Used Driving Device for sale (29,132)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Hodpfewc Nvgjx Addsfb Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Measuring height 600 mm Resolution 0.001 mm Hodpfx Adex Ey N Nedsfb Misc. accessories MARCELS MASCHINEN AG

Condition: used, KRONES AG Monoblock (with Sauerstein SD 1500/1100/950 unit and KRONES cooling device Manufacturer KRONES AG – Neutraubling, Germany Type Stainless-steel guarded industrial monoblock (in-line integrated unit) with process and cooling auxiliaries Industrial Applications KRONES in-line unit for automated packaging environments requiring a protected enclosure, continuous conveyor operation, and integrated auxiliaries. The configuration shown includes a Sauerstein air unit and a KRONES cooling device for thermal control of integrated equipment/cabinets. Main Technical Specifications Air unit (Sauerstein nameplate) - Brand: Sauerstein - Type: SD 1500/1100/950 - Reference (Kom.): 10.462 - Year (Baujahr): 01/10 Cooling device (KRONES nameplate – Kühlergerät) - Part-No: Serial-No: M6530292550 - Supply: 230 V, 50/60 Hz, 2~N - Rated / start current: 1.5 A / 3.2 A - Power input: 315 W - Cooling capacity: 320 W - Refrigerant: R134a, 96 g - Protection rating: IP54 / IP24 In/Out - Max pressure: PS35 / PO30 bar - Year: Fuse: 6 A T - Operating range (min./max.): 20 °C – 55 °C - Internal minimum setpoint: 35 °C - Weight: 13 kg - Manufacturing: Malta (European Union) - Markings: CE, cRUus Machine Usage This KRONES monoblock is an in-line integrated unit designed for industrial operation within a guarded enclosure. The identified auxiliaries provide process support functions, combining air handling via the Sauerstein module and dedicated cooling via the KRONES unit to maintain thermal stability of on-board equipment. Hodpfsx N Utdex Addsfb Features / Differentiators - Guarded stainless-steel monoblock design suited for automated production areas. - Integrated KRONES cooling device with 320 W cooling capacity and R134a refrigerant, engineered for industrial duty (IP54). - Full traceability of auxiliaries through part numbers and serial numbers (Sauerstein SD 1500/1100/950, KRONES , M6530292550).

Condition: new, Year of construction: 2025, functionality: fully functional, The SS-M screw separator from MASS is available for sale; Hodpfxsx E Ry Se Addsfb Height: 1500 mm Screw length: 800 mm Overall width: 1060 mm Inclination angle: 30 degrees Profile: 9 mm Gap adjustment possible via wheel

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood Hsdpfx Adoxmv H Redsfb - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition Hjdpfxsxf Uw Sj Addsfb

Condition: excellent (used), White Type: SC/KWT 450 Hsdpfxjw Strcj Addsfb Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Mechanization Hfodpfxer Eh Uho Addob Infeed loading device consisting of 1 x conveyor belt with stop and pusher 1 x roller conveyor 1 x cross slide drive unit by means of servomotor For example, ideal for: A) In front of a planing machine with multi-blade saw B) In front of resaw or other saw C) At the infeed of other machines Condition as is and without electric control Electric control on request and at extra cost.

Condition: used, Year of construction: 2006, Used, in excellent condition Low operating hours Ex-government unit Manufacturer: Alko Hodpfjx Nqvhox Addefb Model: Power Unit 300 P Year of manufacture: 2006 Clean air unit / negative pressure GS dust certified CE type tested Motor 7.5 kW Connection diameter 300 mm Pressure 2,400 Pa Airflow 6,000 m³/h Collection drums 900x600 mm Filter area 30 m² Automatic/pneumatic filter cleaning Filter pressure monitor Soundproofed Integrated extinguishing system Original price approx. 19,545 EUR Space required approx. 3,000x1,058x2,361 mm Weight approx. 880 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening Hfedpfocnw U Dox Addjb

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm Hfjdpfx Adexn Awxsdsb • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm Hfjdovyq Duspfx Addeb -Weight: 12.1 kg

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Hfsdpfx Asv Hnz Dsddeb Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Hedeu Nuycspfx Addjfb

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, input voltage: 230 V, control voltage: 230 V, hopper volume: 75 l, temperature: 150 °C, MATERIAL DRYER + 2 MATERIAL LOADERS incl. Accessories We offer for sale a set of peripherals for drying and transporting plastic granulate from the company NEW OMAP. The devices are in "like new" condition and were used only for testing purposes in the dealer's showroom. Only the entire set is for sale according to the definition below. NEW OMAP device set: 1pc Material dryer WDC.E25 MT-75 (honeycomb design, incl. needle, and hose for material suction + NEBULA remote control system) 2pc Single phase material Loader AM.E05 1pc Hopper TR40 1pc Tank CT80 (on whels) *we will be happy to send detailed technical specifications upon request Terms and Conditions: Delivery terms: FCA (Incoterms 2020), České Budějovice, Czech Republic Hfsdpfx Aexnmw Asddsb Payment terms: 100% of the purchase price payable prior to delivery based on proforma invoice Delivery time: Available within 1 week from signing the purchase agreement and realizing the payment Warranty: 3 months since delivery. This is a used device from our showroom. The customer has the opportunity to inspect the unit prior to delivery, including a functional test. Price: 7700 € without VAT

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Hfedpfxocqy I Se Addsb Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: good (used), Spectro CIROS CCD Water Analyser - height: 105cm - width: 150cm - depth: 75cm Hjdpfofiqn Uox Addefb Good condition fully functional can be inspected and tested on site. Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: used, Year of construction: 2024, operating hours: 315 h, machine/vehicle number: 36373, fuel type: diesel, Empty weight: 3.425 kg Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Hfedpfsvf T Uyox Addsb Tyre brand: - Max. horizontal reach: 1700 m Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data rate: 50 Hz Hodpfsxvxwksx Addefb Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: used, used extraction unit Hfedsw I U Sispfx Addjb mobile extraction nozzle 120 mm motor 0.75 kW 1180 Pa Availability: approx. end of May/beginning of June Stock location: Aschaffenburg

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Model UNICLAMP Machine type: Mechanical clamping system Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Hedpfx Aewmr Tvsddsfb Clamping height: 15 - 55 Height: 48 mm, with quick-release coupling Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes Hjdpfx Adoxg Hrkodefb - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Hfedpfxoxdtkue Addeb Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: Hfedpfxscnw T Io Addsb With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Hfjdpfecdy I Rex Addeb Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg