Used Eddy Current for sale (6,844)

Year of construction: 2002, condition: used, functionality: limited functionality, Sand processing plant for the production of high-quality sand with a grain size of 0-2 mm. For sale is a complete sand processing plant from the Rheinstetten-Forchheim gravel and sand works of Heidelberg Materials Mineralik DE GmbH. The plant was used for cleaning sand, removing organic contaminants, and producing sand with defined quality characteristics. Key technical data: Throughput capacity up to 200 t/h Processing of sand 0-2 mm Production of controlled sand 0-2 mm Ibsdszx Uytjpfx Am Doc allflux® AFX-F 750 fluidized bed classifier Solid material throughput up to 200 t/h Mixture volume approx. 375 m³/h Machine weight approx. 8 t allflux® AFS-F 500 eddy current classifier Solid material throughput up to 60 t/h Grain size 0-0.25 mm Fine sand recovery with hydrocyclones 3 dewatering screens for fine, medium-fine, and coarse sand Reversible conveyor belts Silo system with 6 buffer silos, each with a capacity of 220 m³ Dosing system with 8 dosing belts and 8 electric discharge gates Scope of supply: allflux® AFX-F 750 fluidized bed classifier Fine sand recovery with hydrocyclones and arch screen allflux® AFS-F 500 eddy current classifier 3 dewatering screens Fine sand recovery for coarse sand Fine sand recovery for medium-fine sand Conveyor technology Silo system Dosing system

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,610 kg, Wagner Magnets – Non-ferrous metal separator / Eddy current separator – Type 0429/1-37/90/8 For sale is a used non-ferrous metal separator (eddy current separator) from the manufacturer Wagner Magnets. The machine was used in our recycling and processing plant and serves to separate non-ferrous metals, such as aluminum, from various material streams. Due to the restructuring and upcoming renovation of our recycling plant, the machine is being offered for sale. Ibjdpfxsz R S D Te Am Doc Technical data: Manufacturer: Wagner Magnets Machine designation: Non-ferrous metal separator Type: 0429/1-37/90/8 Equipment number: 542449 Order number: A 354429 Belt speed: adjustable from 0.5 to 2 m/s Weight of base unit: approx. 1,610 kg Discharge hood included Permissible ambient temperature: -20 °C to +45 °C Control: Type: 0428/1-25 FE Equipment number: 542450 Mains connection: 400 V / 50 Hz Recommended fuse rating: 25 A (slow-blow) Protection class: IP54 Weight: approx. 173 kg Drives: Rotor drive: 4 kW Belt drive: 1.5 kW Frequency converter for rotor and belt drive included Magnetic drum: Type: 0421N-30/85-02 A 1AL 15x20 Equipment number: 542449 Motor power: 0.55 kW Discharge hood: Weight: approx. 260 kg Condition and sale: The machine is in used condition and shows corresponding signs of wear and tear due to operation. An on-site inspection is possible after prior appointment. Technical documentation is available. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Iedpfez Ni S Rox Am Djbc Voltage: 400 V Current consumption: 7.13 Fuse rating: 16 A Main motor power: 3.1 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Shipping packages: 1 piece

Condition: not inspected (used), Current assets and work-in-progress consist of: installed parts, devices, control boxes, chassis, axle supports, cable pulleys, protective bars, retaining plates, base supports, transport units, deflection rollers, splash guards, axles, chains, cables, drum supports, struts, and other similar items. Isdpfx Amsz R Nxhe Djbc

