Used Easy Doser De Ruiter for sale (25,260)

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface Fsdpfozkanaox Aggegg - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Fgodpfx Agozuzt Eegjg Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Jöni Easy 250 lit cooking vessel year of construction 2014. Electric tillable built in steam generator. Fully driven by electrical power. Fgjdpjydpgaofx Aggeg

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. Fjdpfx Agey T Iyfjgjgg - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height Fgedpfx Asykuhpeggog F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left Fgedjzv Tg Tepfx Aggog - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL Fsdpfjykubiex Aggjgg 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2017, Operating direction: right-left Fgedpfx Agjzcmdaegeg Machine is open at the top 4 brushes Washing height: 1600 mm Working height: 850 mm Depth: 1500 mm Height: 2530 mm Overall width: 6220 mm Weight: approx. 800 kg Condition: very good, second-hand

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. Fgsdpfjx Rdn Tex Aggjg The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Fsdpfx Agswmxh Tjgsgg

Condition: used, functionality: fully functional, machine/vehicle number: Línea completa etiquetas, COMPLETE DIGITAL LABEL PRINTING AND FINISHING LINE The line includes: Fodpfxsy Uddve Aggsgg • BizPress 13R High-resolution LED toner CMYK digital label printer, ideal for short to medium runs and variable data printing. • SMAG E-CUT S330 Professional label finishing and converting system with lamination, semi-rotary die-cutting, slitting, and rewinding. • LabelCut R20s (ROTUTECH) Inspection, cutting, and finishing system for professional label production. Complete line ready for professional adhesive label production. Ideal for: - label manufacturers - printing companies - industrial production - short to medium runs - variable data and personalization The machines are in very good working condition and can be seen in operation. Location: Spain For more information, videos, or additional photographs, please contact us.

Year of construction: 2008, condition: refurbished (used), JÖNI EASY 30 & 50 LIT ID.NO. 1160 2x cooking pots Jöni model easy 30 & 60 liter year mod 2008 electric tip easy to use and repair when needed. Fgodpfxsf T R Ake Aggsg

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2014, color: blue, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air suspension - Central lubrication system = Further information = General information Usable material: Concrete Axle configuration Rear axle 1: Steered Weights Unladen weight: 8,620 kg Functional Body brand: DE BUF ST2 High-pressure pump: Yes Water installation: Yes Water tank: 600 l Hoses: Yes Condition Technical condition: very good Visual condition: very good DAF CF 510 6X4 tractor unit with 2-axle semi-trailer and DE BUF 12 m3 concrete mixer EURO 6 L PACKAGE 510 HP DRIVE 6X4 Fedpfsv Um I Eex Aggogg AIR SUSPENSION WHEELBASE 320 CM CF SLEEPING CAB WITH AIR CONDITIONING AND REFRIGERATOR MANUAL TRANSMISSION ENGINE BRAKE 252923 KM DE BUF 2-AXLE TRAILER WITH 12 M3 CONCRETE MIXER 2-AXLE SAFE AXLES LAST AXLE STEERING DRUM VOLUME 12 M3 2X WATER TANKS CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW OUR INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: like new (used), functionality: fully functional, machine/vehicle number: EFR4AOOS, - Brand: Graco - Reference: EFR4AOOS - UPC Code: 755652866732 - General Industry - Dosing, mixing, measuring, and electronic control system designed for the precise application of single or two-component materials, SEALANTS AND ADHESIVES - Applications: Beads, encapsulation - Maximum flow rate: 3.4 l/min - Maximum working pressure: 241 bar - 80+80 cc stainless steel bases - Pressure ratio: 1:1 - Maximum fluid temperature: 50°C Fedpjxv Dcrjfx Aggogg - Fully serviced second-hand product - 1-year warranty - Shipping or in-store pickup available - 21% VAT NOT included - VAT INCLUDED. VAT refund can be requested if the company is registered in VIES or has a TAX ID - Customs duties and import charges at buyer’s expense (Incoterm: DAP)

