Used Edalco Tapping for sale (872)

Condition: like new (used), Year of construction: 2018, operating hours: 502 h, functionality: fully functional, machine/vehicle number: 1154161, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, rapid traverse Z-axis: 61 m/min, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, feed rate X-axis: 31 m/min, feed rate Y-axis: 31 m/min, feed rate Z-axis: 31 m/min, nominal power (apparent): 20 kVA, torque: 46 Nm, controller manufacturer: HAAS, controller model: HAAS NGC (Next Generation Control), workpiece length (max.): 660 mm, workpiece width (max.): 381 mm, workpiece height (max.): 394 mm, workpiece weight (max.): 113 kg, total height: 2,489 mm, total length: 1,626 mm, total width: 2,083 mm, table width: 381 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 2,722 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 502 h, coolant supply: 20 bar, distance table to spindle center: 495 mm, spindle motor power: 11,200 W, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 30 mm, tool length: 127 mm, tool diameter: 76 mm, tool weight: 1,800 g, input voltage: 400 V, type of input current: three-phase, HAAS DT-1 High-Speed Drilling/Tapping Center - Excellent Condition - Only 502 Spindle Hours Exceptionally well-maintained HAAS DT-1 vertical machining center with very low hours. This compact, high-speed machine is ideal for drilling, tapping, and light milling operations in aluminum, steel, and other materials. Full details are available (including all invoices) through a website build for this machine. Ledpjx E Au Uefx Ah Uohr Machine History: - Built: August 2018 - 2018-2021: Demo machine at Landré (official HAAS distributor Netherlands) - October 2021: Purchased by IMBU BV - 2021-2025: Used exclusively for prototyping - never production work - December 2025: Full service by Landré (service report available) Condition: Outstanding condition for its age. Only 502 spindle hours and 1,764 power-on hours. The machine has been carefully maintained and used only for prototype development, resulting in minimal wear. Installed Options: - 15,000 RPM spindle (11.2 kW, BT-30) - Through Spindle Coolant (TSC) 20 bar with 25 micron fine filter - Renishaw Wireless Probing System (WIPS-R) for tool and workpiece measurement - 4th axis interface with wiring (ready for rotary table) - 5th axis interface with wiring - High Speed Machining (HSM) - 80 block look-ahead - Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) - Programmable coolant nozzle (34 positions) - Automatic chip auger Software Options: Macros, Rotation and Scaling, Rigid Tapping, M19 Spindle Orient, VPS Editing, Media Display, Wireless Networking, Compensation Tables, 1GB Max Memory Technical Specifications: - Travel: X=508mm, Y=406mm, Z=394mm - Rapid traverse: 61 m/min (all axes) - Table size: 660 x 381 mm - Table load: 113 kg - Tool changer: 20+1 side-mount - Spindle nose to table: 102-495 mm - Coolant tank: 208 liters - Machine weight: 2,722 kg - Dimensions (L x W x H): 1626 x 2083 x 2489 mm - Power: 400V 3-phase Machine Data (from controller): - Power-on hours: 1,764 - Spindle hours: 502 - Feed cutting time: 337 hours - Tool changes: 13,803 - Programs completed: 3,896 Included: - Complete machine documentation - All original invoices (machine, tooling, accessories) - Landré service report December 2025 - Renishaw wireless probing system (tool probe + workpiece probe) ALSO INCLUDED: Extensive set BT-30 toolholders (list attached), Ceratizit cutting tools, and Lang Quick-Point clamping system (list attached). Total investment approx. €25,000. Location: Netherlands Reason for sale: Company restructuring All documentation available on website. Inspection welcome by appointment.