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Ibjdpfx Aeznmgqsm Djc Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: used, mileage: 171,821 km, power: 100 kW (135.96 HP), first registration: 12/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 8, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Refurbished and newly painted MB Vario 814D from government/federal police ownership. Equipped as a bus (group vehicle) MR / high-roof with full air conditioning and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrically operated, wear-free eddy current brake for speed adjustment. We completely refurbished the body in our own workshop and professionally repainted it in two colors. Only the center section of the roof is still original. For such work, we employ a qualified body builder as well as a qualified vehicle painter. In the area of body repair, we are able to manufacture sheet metal in any form and weld it in professionally using a low-distortion welding process at low temperatures. In our special 18-meter long and 6-meter high paint booth, we can also professionally powder-coat such large vehicles at 80°C. This ensures high quality and a vehicle that retains its value, and you will enjoy it for a long time. Ibodpfez Nuhwjx Am Dec We have replaced the windshield and the crank windows in the cab with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Technically, this Vario has been recently serviced and is in good condition, with no pending repairs - it has been consistently maintained according to the service schedule. The last inspection was carried out in 09/2025 at 171,635 km, the last engine oil change in 10/2024 at 169,714 km. Currently, the front brake pads have been replaced, the tires have been renewed (M+S as steering profile), the chassis has been lubricated, and the cartridge of the air dryer has been replaced. The tires on the rear axle (M+S) have a tread depth of 8.0mm. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed Vmax according to registration certificate: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests; furthermore, the left inner seats can be moved inwards on the console by approximately 10cm to provide more room. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional cost of 750 €, we can carry out a technical modification to convert it into a motorhome. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. We will provide the Vario with a new TÜV/AU (technical inspection/emission test) certificate upon delivery - it drives well and the transmission can be shifted precisely. +++Errors, changes, and prior sale are subject to change.

Condition: used, mileage: 147,717 km, power: 100 kW (135.96 HP), first registration: 04/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Configuration as a bus (group transport vehicle) MR / high roof with full climate control and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrical, wear-free eddy current brake for adjusting the speed. Before sale, the windshield will be replaced with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Furthermore, before sale, the bases and deflector shields of the former roof-mounted rotating lights will be removed from the roof. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, before sale, we will dismantle the rear wooden cabinets. This also creates space for a motorhome interior. Technically, this Vario is in good condition and does not require any immediate repairs; it has been consistently maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle registration document: 120 km/h A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests, and the left inner seats can also be moved approximately 10 cm forward on the console to provide more room for movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH) For an additional charge of €750, we can carry out a technical modification to convert the vehicle into a motorhome by removing some seats. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. Ibsdpfx Aozr Ayhem Doc +++ Errors, changes and prior sale are reserved.

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), first registration: 12/2002, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Ibedsyxuv Depfx Am Djc Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Equipped as a bus (group transport vehicle) with a raised roof, full air conditioning, auxiliary heater, ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake for speed adjustment. The body only has minor surface rust on the lower edges of the sills – no holes are present. There is a slight bulge on the rear wheel arch, but this is not relevant for the TÜV (technical inspection). Technically, this Vario is in excellent condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with a real glass one, making it suitable for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Iodpfozmqnpsx Am Dobc Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs – with adjustable backrests and armrests. Furthermore, the left inner seats can be moved forward by approximately 10 cm on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional charge of €750, we can carry out a technical modification to convert it into a camper van by removing some seats. Due to space constraints, a maximum of 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. +++Errors, changes, and prior sale are subject to change.

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Ijdpsz Irhksfx Am Dobc Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: used, mileage: 133,344 km, power: 100 kW (135.96 HP), first registration: 01/2004, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency / Federal Police. Configured as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for speed adjustment. The windshield will be replaced with real glass before sale. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear part of the vehicle can remain. Furthermore, before the sale, the bases and deflectors of the former roof-mounted rotating lights will be removed. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, for the sale, we will remove the rear wooden cabinets. This also creates space for a camper van conversion. Technically, this Vario is in good condition and does not require any immediate repairs – it has been regularly serviced according to the service schedule. All components, such as the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heater are functioning and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convector vents in the passenger compartment for draft-free heating. Maximum speed Vmax according to the vehicle registration document: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – with adjustable backrests and armrests, and the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional charge of €750, we can perform a technical modification to convert it into a camper van, which would involve removing some seats. Ibjdezthrljpfx Am Djc Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call. Iedpfx Aezzdyzsm Djbc