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Fgsdpjzumvxsfx Aggsg Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes-Benz Arocs 5 3546 8x4 EURO6 with Schwing concrete pump S 43 SX III 5-section boom ???including Easy-Flex outrigger system??? First registration: unregistered Mileage: 500 km Color: Arctic White Technical Data * Power: 335 kW * Horsepower: 455 hp * Tire size, front and rear: 315/80R22.5 * Gross vehicle weight: 35,000 kg * Emission class: Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-plate clutch * M cab Classic-Space, 2.30m, tunnel 320mm * Comfortable cab suspension * Front axle: 7.5t, straight version * Rear axle: 13.4t, bevel gear 233, planetary gear * Transmission oil cooler * Fuel tank: 290L aluminum + 25L AdBlue * Disc brakes, front and rear * Sun visor * Air conditioning * ABS + ASR * Driver's comfort air-suspension seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit, interactive with navigation and Bluetooth * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for breathalyzer with immobilizer * Rear view camera Superstructure Equipment * Schwing S 43 SX III 5-section concrete pump, 43m * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from turntable: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide valve system: B-Rock * Electric vibrator system on hopper grate * Slewing range: 2 x 365° * Outrigger system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. volume: 636 l/min. * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump Fgjdoi Tkbdspfx Aggog * Remote control: Schwing Control 30 * Oil cooler * MPS control system Non-binding offer ex works Cologne. Subject to prior sale and errors. Sale only to commercial customers.

Condition: excellent (used), Year of construction: 2025, Demonstration machine Fgjdpfoydf Duox Aggeg Strapping machine, Easy Strapper model 12mm strap Frame size 850x600

Condition: excellent (used), power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,250 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,370 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, trailer coupling, - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rear view camera - Sun visor - Power take-off (PTO) Technical information Number of cylinders: 6 Engine displacement: 10,518 cc Axle configuration Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 15,975 kg Payload: 12,025 kg GVW: 28,000 kg Functional Crane: PALFINGER-EPSILON Q 170 EASYFOLD, behind the cab Body manufacturer: KIPPER with flaps and rear doors Maintenance, history and condition APK (technical inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Identification License plate: 25-BLZ-3 MAN TGS 26.360 6x4H-4 BL TIPPER + PALFINGER EPSILON Q170 EASYFOLD + BAKKER GRAB Very nice and fully equipped MAN TGS 26.360 6x4H-4 BL with tipper body and Palfinger Epsilon Q170 EasyFold loading crane mounted behind the cab, including Bakker grab. An extremely versatile and robust combination, ideally suited for earthmoving, road construction, recycling, gardening and landscaping, municipal work, as well as the transport and handling of various materials. The vehicle comes from a single owner, is in very good condition and has only 190,068 km on the odometer. VEHICLE DATA * Manufacturer: MAN * Type: TGS 26.360 6x4H-4 BL * Axle configuration: 6x4H-4 * License plate: 25-BLZ-3 * First registration: 20.02.2019 * Mileage: 190,068 km * Engine power: 265 kW / 361 hp * Displacement: 10,518 cm³ * Fuel: Diesel * Emission standard: Euro 6 * Weight variant: 28,000 kg * Automatic transmission * Day cab * Air conditioning * Multimedia/audio system * DIN mounting plate on the front of the vehicle * Rotating beacons on the cab * Stainless steel toolboxes * From a single owner Fgjdpezzn Hfsfx Aggeg * Dutch vehicle * Valid technical inspection / APK until 02/2027 TIPPER BODY The vehicle is equipped with a robust tipper body for professional and intensive use. Equipment includes: * Hydraulic tipping function * Aluminum cover flaps * Rear doors * Hydraulically operated side panel * Robust and professional construction * Ideal for bulk goods, sand, earth, gravel, construction debris, green waste and other materials The hydraulic side panel enables quick and efficient loading and unloading, making this combination particularly versatile. PALFINGER EPSILON LOADING CRANE Located directly behind the cab is a: PALFINGER EPSILON Q170 EASYFOLD The Epsilon Q170 is a robust and powerful loading crane, designed for intensive professional loading and handling operations. The crane is equipped with: * Palfinger Epsilon Q170 * EasyFold system * Mounting directly behind the cab * Professional hydraulic system...