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Lodpex E Ahzjfx Ah Uehr Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT Lsdpfeh Dpv Rjx Ah Ushr We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), mileage: 830,321 km, power: 265 kW (360.30 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 550 l, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 10,520 mm, total width: 2,530 mm, total height: 3,800 mm, loading space length: 6,900 mm, Year of construction: 2011, Equipment: crane, Crane Tap Length: 12,8 m Number of hydraulic extensions: 4 Number of manual extensions: 1 Number of support legs: 4 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 15 m = More information = General information Cab: one and a half Registration number: BZ-DF-90 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Drivetrain Make of engine: DAF Axle configuration Brakes: disc brakes Front axle: Max. axle load: 9000 kg; Steering; Tyre profile left: 60%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: air suspension Weights Empty weight: 12.900 kg Carrying capacity: 15.100 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Functional Crane: HMF, year of manufacture 1998 Make of bodywork: Renova Extendable superstructure: Yes Lhodjxr Drfopfx Ah Usr Layout Number of beds: 1 Maintenance APK (MOT): tested until 04/2026 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Lhedpfx Asx Nf Tbeh Uer machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Lsdpoxzhcmjfx Ah Ujhr

Year of construction: 1988, condition: used, New: No VAT/margin: VAT qualifying Material: 316 L stainless steel Tank pressure: 50 psi / approx. 3.5 bar Double jacket pressure: 90 psi / approx. 6 bar Temperature: 300°C Heat source: external (not supplied) Diameter: 600 mm / Depth: 600 mm Hinged lid 3 clamp connections diameter 50 mm 1 temperature tap Total opening / closing 8 clips Lhodpfxox Aq D Ae Ah Uor Total draining Year : 1988 Mobile unit : 4 wheels

Condition: new, Cucinesse Evolve Kitchen Showroom display model, unused Evolve Made in Italy The Evolve collection is featured in the "Light On Design" catalog, a curated project celebrating the perfect fusion of artisanal precision and industrial expertise. With its sophisticated design and meticulous attention to detail, the Evolve model creates an inviting and tactilely appealing space where materials take center stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-Beige Type: Kitchen Island Worktop: Trespa Marble Effect Nero Street Worktop Height: 94.5 cm Kitchen Island Length: 362.5 cm Kitchen Island Width: 103.5 cm Lodpjx Eyrwsfx Ah Ujhr Kitchen Island Height: 94.5 cm Washbasin: Reginox Undermount 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178 cm, 320 Liters, Soft-Close Cooktop: Bora Puxu Induction Cooktop with Extractor, 83x50 cm Tap: Not Included Oven: Not Included Tall Cabinets Length: 300 cm Width: 60 cm Height: 220 cm Without Gaggenau steam oven, Gaggenau vacuum drawer, and Faucet Disassembly and removal by buyer Disassembly by our installation team is also possible (€1200) Item location: Utrecht, Netherlands Find more items – new and used – in our shop! International shipping costs on request

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Ledowal Hpspfx Ah Uehr Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW Lsdpfsx H Al Nex Ah Uohr > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Year of construction: 1985, condition: ready for operation (used), This 3-axis Schütte SF 26 was manufactured in 1985. It features a pick-off spindle, bar guide, and electronic tapping control, enhancing its horizontal turning capabilities. If you are looking to get high-quality turning capabilities, consider the Schütte SF 26 machine we have for sale. Contact us for more information. Application Types Turning Ljdpjx D Rfpsfx Ah Uehr

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. Lodpfx Aoibd Aleh Ujhr EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: used, Combined tenon, slot and rebate angle machine Weinig UC 10, for the flexible production of various windows, elements and doors without changing tools. Frame-wise, serially or individual parts production, including tool set Oertli Wood/Alu IV 77 & 67 and Wood IV 77 & 67. · Aggregates: 1. Cross-cut saw: NC controlled, ø 40 mm, 3 kW 2. Tap and slot spindle: clamping length: 640 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3. Profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4. Profile milling unit, horizontal from above, 3 kW, ø 40 mm, clamping length: 40 mm 5. Profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6. Profile milling unit, vertical right, 3 kW, ø 40 mm, clamping length: 160 mm 7. Profile milling unit, horizontal from below, 3 kW, ø 40 mm, clamping length: 125 mm · Studio window setup · CNC controlled length stop · Slat conveyor including conveyor belt for automatic return transport to the operator · NC-axis: feed height adjustment · Milling package · Incl. tool set Oertli Wood/Alu IV 77 & 67 as well as Wood IV 77 & 67. Ljdpfjvmqtcox Ah Uohr

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Lhjdpfx Ahsxxyigs Usr Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Ljdpjtuggcsfx Ah Uehr Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: new, Continuous drilling capacity in St 60: 35 mm Normal drilling capacity: 40 mm Tapping capacity: M 30 spindle: MK 4 feed infinitely variable: 20 - 400 mm/min drilling depth programmable: 175 mm throat depth: 300 mm distance spindle/table: 70 to 830 mm table surface: 550 x 400 mm column diameter: 120 mm total height: 1.980 mm weight: 450 kg Lhodpfjb Nbvgsx Ah Uor motor pole-changing: 1,5 / 3,0 kW spindle speeds stepless range A: 120 - 2.500 rpm Spindle speeds infinitely variable Range B: 60 - 1,200 rpm

Condition: ready for operation (used), Year of construction: 1994, Main Drive Number of axis 5 Lhedox D Sqgjpfx Ah Uor Additional Equipment Tool Magazine: 60 SK40 positions with vertical chain and double gripper / Drilling Capacity in Steel: 25 mm / Tapping Capacity in Steel: M24 / Milling Capacity in Steel (SK 30): 150 cm³/min / Milling Capacity in Steel (SK 40): 180 cm³/min / Milling Capacity in Aluminum: 500 cm³/min Chip Conveyor: Scraper belt / Flushing Gun for Chip Flushing / Coolant/Air Blast Switching: External via M function / Infrared Measuring Probe: Heidenhain TS 649 DMG / 3D quickSET: Toolkit for checking and correction of kinematic accuracy This 5 axis STAMA MC 520 was manufactured in 1994. It features a robust vertical machining centre with a clamping area up to 3000 x 430 mm and a permissible table load of 1600 kp. Equipped with a high-speed spindle capable of 6000 rpm and optional 10000 rpm, it ensures efficient machining. The machine includes a 60-position SK40 tool magazine and a scraper belt chip conveyor. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 Lhodpeibarqefx Ah Uor tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: used, WEINIG UNITEC 10 automatic tapping and slotting machine as a spare part carrier from a UC-Matic window system. * Year of manufacture: 1997 * Sütron BT20 control system * Machine incomplete * Details upon request. Ledew I Db Hjpfx Ah Ujhr

Condition: used, Year of construction: 1995, functionality: fully functional, Morse taper: 4 Drilling capacity: Ø40 mm. Quill travel: 200 mm. Throat/reach: 380 mm. RPM.: 30-1500 (variabel). Table size: 560 x 480 mm. Automatic feed: Ja Motor: 3,1 kW. Year: 1995 Country of origin: Spain. Size (L x W x H): 600 x 1100 x 2100 mm. Lhedpfjx Ebv Iox Ah Ujr Weight: 640 kg. With electro magnetic clutch for automatic feed, automatic tapping unit, variable speed in 3 gear ranges. Digital reaout of RPM, rotating and tilting table, coolant pump in base, vice and misc. drills. All our used machine are tested and serviced before delivery.

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering Lsdpfx Ajv Dxw Rsh Ushr MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: new, The SSB 40 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to finishing operations. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed with an intuitive manual transmission. You can expect exceptional performance for your drilling needs. For more information or to request a quote, consider the SSB 40 F Super VT, a top choice in the Column Drilling Machines category. Lhodpenp Hymofx Ah Ujr

Condition: used, Angular system Weinig Unicontrol 10 (UC 10) for the production of windows, elements and doors. Frame by frame, in series or individual part production with 2 tapping and slotted spindles incl. Oertli tool set * Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tapping and slotting spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80) mm 3. Second tapping and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW * Double part package * Milling package with milling carriage * Automatic turning system * PC control NEXUS * CNC controlled length stop * Studio window facility * Aggregate for edge rounding from below with a crosscut saw * Rung support bar * Incl. suction pipe system * Incl. tool set Oertli * Further technical data and tool drawings on request. Lsdpev Ag Tdsfx Ah Ushr

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG Lhodpfxetugggs Ah Usr turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: new, The SSB 50 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to industrial construction. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed. For those looking for a high-quality Column Drilling Machine, the SSB 50 F Super VT is an excellent choice. Request a quote today to learn more about this exceptional machine! Lodpfenp Hp Ijx Ah Ujhr