Used High Speed Press for sale (54,167)

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm Dsdjz E Ikijpfx Aizjwd • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Djdpfx Ao Afwtgjizewd Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, REF: MM6481 2003 Weber CCS-602 high-speed slicer for the industrial slicing of products such as meats, sausage and cheese. Sold for spares or repairs. Dsdpfx Aszvx Dkoizewd Technical specification: ✅ Manufacturer - Weber Maschinenbau GmbH ✅ Model - CCS-602 ✅ Serial number - 371 ✅ Year of manufacture - 2003 ✅ Knife - 460mm diameter circular knife ✅ Speed / output - up to 600 slices per minute ✅ Maximum product length - 1,200mm ✅ Cutting thickness - 0.1mm to 50mm (depending on product) ✅ Electrical requirements - 400V / 50Hz / 3 phase ✅ Power - 10 kW ✅ Air requirements - 10 bar ✅ Overall dimensions - 2200mm long x 1250mm wide x 2150mm high Condition: Needs repair for an electrical fault. When first powered up, the screen lit up but would not move from the home page. When it was next powered up, there was a noise and some smoke from the electrical panel. It has not been powered up since.

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dwodpfx Aio Ahg I Eozod Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Dsdpszlqkbofx Aizewd Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm Dsdpfx Ashgiyieizewd safety distance: 4mm Accessories: decoiler GM1

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN Djdpfx Ajnl Snjizswd bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: refurbished (used), Year of construction: 2027, pressing force: 50 t, Machine available to order (made-to-order): Fully reconditioned B500-950 high-speed automatic stamping press Table length 950 mm (optionally 1150 mm or 1250 mm available), Adjustable stroke 16 to 51 mm, Dwodszlqk Uopfx Aizjd A servo feed can be installed as an alternative to the Bruderer BBV 202/120 roll feed. Contact us for detailed quotations.

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Dodpfx Ashgiwnsizswd Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling Dwjdpezh Nnwsfx Aizjd BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: refurbished (used), Year of construction: 2027, pressing force: 25 t, Machine available to order (built-to-order): Fully refurbished B250-740 high-speed automatic stamping press Table length 740 mm (optionally 850 mm), Dwedpfx Aiszlqkzjzjd Adjustable stroke 13 to 38 mm, A servo feed can be installed as an alternative to the Bruderer BBV 190/85 roll feed. Contact us for detailed quotations.

Year of construction: 1983, condition: used, Force: 75 tons Table: 630x620mm Ram: 500x450mm Ram adjustment: 80mm Daylight: 370mm Windows: 300mm Stroke: 08-100mm Strokes/Minute: 07-160 Requested power: 11KW Weight: 7 tons Height: 3050mm SIRI electronic servo roll feeder Dwodpfx Ajctl Dtoized Hydraulic overload protection Hydraulic Ortlinghaus clutch

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke Dwodpfjyz Dtdsx Aizjd - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Dodpfx Aio Ahhdpezewd Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: Elite P27965, This Kliklok Certiwrap Elite was bought to wrap snack pots at high speed. It is in nearly new condition as it has not been used a great deal. Dwsdpfx Aioz E N Hrjzjd

Condition: used, Year of construction: 1976, Force: 160 tons Windows: 600mm Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Dwodpfecna Hfsx Aizsd Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Siemens control, ALBA roll feeder material 400x3mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Dwjdpfs Advdnex Aizsd Machine type: Rapid radial drilling machine Manufacturer: Collet MACHINE DETAILS Length: 4,000 mm Width: 2,000 mm Height: 3,000 mm Weight: 5,000 kg

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Dsdjvkfmrspfx Aizjwd Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: refurbished (used), Year of construction: 2027, pressing force: 60 t, Machine made to order: Dwedpfx Aiozlqlfszod High speed press BSTA 60 Retrofit and general overhaul. Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Please contact us for detailed offers.

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm Dsdpfx Aiecxxpcozjwd total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, Year of construction: 1991, functionality: unexamined, pressing force: 20 t, stroke length: 51 mm, overall weight: 3,600 kg, BSTA 200E press, year of mfg. 1991, in 2000 overhauled, with BBV 101/75 roll feed on right-hand side. Adj. stroke 8 to 51 mm Nominal capacity 20 tons Max. tool loading width 420 mm Dwedjw S Hagepfx Aizsd Available immediately ex-stock. Please contact us for more information!

Condition: excellent (used), Year of construction: 2017, operating hours: 37,280 h, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 2 Nm, controller manufacturer: Fanuc, controller model: 31i- B5, spindle speed (max.): 54,000 rpm, operating hours of spindle: 11,360 h, spindle nose: HSK-E 32, number of slots in tool magazine: 40, tool length: 200 mm, tool weight: 1,200 g, 5-Axis Mill-Turn Center We offer you: Manufacturer: Chiron Model: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical Specifications: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar capacity: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swivel unit: Swivel angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 pos. Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37.280 h Spindle hours: approx. 11.360 h Please refer to the attached PDF for technical specifications and accessories. Dwedpfxj Agr Nts Aized Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell items prior to order confirmation!

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min Dwedpfxordi Dlo Aizsd ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Dwjdpfx Aieflrhzszjd Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Year of construction: 1993, condition: used, pressure 63 t stroke 10-80 mm no. of strokes 65-400 Hub/min ram - range of adjustment 80 mm table surface area 1030x550 mm ram surface 920x450 mm Dsdolp U E Rspfx Aizjwd hole in the table 700x200 mm 420 mm weight of the machine ca. 10 t