Condition: used, Year of construction: 2018, machine/vehicle number: M221, Used Filling Monoblock Alfatek Easy Compact 2018Used Filling Monoblock Alfatek Easy Compact 2018MONOBLOCK Mod. ROBOT COMPACT 7/1Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottles Height 174mm — diameter 70mmComposition:• Elvira LP Series filler with 7 filling valves • Single-head crown capper Mod. “Eagle/C”Max. production: 500/1000 bph with 330 cc bottles and product without foam. Production may vary according to the type of product to be bottled.Power supply: 380V three-phase * N — 50hz • Electrical panel position: Right • Control panel nameplate language: Italian Worktop: 1000 + -50 • Bottle entry and exit: on the rightBottle size:• Height: from 174 to 310 rams. Diameter: 58 to 110mm. • Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mm Bottle neck height: H. level + 30 minThe Used Filling Monoblock Alfatek Easy Compact can only be unloaded with a forklift of adequate capacity and forks of no less than 1,400 mm in length. Complete with safety guards in accordance with CE standards.ACCESSORIES INCLUDED IN THE PRICE:CE-rated safety guards; Equipment for n. 1 cylindrical bottle format; Towing head. return head, bottle arrival table. Fgodevgukrspfx Aggog

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). Fgodpjxtfa Hofx Aggsg ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: ready for operation (used), Year of construction: 2004, A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible. Fodpfoznx Hvox Aggjgg

Condition: used, functionality: fully functional, empty load weight: 5,600 kg, maximum load weight: 20,400 kg, overall weight: 26,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, total length: 10,040 mm, total width: 2,550 mm, suspension: air, tire condition: 70 %, De Angelis 3R2 Trailer Fgsdpfxozxy U As Aggeg 8m low-bed trailer with ramps and sideboards 3 axles air suspension GVWR 26,000 kg - payload 20,400 kg Total length of trailer with drawbar: 10.04 m (drawbar: 1.80 m) Tires: 70% tread (245/70 R17.5) Width: 2.55 m All specifications are subject to change without notice.

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Fodpfx Agoyv Uunjgsgg

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° Fedpfx Aezcdwdoggsgg • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: new, functionality: fully functional, power: 55.4 kW (75.32 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 120 l, color: red, overall weight: 7,145 kg, empty load weight: 7,145 kg, maximum load weight: 3,300 kg, lifting power: 3,300 kg/m, lifting height: 9,070 mm, tire size: 400/80-24, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2023, operating hours: 41 h, Equipment: additional headlights, adjustable boom, cabin, pallet forks, soot filter, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 41 h - delivery / test hours only Maximum lifting capacity: 3,300 kg Maximum lifting height: 9.07 m Maximum reach: 6.35 m Maximum reach at full load: 1.65 m Drive: Diesel Transmission: Torque converter / automatic, 4 forward / 4 reverse Four-wheel drive: Yes Steering modes: Front-wheel / 4-wheel / crab steering Stabilizers: No Cabin: Enclosed cabin Heated cabin: Yes Air conditioning: No Fodpfx Aey Tm Izoggogg Fork length: 1,200 mm Tyres: Pneumatic rough-terrain tyres - Alliance 400/80-24 Engine manufacturer: Deutz TD 3.6 L Emission class: Stage V / Tier IV Final Weight: 7,145 kg CE certification: Yes === HIGHLIGHTS === New / unused Manitou MT 933 EASY with only delivery and test hours. 3.3 t maximum lifting capacity and 9.07 m maximum lifting height. 6.35 m maximum reach for versatile handling applications. Closed cab with heating. Deutz Stage V diesel engine with torque converter transmission. 4x4 drive and multiple steering modes for rough-terrain operation. Pallet forks included. CE certified and ready for immediate use. === CONDITION === New / unused condition with only delivery and test hours. Fully checked, maintained and tested by certified professionals. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). The Manitou MT 933 EASY is a reliable fixed telehandler designed for construction, rental and industrial applications. With a 3,300 kg lifting capacity, a maximum lifting height of 9.07 m and a maximum reach of 6.35 m, this machine offers strong performance in a robust and easy-to-operate package. This 2023 unit is in new / unused condition with only 41 delivery and test hours. It is equipped with a Deutz Stage V diesel engine, torque converter transmission, 4x4 drive, multiple steering modes and an enclosed cab without air conditioning. A very clean machine, CE certified and ready for immediate operation. === DELIVERY === Crane loading possible on request for smooth transport handling. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the logistics team of Collé Rental & Sales.