Used Eccentric Press 200 Tons for sale (58,797)

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm Kjdpfovut E Dsx Ah Usfa ram adjustment 70 mm power requirement 2,0 kW weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation can be inspected in running condition in our warehouse

Condition: good (used), Hydraulic press, workshop press, two-column press, oil hydraulic press Kfedpsxwucxefx Ah Uja -Hydraulic press: pressing force 102 t -Stroke: 220 mm -Operation: Hand lever -Hydraulic unit: VEM 5.5 kW / 325 bar -Clamping table: 1050 x 670 mm -Insertion height: 295 to 1130 mm, lockable in 8 stages via cable pull -Dimensions: 1820/950/H2580 mm -Weight: 2500 kg

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation Kedpfxexrb Nbj Ah Uefa - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, General Data Machine weight 16600 kg Kedpfox D Ni Tox Ah Usfa Main Drive Pressing force 2000 kN This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Application Types Bending

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Ksdjxqn Unopfx Ah Uofa Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: good (used), pressing force: 25 t, – Capacity 25 tons – Table 360 x 350 mm – Foot control – 380V Ksdpfxjxc N Tcs Ah Ujfa

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40 Kfodjhfwqzopfx Ah Uea

Condition: used, Year of construction: 1995, pressure 100 t throat 300 mm stroke 10 - 100 mm no. of strokes 100 Hub/min ram adjustment 60 mm daylight, max. stroke above - ram adjustment above 490 mm table surface area 900 x 600 mm Kjdpfx Asv Rgwrsh Uofa hole in the table 300 x 200 mm T-slots 4 T-slot - width 22 mm ram surface 440 x 235 mm tool shank hole (depth x diameter) 85 x 50 mm total power requirement 5,5 kW weight of the machine ca. 5,8 t dimensions of the machine ca. BxTxH 2,2 x 1,65 x 2,6 m - Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm Kfedexu Nw Sjpfx Ah Usa weight of the machine ca. 4,3 t

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN Ksdpox D Ruwofx Ah Uofa This LAUFFER DK 200 was manufactured in 2007. A robust hydraulic stamping press with a pressing force of 2000 kN and a retraction force of 243 kN. It features a maximum stroke of 320 mm and operates at a work pressure of 249 bar. Weighing 15,200 kg, consider the opportunity to buy this LAUFFER DK 200 hydraulic stamping press. Contact us for further details regarding this machine. Application Types Stamping

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, pressing force: 200 t, working range: 4,100 mm, Used Edwards Pearson Pr10 8 axis CNC pressbrake Bystronic EDWARDS PEARSON PR 10 ELITE MODEL CNC PRESS BRAKE Specifications: · 8 axis machine · 6 axis back gauge · Year 1999 · 200 Ton Bending Force Kodpfx Aewcf Eqoh Uefa · 4,100mm Bending Length · Cybelec CNC Control Complete with a large amount of upper and lower tooling

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm Kfodpfeu Nfhdsx Ah Uja dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Kjdpfxohtaaqe Ah Usfa Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), Machine data: Make / Model: Ter Hart Eccentric Press THEP25 Machine number: 99302 Press capacity: 250 kN Number of strokes: 140 strokes/minute Adjustable stroke: 6 – 60 mm Kfodpoxw Nm Eefx Ah Uoa Adjustable ram: 35 mm Cutting capacity (at 400 N/mm²): 625 mm² Year of manufacture: 1999 Motor power: 1.5 kW Supply voltage: 3 x 400V / N / PE Operating air pressure: min. 0.55 MPa – max. 0.65 MPa Weight: 700 kg Origin: Riva B.V., Epe – Netherlands Included: CE marking Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Kfjdpox D Tngsfx Ah Uja Without the column stand mounted in the pictures.

Year of construction: 1992, condition: ready for operation (used), An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement. Ksdex Aum Ijpfx Ah Uefa

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 100/2/173/02, throat depth: 330 mm, table length: 950 mm, stroke adjustment: 10 mm, total width: 660 mm, pressing force: 100 t, stroke length: 130 mm, punching force: 100 t, Used 100ton mechanical power press for sale complete with sheet metal feed system Video at the bottom of the listing MODEL 100 CNR 4 SERIAL N° 100/2/173/02 NOMINAL FORCE (Max stroke) 1000 [ KN] MACHINE WEIGHT 7000 [ daN] NOMINAL SPEED 65 [C/min ] VARIABLE SPEED MIN/MAX 30/90 [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 22 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 ( bar ] MAXIMUM STOPPING TIME 0,195 [s] SAFETY DISTANCE 312 [ mm] FLYWHEEL ENERGY 8493 [KJ ] STROKE LENGTH MIN/MAX 10 / 130 (mm ) RAM ADJUSTMENT 100 [mm ] SHUT HEIGHT S.D.A.U. 370 [ mm ] MAXIMUM EJECTOR STROKE 55 [ mm ) TABLE SIZE 68 / 660 / 950 [mm ) RAM SIZE 450 / 540 ( mm) Kodpfsxqn Twjx Ah Usfa TOOL SPIGOT DIA 60 THROAT DEPTH 330 [mm / MAX TOOL SIZE 450 / 540 ( mm] MAX TOP TOOL WEIGHT 180 ( daN]

Condition: used, Technical details: Pressure: 160 t Kjdpfx Aju N Dfheh Usfa slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition. Kedswva I Hopfx Ah Usfa

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm Kedpfxefn Aqno Ah Uofa ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Ksdpfx Ajx Aunfoh Ujfa

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 200x3100, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, number of support arms: 4, pressing force: 200 t, working range: 3,100 mm, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Model: XPERT2000x3100 Manufactured: 2008 Ksdpfx Asvua Ifeh Ujfa Specification: Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm Kfjdpfxju N A U Is Ah Uoa throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm Kodpfx Aou Nfg Hsh Uofa passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. * Kjdsu Nfhqjpfx Ah Ujfa