7
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and more feed ...
6
Model: TAG T13 HP
Operating units:
(1) longitudinal sanding belts
Ytwu28
(2) transverse sanding belt
Configuration: Transverse slipper, Roller, slipper-finish,
Use: For sanding veneered doors and varnish
Working width: 1,350 mm
Working thickness: yes 3 and 150 mm
Worktop height from the floor: 900 mm +/- 20 mm
Feed rate: 6-30 m / min.
Serving side: Right
Commands: Right
Electrical cabinet: On the machine , PLC Controil
Color: RAL 7035
Voltage: 400 V, 50 Hz, 3 P
Compressed air pressure: 6 bar
C...
7
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
Bqgtckboo9
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and...
2
With two edger, verifier and feed conveyor, machine was not used.
Saxqhmpg
6
used machine, functional.
Incl. accessories according to photos + belt filter system
Bnket8l7ec
without warranty
6
vertical lowE grinding system for squares
Single mode or in front of IG line
direction: left - right
max. height: 2500 mm
Qdmmj
max. length: 2500 mm
grinding width: 10 or 20 mm
9
Automatic grinding machine for sharpening saw blades VOLLMER CHT
TECHNICAL DATA:
outer diameter from 80 to 630 mm
Hole diameter from 10 mm
Blade thickness up to 14 mm
Tooth pitch 6 to 90 mm
Ebrjemhbi
Rake angle from -5 to +30 degrees
Relief angle from + 7 to + 30 degrees
Miter cuts up to 45 degrees
Working speed up to 10 teeth / min
Grinding speed 0.5 to 6 mm / sec
Grinding wheel:
125 mm outside diameter
Hole diameter 32mm
Working width: 150mm, workpiece length: min. 350mm.
7eamnxe8b
2
AUTOMATICAL MACHINE FOR SIDE GRINDING STELITE TIPPED BLADES WCS:
- Voltage 400 V 1,6 kW
- Bandsawblade thickness 0-9 mm
- Tooth shape All types
- Thooth step 5-50 mm
- Tooth side angle 0°-8°
- Bandsawblade lenght from 5500 mm
- Bandsawblade width 70-280 (300-350) mm
Fb80bwp
- Grind disk 100x20x50 mm
- Grinding speed 12 I 24 teeth / min. (3-22)
- Machine dimension h 1380x w 1100x l 1050 mm
10
Automatic single head saw, blade Ø 500 mm + conveyor K-3000 (length 3m) right hand side as standard
APPLICATION:
For cutting aluminum, plastics and wooden profiles
FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to protective cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Possibility to cut at any intermediate angle between
- 67.5° to + 45°
- Speed regulation based on the type of profile to be cut
- Horizontal and vertical pneumatic clamps
Iwqqn...
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Bnlwiwyfgv
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
12
As Turkey's leading concrete block machine manufacturer, we provide quality service to you with a brick making machine . concrete block machine we produce for many countries of the world have the best equipment and design. We are always a solution partner for those who are looking for concrete blocks machine for sale.
In addition, our company helps you with concrete block making machine equipment and parts and produces fast results for you with its wide product range.
The products we produce ...
12
Tool grinding machine (shank milling machine) make HOSOI Machine type S.T.E.C
Year of manufacture 1982
technical data:
Vgiwifha
electrical connection 380 V, 50 Hz
driving power 0,4 kW
We need space! SPECIAL PRICE
11
see pictures
B7xlukxv2b
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
Bhhx2keocu
LJ308A
-new machine
7
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
Dewfamxdy
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from bei...
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Zthyl0f7
Blade Size: 9745.20.0.5.18TPI
15
Working area size 2000х630х630mm
Cnk8ixrq
Max grinding wheel size 500mm
Power 30kW
Overall dimensions of the machine, ~ 5950x2860x2860mm
Machine weight with attached equipment, kg 15500
Is operational
7
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
5
LEO R
Fully automatic, digital single-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Automatic operating system
Muwcmk
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all stages between -22.5 °C and + 45 °C with servo motion system
- Batch processing and precision cutting
- Programming process and large memory
- remote access
- Data transfer via Ethernet and USB
- industrial...
4
Radial automatic single head saw LEO X with servo
As standard:
- 550mm target
- refrigeration system
- digital conveyor right 1pc
- automatic positioning of any angle between 30-90
degrees
- hydro-pneumatic cutting depth setting
- 3kW engine power
- cutting zone cover
- horizontal pneumatic clamps
Bhm0dpjn2c
- data transmission over the network, Ethernet, USB
- PC (IPC) HMI touch screen
Options for a surcharge:
- vertical pneumatic clamps
- chip extraction
- left-hand conveyor
- barcode printe...
2
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- Shield Ø...
8
METEOR I 420
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
⦁ Hydropneumatic cutting
⦁ Safe cutting thanks to safety sensor cover
⦁ 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
⦁ Can be cut in any intermediate angle between - 45 ° to + 45 °
⦁ Speed adjustment depending on the profile to be cut
⦁ Horizontal (2pc) and vertical (2pc) pneumatic clamps
STANDARD EQUIPM...
4
VEGA - II
Automatic single head saw, blade Ø 400 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic safe cutting process
- Horizontal and vertical pneumatic clamps
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Can be cut in any intermediate angle between
-45 ° to + 45 °
- Impact-resistant cast iron core
Dbjafygvq
- Cutting speed adjustment based on the type of profile to be cut
STANDARD EQUIPMENT
- Service ring wrench
- Disc Ø 400 mm
- ...
6
GEMINI - II A
Semi-automatic, digital twin-head cutting-off machine, 2x blade Ø 400 mm, twin-cutting
APPLICATION:
For cutting aluminium, plastics and wooden profiles
MAIN FEATURES:
- Hydro-pneumatic cutting
- Safe cuts thanks to the fitting of a cover.
- Manual positioning at all stages between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles - quick manual adjustment
- Automatic positioning of cutting length
- PLC control system
- Possibility of storing dimensions
- Touch s...
3
GEMINI VI
Automatic, digital twin-headed, 2x Ø 600 mm automatic angle saw blade
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 410mm to 5050mm (between heads), max. profile length in loading 8000m...
4
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT THE TYPE OF...
6
GEMINI V R - disc extension up to 185mm
Fully automatic, digital twin-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- slice function
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo system
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- Touch control p...
3
POLAR - V (price without cutter)
Automatic milling machine with pneumatic blade change
Maximum dimension of the milled profile: 275x180mm
2aqf3y9z
APPLICATION:
For final milling of aluminum and PVC profiles
FEATURES:
- Hydro-pneumatic operation
- Vertical and horizontal pneumatic clamps
- Operation protected by a cover equipped with a safety sensor
- Automatic return to starting point
- Milling at various angles
- Simple blade replacement
- Infeed conveyor
The price is net price.
Warranty 12 mon...
7
APEX II
Automatic double-headed hydraulic compactor
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Hydraulic operating system
- Manual positioning, automatic operating system
- Adjustable clamping system for wide profiles
- Easy adjustment of clamping blade distances based on the profile
- Two-stage hydraulic pressure setting
- Assembly without size changes in the corner assembly processes
- Crimping profiles in wid...
6
APEX IV
Automatic four-head hydraulic crimping machine for aluminium profiles used in the production of window and door joinery
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Automatic positioning with servo control
- Touch screen
- Adjustable clamping system for high profiles
- Profile-based adjustment of kneading blades
- Hydraulic operating system
- Two-stage hydraulic pressure setting
Bhmy9nlfdj
- Safe working a...
3
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
Bhmz0hu9od
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC c...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
Muvqww
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and le...
6
GEMINI IV SA
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
- Cutting capacity of 4000mm and 6000mm profiles with built-in...
4
GEMINI X (disc extension up to 418mm)
Automatic radial bi-head cutting-off saw,
2x Ø 550 mm blade with large cutting range
Bhmglcklqy
APPLICATION:
For cutting aluminium, plastics
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all steps between 30° and 90° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 450mm to 6000mm (between heads), maximum ...
4
Automatic miter saw- Bewo 250mm
- Max saw diameter 85mm
- Length supply conveyor 6100mm
Jadbhgwz8
14
Cylindrical grinder grinding machine
Model: Inside and outside
B9slijdsa2
Manufacturer:  CC Brugeoise
Centerdistance: 800mm
Grinding wheel: 300mm
Main-motor power: 3kW
4
width of the strips 150 mm
band length 2000 mm
band speed 14,5 / 29 m/sec
grinding width 460 x 150 Plantisch mm
Dust suction hood 100 mm
total power requirement 4,0 kW 100% ED
weight 84,0 kg
range L-W-H 1.080x520x1000 mm
** Standard with 2 speeds, ideal for grinding stainless steel
properties
- Good sanding performance due to high belt speed
- Quick adjustment for horizontal and inclined position
- Continuous flat grinding surface for optimal grinding of long workpieces
- Constant belt tensi...
Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinding machine, drill grinding machine, bench grinder
-Manufacturer: Wilhelm Simon, tool grinding machine with 2 stations
-Motor power: 1 kW
P2o0r
-Speed: 2800 rpm
-Grinding disks: Ø max. 150 mm
-Coolant system: pump is missing, can be replaced at an additional cost
-Dimensions: 1430/780 / H1380 mm
-Weight: 456 kg
5
grinding diameter:250 mm
grinding length:1000 mm
centre height:125 mm
Distance between centres:1000 mm
grinding slide speed stepless:0,001 - 100,0 mm/min
grinding head swivelling (longit. axis):270 Grad
grinding wheel dia. x width:300/400 x 63/40 mm
grinding spindle drive:4,5 kW
grinding spindle speed:1750 U/min
total power requirement:10 kW
weight of the machine ca.:4 t
Machine suitable for cylindrical-, and face grinding
- CNC control KELCO 70
- Balancing device Electrobalance
- left/right sp...
11
Surface grinder, grinding machine
Manufacturer: Jakobsen
Manufacturer digital: Sony
Travel: 400x200x650mm
0fhagfoh
Magnet-table: 400x200mm
Including multiple peripherals and grinding-tooling
10
width of the strips 50 mm
band length 940 mm
band speed 3 - 22 m/min
turning speeds 1450 U/min
tube diameter 16 - 114 mm
radius 180 °
total power requirement 4,75 kW
weight of the machine ca. 265 kg.
range L-W-H 1.000x750x1.300 mm
Beobhj8zwn
Furnishing:
- stationary pipe belt grinders
- Automatic material feed with separate drive motor
- Replacement sanding belts
- Stepless speed adjustment
- Manual adjustment of tube tension
- Polish bent pipes up to 180" (angle).
- Manual work possible with...