Double Planer

Cremona

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Fpedpfsw I E Dpex Abusc

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Fsdpfx Aev Si Szobuspc Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1999, condition: ready for operation (used), Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible. Fedpfxew I E D Aj Abuepc

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Fpodpjw I E Dvefx Abujc

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Fodpjv Hygfsfx Abuopc

Condition: good (used), Brand: Cremona Technical condition: Very good Technical details: Maximum log length: 2350 mm Fpsdpfx Aeryxa Nebuec Minimum log length: 770 mm Maximum log diameter: 740 mm Maximum veneer thickness: 4 mm

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Veneer unwinding Bertram - 1995 Fjdpfxjt D A S Io Abuopc To be dismantled by buyer

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Fsdpfovwfhijx Abujpc

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul. Fjdpsvndvyofx Abujpc

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 Fpedpfevm An Eox Abuec 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Fpsdpfx Abowxdqkoujc Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 2,050 mm, input frequency: 50 Hz, Complete decoiling line including: - 3-strand infeed dock - A. CREMONA type CE12 year 1995 - A. CREMONA type SFH 2050x1200 year 1995. Fsdpfsul S D Nex Abuopc - Intermediate conveyor with cell detection of open defects. - A. CREMONA ROTAX 2100 year 1995. - Transport and separation conveyor to stacker. - Waste return conveyor. - A. CREMONA vacuum stacker. CREMONA 4 stations, with lifting tables. - Total length 37m (excluding infeed platform). -Total installed power: 360 kW - 400V-50 Hz

Condition: good (used), Year of construction: 1980, functionality: fully functional, Complete peeling line for exotic woods consisting of : HAWA crosscut saw + debarker 2-strand infeed dock. Automatic centering machine year 2018. A. CREMONA SF 3300x2020 3-storey Müller coil store. 2 OLM ESTA 2000 and 3300 veneer stacker extractors. Boiler SUGIMAT SH40-2500-2T 2,9 MW year 2011.2 VECOPLAN VTH 800/2T mill Fjdpfx Aoul Tc Tobuepc Functional unit

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Fpodpfx Aeya Ik Ajbusc Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74