, mileage: 82,015 km, power: 125 kW (169.95 HP), first registration: 12/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: diesel, CO₂ emissions: 280 g/km, fuel tank capacity: 71 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, loading space length: 2,700 mm, loading space width: 2,030 mm, Year of construction: 2020, Equipment: ABS, Apple CarPlay, air conditioning, central locking, cruise control, electric window regulation, full service history, onboard computer, power mirror, start-stop system, tire pressure monitoring, trailer coupling, = Additional Options and Equipment = - Attention assist - Automatic dipped headlights - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver’s seat - Height-adjustable steering wheel - Height-adjustable front seats - Keyless start Gsdpfx Aboxxz Rxodebg - LED headlights - Leather steering wheel - Front centre armrest - Multifunction steering wheel - Radio with DAB - Rain sensor - Immobiliser - Thermal glazing - Toolbox = Further Information = General Information Number of doors: 2 Model range: June 2020 - Dec. 2021 Cab: double Technical Information Torque: 400 Nm Number of cylinders: 4 Engine capacity: 1,950 cc Dimensions Length/height: L2 Weights Unladen weight: 2,272 kg Payload: 1,228 kg Gross vehicle weight: 3,500 kg Max. towed load: 3,500 kg (unbraked: 750 kg) Interior Interior: Black Consumption Average fuel consumption: 8 l/100km Service, History and Condition APK (main technical inspection): valid until 12/2026 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, maximum load weight: 33,073 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Information in English: Cooling unit brand: Thermo King Additional information: Gbodpfsx Ralusx Abdjg * Curb weight: 8,927 kg * Type | First axle: Goodyear * Tire size | First axle: 385/65 R22.5 * Tire tread depth inside left | First axle: 60% * Tire tread depth inside right | First axle: 60% * Maximum axle load | First axle: 9,000 kg * Type | Second axle: Goodyear * Type | Third axle: Goodyear * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inside left | Second axle: 40% * Tire tread depth inside left | Third axle: 40% * Tire tread depth inside right | Second axle: 40% * Tire tread depth inside right | Third axle: 40% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Axle position | First axle: Rear * Brand | First axle: Other * Axle position | Second axle: Rear * Axle position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Homepage * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please check in advance about costs and procedures for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Specifications subject to change and prior sale. Errors reserved. Mentioned prices are excluding BPM and valid for export only.

Condition: used, mileage: 24,665 km, power: 103 kW (140.04 HP), first registration: 04/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of gears: 5, number of seats: 7, Year of construction: 1992, Number of doors: 4 Number of cylinders: 4 Maximum speed: 110 km/h Gbedpfx Aboxvqtkedog Interior: black Number of keys: 2

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 Gbjdpovuubgofx Abdsg with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t Godpfxsvut Ife Abdjbg stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available Gbjdpfxjvut Dys Abdeg

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t Gedpfov Svarsx Abdobg dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m Gbodpfxjwc U Nls Abdeg height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm Gbsdpfxjv Sva Eo Abdeg length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l Gedpfovuk Trjx Abdsbg power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm Gbsdpfxevuk S Us Abdog power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm Gedpfx Abevzxrvjdebg table surface area 980 x 500 mm table height above floor 850 mm ram surface 130 mm speed down 400 mm/s speed up 461 mm/s working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Gbsdpfx Asvuuk Isbdog Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm Gedovuukbspfx Abdebg stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Gedpfevuui Dex Abdobg

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm Gbsdpjvuuiwsfx Abdeg side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1980, pressure 50 t distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm ram surface 1700 x 750 mm power requirement 11,0 kW Gsdpfx Absvuk Ngjdobg weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW Gjdpfx Asvuk Naobdsbg weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA) can be offered without putting into operation or alternatively with new control Siemens S7-1500F