Used Double Saw for sale (17,703)

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg Hjdpfogy Dbdsx Ag Nsnu

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, OMS FC330R Double Mitre Saw for Wood, Aluminium 2 x 2.2 kW Specification: Hnodjxdxkgjpfx Ag Nou • Condition – used, after maintenance/service • Manufacturer – OMS • Model – FC 330 R • Main motors – 2 x 2.2 kW • Hydraulic-pneumatic control • Max. cutting length – 351 cm • Min. cutting length – 36 cm • Max. cutting cross-section – 70x160 mm (at right angle) • Max. blade diameter – 330 mm • Extraction ports Ø 60 mm • Cutting angle range from -45 to +45 degrees (right, left) • Vertical clamps for the workpieces • Weight – approx. 600 kg • Overall dimensions – 405 x 100 x 145 cm (L x W x H) Additional information: • Very good, factory technical condition • The photos show the actual condition of the item for sale • Machine can be powered up and tested on site

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm Hsdpfjv Hgb Nsx Ag Njnu cutting height: max. approx. 80 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, saw blade diameter: 550 mm, pivoting range: 15 °, input voltage: 380 V, Emmegi Double Mitre Saw Precision TS2 with Emmegi MG 4 Extraction Unit Hedpfx Asw Ambajg Nonu All built in 2019 Double mitre saw with 3 CNC-controlled axes, featuring an automatically movable head and electronic control of all mitre angles from 45° (internal) to 15° (external) - 550mm saw blades - 4 clamps (2 from above and 2 from the front) - Cutting of oversized lengths possible up to 10,000mm - Import from Logikal or similar calculation software enabled - Includes extraction unit and extraction control (extraction hose included) - PRO software (oversize cutting, undersize cutting, cross cutting, wedge cutting) - Profile support roller conveyor on movable unit Extraction Unit Emmegi MG 4 - Motor power 2.2 kW - 2 extraction ports - Antistatic bag filter - Large chip container - Automatic start via electrical connection to the machine - Manual switch for machine cleaning available

Condition: good (used), functionality: fully functional, FOM BLITZ 2 double-head mitre saw Hsdpfx Agsw Dp A Ne Nsnu Available for demonstration in our premises Equipment price includes loading Transport and installation available at extra cost.

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm Hnjdpevwgnwjfx Ag Nju cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm Hjdpegylq Isfx Ag Nenu -Total weight: 234 kg

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Hjdpeg Db U Aofx Ag Nsnu

Condition: used, Year of construction: 2006, operating hours: 1,500 h, functionality: unexamined, machine/vehicle number: 0799335115, cutting length (max.): 4,500 mm, The machine was purchased used and never used. It's in good condition. Hjdpfxswir D Tj Ag Njnu

Condition: good (used), Year of construction: 2020, usefull lenght : 6000 mm blades 550 mm cutting angles: -45°/+15° extra pneumatic clamps Labelprinter Hodevvauuepfx Ag Nenu Software Pro and Slice HMI importdriver

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical information – Elumatec DG 244/2 year 2008 Control unit model: E355 Main electrical connection: 3/PEN/400V - 50 Hz Power consumption: 12.8 kW Additional information Advantages of the machine Technical advantages of the machine: - Saw blade diameter: 550 mm - Saw blade speed: 2,800 rpm - Compressed air supply: 7 bar - Weight: 1,850 kg Machine can be inspected in operation in department 76 Available from week S38/S39 Price includes loading Hsdpfew A Iubex Ag Nonu

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg Hnedpfx Agev U Dlus Nsu feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: excellent (used), Year of construction: 1995, Machine in continuous operation (aluminium window production) HAFFNER DGS 187: Hnsdpfxoxa Almj Ag Nju Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 × 30 mm Motor output: 2 × 3 kW Cutting length: 5,100 mm Speed: 2,800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Overall dimensions: approx. 6,100 × 1,450 × 1,450 mm

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Hodpfx Aeq Ii Dlog Nonu Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LC191, cutting length (max.): 7,000 mm, air pressure: 8 bar, Double head radial saw machine. Hsdpfxswm Hl Hs Ag Nonu

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Connected load: 9.37 kW Hnedjw E D E Uepfx Ag Nju

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, saw blade speed: 2,800 rpm, air pressure: 7 bar, Double-head saw for cutting aluminium and PVC profiles. Features a short-length stop, E555 electronics, two sliding profile holders. Rollers on the movable head. Lubricators for blade lubrication when cutting aluminium. Hedpsxb Anqefx Ag Nsnu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Weight 3500 kg Hodpevz Hxqjfx Ag Nsnu Total power requirement 94,75 kw

Condition: good (used), Year of construction: 1997, Double mitre saw RAPID DGS 200 year of construction 1997 drive 2 x 2,2 KW, 400 V swivelling range manual 45° to 90 Saw blade 420 mm Ø Hsdpfx Agehctt Eo Nenu Saw feed pneumatic cutting length 4000 mm Profile clamping 2 pcs. horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment manual Length display digital Air pressure 7 bar Profile support fixed outside and movable in the middle dimension L/W/H 5200/1200/1500 mm Weight 800 kg

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm Hjdpsi Ezwmsfx Ag Nonu main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm Hjdpfxoq Atyze Ag Nonu With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Year of construction: 1998, condition: used, functionality: fully functional, Rapid dgl the saw blades automatically adjust to the desired dimension, control via touch panel, blade diameter 500 mm rotation speed 2710 cutting angle 45-90° cutting length approx. 3000 mm pneumatic clamping air requirement 200 NI the saw is in excellent condition, ready for immediate use, testing possible, Hodpfx Agew I Hz Ae Nsnu invoice issued

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION Hnedpfsw Ucwajx Ag Neu NET PRICE

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 2 kW (2.72 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW Hjdpfxjtvpfmo Ag Njnu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 4,500 mm, Saw blade diameter: 420 mm Max. cutting length: 4500 mm Min. cutting length: 335 mm Automatic length positioning, control with Windows and USB connection Accompanying roller conveyor Weight: approx. 1800 kg Hnjdpow Tua Rofx Ag Nou