Used E Press for sale (75,807)

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack Godpfxjflt Ebj Adbjbi - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, total width: 1,300 mm, total length: 2,800 mm, total height: 2,000 mm, overall weight: 3,000 kg, pressing force: 70 t, opening width: 300 mm, cylinder diameter: 70 mm, No. 04524 Veneer press Italpresse MEC 4S Used Gold anodized heating plates in very good condition Plate dimensions 2200 x 1100 mm LW Heating plates electrically heated Pressing process electro-hydraulic Total pressure 70 tons 4 hydraulic cylinders each 70 mm diameter Hydraulic cylinders and pistons are made of a special steel and chrome-plated Opening width 300 mm Emergency stop safety rip cord all around The press table is guided in parallel by means of 2 racks Button control for closing / opening Electromagnetic 2-stage hydraulic pump Transport dimensions approx. 2800 x 1300 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Gbsdpfx Adsyninrsbsi Terms of delivery: ex warehouse

Condition: good (used), Load lifter / lifting aid, Expresso, Lift&Drive 85 – used - : Price ex location: €950 (net) Manufacturer: Expresso Model: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70 kg Charging voltage: 230V, 50Hz Battery voltage: 18V / AH Condition: good Available: immediately Location: Waltrop Gbodpoyhxlwefx Adbei

Year of construction: 2005, condition: excellent (used), machine/vehicle number: AAC02761-0502-6018 REV 3, Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor Gbsdpeh N Dwusfx Adbei - Plate gumming device - Destacker - RIP

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Gjdpfxeyl S Ebe Adbsbi

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Gbodpfxeyc R Uij Adboi Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, table width: 300 mm, table length: 400 mm, pressing force: 15 t, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Gsdpjyc R Nmjfx Adbsbi Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Universally applicable due to double adjustable punching units For corner angles with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm Gsdpfsyqxbgex Adbebi Infinitely height-adjustable sensors, punching blades, and back gauge inserts Sensors and punching units are fitted with scales Retractable back gauge for easy profile insertion, self-adjusting when advancing against the profile Hydraulic back gauge locking Pneumatic pressing process via a lever system ensures synchronized punching Max. back gauge height: 120 mm Profile heights up to 190 mm under pressure pad Punching height up to 150 mm Profile widths up to 75 mm, plus flanges up to 60 mm Minimum internal frame dimension: 175 mm 2 pneumatic hold-down cylinders for clamping profiles 2 eccentric cams for frame positioning 2 swiveling profile support arms Operation via 2 foot valves

Condition: used, System: Used chamber filter press Type: Aquachem EC 470 AK25 Application: Sludge dewatering, sludge treatment Year of manufacture: 2005 Filter plate size: 470x470 mm Number of plates: approx. 20 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available, to be matched to the medium Filter area: approx. 12 m² Press volume: approx. 66 dm³ Filter pressure: approx. 15 bar Discharge: closed Pump technology: optional Filter cloths: optional Drip tray: yes Godpfxowqyfuj Adbsbi Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, Year of construction: 2010, Overview The SE 68 B compressor was manufactured by the Belgian company Ateliers François S.A. in 2010. It was used by a big european contract bottler before it was dismantled. It is now located in our warehouse in Germany. Technical data Free air delivery: 2500 m³/h  (43,3 m³/min) Operating pressure: 40 bar Speed rpm: 498 Power: 450 kW Installation type: Mounted on skid with anti-vibration mounts Scope of Delivery  1 × High-pressure compressor 40 bar | Ateliers François  1 × Refrigeration dryer 1 × Electrical control cabinet (CE) Gbedpfjxrcmzex Adbei

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press – versatile use as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press, designed as a double-column press (H-frame construction). Inspection of the press is possible at the warehouse in Ennepetal. This is a 2.5-year-old, unused press with zero operating hours, being sold with full warranty. Technical details: - Robust machine frame - Capacity: 30 tons at 300 bar - Pump ASC: 28.5 liters/min. - Motor: 11 kW – 15 hp - Oil tank: 600 × 450 × 500 mm – approx. 100 liters - Cylinder piston: Ø 110 mm - Cylinder bore: Ø 70 mm - Stroke: 500 mm - Speed, forward: 45 mm/s - Return: 55 mm/s - Guide rods: Ø 50 mm - Table plate: 800 × 550 mm – with T-slots - Ram plate: 700 × 500 mm – with T-slots - Total weight: 2,000 kg - BoschRexroth valves - Control cabinet technology from renowned manufacturers - Press table size: 700 × 500 × 70 mm - Table height: 800 mm, measured from shop floor - Cylinder dimensions / piston rod: 110 / 75 mm - Ram size: 700 × 500 × 80 mm - Emergency stop switch - Rear protective enclosure made from painted mesh - Press area lighting - Rear and sides fully enclosed - 500 mm high light curtain with 14 mm resolution (finger protection) - Maximum distance between table and ram: 500 mm - Cylinder travel: 500 mm - Front open width: 820 mm - Pressing force adjustable by rotary knob from 5 to 30 T - Travel speed: downwards 50 mm/sec, upwards 40 mm/sec Gedpfx Aou U Ey Iodbjbi - Total weight approx. 2,000 kg - Finish in RAL 7035 (light grey) and RAL 2009 (orange) - Assembly, commissioning, and operator training available for an additional charge - CE declaration and German-language documentation - Ram plate guided by two pillars - Resettable piece counter - Position limit via cam switch - Adjustable two-hand control with 3 m cable - Safety inspection with certificate from an authorized specialist company - The right side features movable sensors for stroke limitation. This allows a specific stroke, e.g., 300 mm, to be set. The press will then automatically move to the preset point at the push of a button. - The ram plate is guided by two columns. - The rear of the press is enclosed, but fitted with air outlets. - The table features an ejection chute. - Light barrier with anti-reach-under protection. - Mountable anti-reach-over guard. - Optional: 2 heating plates, 500 × 500 mm heating surface each, total size 550 × 550 mm, with controller, up to 200°C, incl. 20 mm thick insulated plate, with timer - Optional: Installation and training Delivery times: Currently, a lead time of approximately 6 weeks is to be expected (without heating plates). Heating plates delivery time approx. 8 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Zylinder stroke 200mm Travel speed 110mm/sec. Godpfeirnaqsx Adbjbi Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MP2506991, Hydraulic Clinch Press Miller MP645E, optional with feeding bowl for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: • Press force 2-57KN (6 ton) • Throath depth 450mm • Zylinder stroke 200mm • Travel speed 120mm/sec. • Cycle time 3sec. 1200/hour • Size H 2200mm x W 800mm x D 960mm • Weight ca. 680 Kg • Electrical connection 400V, 2.2 KW The offered Miller Press is a demonstration machine from April 2022. It has been used for the installation of samples into customer sheets. In October the machine was exhibited on the Blech Expo in Hannover. Optional the machine can be equipped with an automatic vibration conveyor and automatic feeding tool. Gsdpjirm R Esfx Adbjbi Thanks to the efficient hydraulic system, the high pressing force of 57KN and the repeatability of +/-1%, the machine can be used for most applications in a sheet metal processing company.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, total length: 3,400 mm, total width: 1,240 mm, total height: 1,600 mm, type of input current: three-phase, input current: 400 A, construction width: 1,240 mm, input frequency: 50 Hz, The EKW 2500 is a crate washing machine with a capacity of 214 crates per hour (based on the specified dimensions) with the following dimensions: 600 x 400 mm (L x W). Maximum height: 350 mm. The crate washer from Elpress removes all contaminants from the crate in a single wash cycle, including proteins, blood residues, fats, sticker and glue residues, as well as dried-on dirt. It also removes impurities that your employees may not be able to detect with the naked eye. The crate washer does not have its own heating system and must be heated via your own boiler. Godpfx Adeyhb E Nebsbi The crate washing machine is located in Nijmegen, Netherlands. The machine has only been lightly used and has not been in operation for the past 10 years.

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. Gedjycvkvjpfx Adbebi The entire package is available for one fixed package price. No individual sales are offered. If you have any questions or require additional availability, please contact us.

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Gbjdoyq Nqrspfx Adbsi Pressing force: 40 t

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Gbjdpfxoyq Ngte Adbsi Pressing force: 40 t

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm Godpfx Adotxkprobebi -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon imagePRESS C8000VP colour production system. Item for sale: 1 x Canon imagePRESS C8000VP with the following equipment: Includes Fiery Server B4100 Includes Paper Deck D1 Includes Staple Finisher AN1 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 7,320,386 pages Colour: approx. 6,501,284 pages Black: approx. 819,102 pages Condition: This offer is for a used device, which may show signs of wear and tear. The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Gjdpsx S Dzisfx Adbebi A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon imagePRESS V1000 colour production system. Item for sale: 1 x Canon imagePRESS V1000 with the following equipment: Includes Prisma Controller Includes Paperdeck E1 Includes Booklet Finisher AF1 Includes Stacker Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,132,844 pages Colour: Approx. 1,478,316 pages Black: Approx. 654,528 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Gbjdpjx Sdzvofx Adboi Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2015, condition: ready for operation (used), Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible. Gbsdpfx Aow S Tx Aedbsi

Condition: good (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 8138, type of input current: three-phase, input voltage: 400 V, ❇️ Pressta Eisele AKF – Notching Machine | Excellent Condition | Fully Functional | UVV Safety Inspected For sale is a robust Pressta Eisele AKF notching machine for metal and window fabrication. The machine is in overall excellent, well-maintained, and fully functional condition and was in operation until recently. A valid UVV/safety inspection certificate is available (see sticker/photos). ⚠️ Important Note: On this machine, the pneumatic hoses show signs of material fatigue due to age. ➡️ Recommendation: Replace pneumatic hoses before commissioning (moderate effort required). On-site inspection and functional testing possible at any time. ⸻ ❇️ Machine Details • Manufacturer: Pressta Eisele • Model: AKF • Machine No.: 8138 • Year of manufacture: 1989 • Made in W.-Germany • Application: Notching of profiles in metal and window construction ⸻ ❇️ Features & Equipment • Heavy, low-vibration machine body • Powerful motor • Pneumatic feed and clamping functions • Sturdy work table with clamping options • Safety guards included • Foot pedal operation • Maintenance-friendly design ⸻ ❇️ Condition • Mechanics and electrics: fully functional • Well-maintained overall condition • Note: Pneumatic hoses require replacement due to age (see above) ⸻ ❇️ Dimensions • External dimensions (approx.): H 137 cm × W 99 cm × D 97 cm ⸻ Gbjdpsx Rpfqsfx Adboi ❇️ Terms • Sale on behalf of customer • Invoice with VAT possible • Location: 72229 Rohrdorf • Loading with indoor crane possible on site • Delivery available upon covering costs ⸻ ❇️ Price • Net price: €1,200 + 19% VAT ⸻ If you are interested, please get in touch – viewing and test run available by appointment. ⸻ ⚠️ I also offer additional machines and accessories for window, metal, and workshop operations in my other listings. ‼️ Please check out my other offers – it's worth your while!

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. Gedpedx R Tfefx Adbsbi - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAEFlange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm -Dimensions: 1180/65/65 mm -Weight: 8.1 kg Godpfx Ajd Nn Idsdbobi

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: AR5xxxx, pressing force: 28 t, total width: 2,015 mm, total length: 4,400 mm, total height: 2,500 mm, overall weight: 3,000 kg, filling opening length: 1,360 mm, filling opening width: 1,660 mm, power: 5.5 kW (7.48 HP), new hydraulic compactor container with leak protection, suitable for compacting residual waste containing moisture Gbedpfx Adeydlfxebei