Used Ehlers for sale (124)

Condition: used, Type Production Line Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Hfodpfxozpbl Do Aqijk

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: Hjdpfx Aqozbvn Eeiefk - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, Hjdpszbvnxefx Aqiofk are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2023, condition: used, control Siemens voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: Hjdozbvnfspfx Aqisfk - MIG welding of individual components onto cooling plates using a robot - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2010, Turntable load 2.000 mm Max. pallet length 1.200 mm Hfedpfxozbvhrj Aqijk Max. pallet width 1.000 mm Max. pallet height 2.250 mm Max. film diameter 300 mm Max. film width 500 mm Maximum turntable speed 14 U/min dimensions 2,85 x 1,52 x 1,50 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm Hjdjzbc Hhspfx Aqiofk solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Hodjzbc Hbopfx Aqiefk Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, x-travel 1.020 mm Hfedszaf Ixopfx Aqiek y-travel 510 mm z-travel 610 mm surface area 1.020 x 610 mm spindle tunring speed 10.000 U/min spindle taper SK 40 In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if Hfedsy Ihbxspfx Aqiek specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2013, condition: used, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hfedpfsy Ihbljx Aqiok Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 Hfedpfoy Dvnxox Aqijk In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, centre height 200 mm dist. between centers 1.000 mm grinding length 1.000 mm max. workpiece diameter 360 mm grinding wheel width 127 mm spindle tunring speed 1.500 U/min turning speed range - workpiece spindle 15 - 320 U/min dimensions 2,80 x 1,50 x 1,70 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has been overhauled. The guideways have been re-scraped. The spindle has new bearings. The control cabinet is new. Accessories, tools, and clamping devices shown in the images are only included if explicitly stated in the additional information. Hsdpfxoy Ay N Ds Aqisfk Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Hsdjyzt A Ujpfx Aqiefk

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hsdpfx Aqeyw Tm Eeiofk Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2018, x-travel 750 mm y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 12.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Hsdpfxeyrt A Is Aqiefk Technical features & accessories: - Twin spindle - 5-axis - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° Hfodjxq R E Njpfx Aqisk C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW Hodpfx Aqjxq R Evjiofk max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Hedpfxjxq Hkuj Aqisfk The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Hfjdpfxjxfwflj Aqijk Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc Hodpexc Nyvofx Aqiofk In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm Hedpfxjy Tbtle Aqisfk control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Year of construction: 2014, condition: used, curb weight 2.500 kg Max. load weight 2.500 kg total wight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Hodpszkbp Sofx Aqisfk - 1x Quick-Point mounting plate for the machine - 20x centering vises (77mm steel version) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2018, Dimensions: Lifter 1 1.900 x 2.065 x 2.900 mm Dead weights: Lifter 1 1.450 kg weight max. in kg 2.500 kg Hfjdpfszkbprjx Aqijk Effective stroke 1.400 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Hjdpfx Ajzi E D Doqiofk Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hfodpfxozi E Dqs Aqiek There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery ifthis is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!