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. Iodpfozd Srwex Am Djbc The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: ready for operation (used), machine/vehicle number: 90-58-07, functionality: fully functional, planing width: 240 mm, overall weight: 4,200 kg, spindle diameter: 50 mm, planing height: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 120 mm Infeed table length: 1,440 mm Number of spindles: 6 pcs. Spindle diameter: 50 mm Planer shaft speed: 6,000 rpm Max. planer block diameter: 200 mm Spindle 1 Spindle position: Bottom Motor power: 7.5 kW Spindle 2 Spindle position: Right Motor power: 7.5 kW Ibsdpfx Aez Ni Edjm Djc Spindle 3 Spindle position: Left Motor power: 15 kW Spindle 4 Spindle position: Top Motor power: 15 kW Spindle 5 Spindle position: Top Motor power: 11 kW Spindle 6 Spindle position: Bottom Motor power: 15 kW Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: Manual Min. feed speed: 5 m/min Max. feed speed: 35 m/min Feed speed control: Stepless Diameter of feed rollers: 1,400 mm Diameter of extraction nozzle: 150 mm MACHINE DETAILS Voltage: 400 V Current consumption: 128 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 3,900 x 1,800 mm Weight: 4,200 kg Transport packages: 1 pc. EQUIPMENT CE marking

Condition: good (used), functionality: fully functional, power: 110 kW (149.56 HP), machine/vehicle number: B-01526-120, for sale as parts or as a complete installation feed hopper conveyor belt Ibjdsxhgywjpfx Am Dsc Andrin eddy-current separator extraction control cabinet etc.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Ibedpoz Im Skofx Am Doc Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Ijdpfx Asxv Aacsm Debc Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications Iodpjym Dbdofx Am Debc · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Specifications: Capacity: 4,000 L Isdpfx Amjzimv Ij Dsbc Internal Pressure: 10 bar Internal Temperature: 200°C Jacket Pressure: 6 bar Jacket Temperature: 200°C Legs/Lugs/Mounting Ring: Lugs

Condition: used, Year of construction: 1993, Name: Industrial decanter Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year built: 1993 Max. bowl speed: 3250 1 / rpm Material: Edelstahl Stainless Steel Driving force: 18,5 / 21 kW Inner diameter drum: 353 / 198 Ijdpfewid Nhex Am Debc Interior drum length: 1200 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: Length 3000 x width 1000 x height 1150 mm Empty weight: 2500 kg Technical doc.: Yes Message: Eddy current brake Accessories: A control cabinet Condition: Second hand Price: On demand

Condition: used, This listing is for a Bio-Rad PowerPac HC High-Current Power Supply. The unit is in full working condition and is ready for immediate release. Elevate your laboratory’s performance with the Bio-Rad PowerPac HC High-Current Power Supply, engineered specifically for high-current applications like western blotting and high-throughput electrophoresis. This robust power supply delivers exceptional reliability and precision, ensuring your experiments achieve optimal results every time. Key Features: Powerful Output: With an impressive output of 250 V, 3.0 A, and 300 W, the PowerPac HC is designed to handle demanding electrophoresis tasks effortlessly. Ibsdpfx Aexx Ai Aem Dsc Intuitive Controls: The fully adjustable voltage, current, and power settings allow for tailored configurations, while the two-line, 16-character LCD display provides clear visibility for easy programming and monitoring. Versatile Applications: Ideal for western blotting with Bio-Rad blotting cells and suitable for a variety of high-current applications, this power supply adapts to your laboratory needs. Benefits: Enhanced Experiment Efficiency: The intuitive programming enables multistep methods and timed runs, allowing you to choose between constant voltage, current, or power output for maximum flexibility. Safety Features: Built-in protection against short circuits and excessive voltage incidents ensures the longevity of your equipment, giving you peace of mind during critical experiments. Real-Time Monitoring: Stay informed with real-time voltage and current monitoring, ensuring that your processes run smoothly and effectively. Choose the Bio-Rad PowerPac HC High-Current Power Supply for unparalleled performance and reliability in your laboratory. Experience the difference in your high-current applications and achieve the results you desire with confidence.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Isdpfx Aoz N H Ensm Dsbc Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Alfa Laval aldec 406/AVNX420 complete, reconditioned with eddy current brake. Ibedpfxsucrhue Am Dec

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR Ibedpfx Ajmqkubsm Djc • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: Ibsdpemqkt Tsfx Am Dec • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics