Used Manual Screw Press for sale (27,820)

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Hsdpfx Amozdat Rs Ter

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Hjdpfxezpxhie Am Tor Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm Hsdpey S Syaefx Am Tjr  Table area: 410 x 280 mm  Weight: 335 kg Condition: good, little use

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg Hjdpfsigwdwex Am Tor

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Hjdpev Td Ersfx Am Ter

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Hjdszcqmlspfx Am Tor Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), very robust spindle press Pressing area: 40 x 50 cm Working height: approx. 50 cm Hodpfxozmytue Am Tsr Made of cast iron 80 kg

Condition: excellent (used), Very nice, robust spindle press. Pressing area: 40 x 50 cm. Working height: approx. 50 cm. Weight: 60 kg. Hodpfjzmyr Rsx Am Tjr

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced!!!!! Technical data on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust manual spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the common technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the size/frame width; the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle rotated upwards) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Construction: Solid cast iron frame in C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel when the spindle is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool attachment. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolted mounting to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the spindle position). Width (stand): approx. 500 – 600 mm. Hedjwxyn Ejpfx Am Tsr Depth (foot): approx. 800 – 1,000 mm.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Hsdozgtz Sepfx Am Ter Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops.

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: Hedpfxeyzzh Eo Am Ter ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] - Spindle height : 400 [mm] - Slide bore diameter : ø 10H7 [mm] - Angle : 95 [°] - Max. tool weight : 15/30 [N] - Table dimension : 110 x 80 [mm] Hjdpfx Ameuhallo Tor

Condition: used, TECHNICAL DETAILS Hjdpfjuhalfox Am Tjr - As per photos

Condition: used, TECHNICAL DETAILS Hjdpjuhaiqofx Am Tor Same as on photos

Condition: used, TECHNICAL DETAILS Same as on photos Hodsuhaiwopfx Am Tor

Condition: used, TECHNICAL DETAILS Same as on photos Hedouhaidepfx Am Tor

Condition: used, TECHNICAL DETAILS Hsdpfsuhaikox Am Tjr Same as on photos

Condition: ready for operation (used), Four-column press SP60/670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Distance between columns: 670 mm - Distance between columns / laterally: 400 mm Hedpfx Amezcxhwe Tor - Table size: 900 x 750 mm - Vertical clearance: 520 mm - 6 x T-slots in the upper platen - 6 x T-slots in the table Dimensions: L x W x H 2 x 1.5 x 2 meters / Weight 3000 kg Subject to errors and omissions.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Hsdpjxa Hy Uofx Am Tjr Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Hodpfxoquqpae Am Tor

Condition: good (used), Year of construction: 1963, Stroke = 250 mm Hedpfx Aoy H Ic Hom Tsr On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Year of construction: 2006, condition: excellent (used), Punching capacity in sheet metal with a tensile strength of 37 kg up to: 2 and 3 mm Hodpfx Aod D Ryfom Tjr using various punching tools.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Hedpfxodzqaaj Am Tor Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) - Spindle diameter 60mm - Spindle pitch per revolution 32mm - Number of guide columns 2 - Clear width between columns 410mm - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm Hsdpfx Aevnbrxjm Ter

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. Hedpjpbwdlsfx Am Ter The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!