Used Ehrler Und Beck for sale (87)

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Pjdpfxovvi Nnj Ah Sjgu Storage location: Supplier

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018 Pgjdpfefhbuyox Ah Ssu

Condition: ready for operation (used), Table with perforated plate, size: 500 x 400 mm Opening width: 550 mm Table height above floor: 900 mm Extraction capacity: 2000 m³/h Pressure: 2100 Pa Drive motor: 400 V, 2.2 kW Pedjxpuwtjpfx Ah Segu Space requirement: 1500 x 1050 x 1500 mm Weight: 215 kg

Condition: new, Year of construction: 2025, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Pgodstgychspfx Ah Ssu Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2010, age 2010 automatic inserting machine Pgodpfjq Iyb Uex Ah Sju computer control with touch screen vacuum table foil packing unit neo X inkjet print system HP BigJet 300 NT stacker RIMA RS 3313-S Delivery time: immediately from stock

Condition: used, total height: 2,410 mm, total width: 945 mm, total length: 1,210 mm, overall weight: 310 kg, type of input current: three-phase, volume flow: 2,500 m³/h, intake manifold diameter: 200 mm, input voltage: 400 V, nominal power: 2.5 kW (3.40 HP), Dear Sir or Madam, We hereby offer you an extraction system "ALU Waschboy 2.500/ ALU Waschblock BE-AL 2500". The above-mentioned model is designed for extracting and filtering aluminium dust during grinding, polishing, deburring, and other operations. It is used to prevent dust fires and explosion hazards. Podpfoxauflox Ah Segu

Condition: used, Year of construction: 2008, functionality: unexamined, total height: 1,500 mm, total width: 1,700 mm, total length: 3,100 mm, type of input current: three-phase, input voltage: 400 V, compressed air connection: 6 bar, L sealer Pgsdpfx Aoxnm Rpoh Seu

Condition: good (used), Year of construction: 2003, Beck shrinktunnel Passage width 600mm Passage height adjusted to 450mm, can be lowered to 300mm Hood length 1000mm Overall length 2100mm Stepless speed adjustment Digital temperature adjustment Pgodpfoinbk Uox Ah Sou

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 32 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Pgodpfx Ahjxpilxj Ssu Terms of delivery: ex location

Condition: used, Powered roller conveyor with cross chain Psdpexq R Uqofx Ah Segu Total length 4850 mm Total width 1320 mm Roller width 500 mm Roller pitch 280 mm Working height 850 mm

Condition: new, Work and Assembly Table Pgsdpfskwhwzjx Ah Sou New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11115, Foiling machine for PE foil for profiles Pgodpfx Aexght Aeh Sju

Condition: excellent (used), Year of construction: 2018, operating hours: 4,800 h, Packaging machine from Beck in near mint condition. Pedpfxsxn S Nkj Ah Ssgu The Beck SXJ HP Adapta VS is a high-performance packaging machine designed for outbound operations in e-commerce and logistics. The machine forms and seals tailor-made plastic packaging around each product—quickly and energy-efficiently. It is equipped with scanner and camera systems for product recognition, as well as integrated modules for labeling and sealing. Unlike the RT version, which is adapted for returns processing, the VS model is optimized for dispatch—where speed, precision, and packaging quality are key priorities. This machine is in near mint condition, comes complete with conveyors, and is ready for immediate operation. It is an ideal choice for those looking to streamline their packaging process without investing in brand new equipment. Shipping and installation are not included. Technical information: Manufacturer: Beck Packautomaten Model: SXJ HP Adapta VS Year of manufacture: 2018 Total length: 17,500 mm Width: 1,600 mm Capacity: Up to 30 cycles/min Maximum product length: 100–600 mm Maximum product width: 100–400 mm Maximum product height: 150 mm Operating hours: Only approx. 4,800

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Pgjdpfx Ajxn Aamsh Seu

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Pgsdpfx Aek E Hmteh Sju Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: good (used), A press is ideal for gluing up to 4200 x 500 x 70 mm. As the presses are open on the right and left, several presses can be placed in a row. For a length of around 12m, 3 presses are required. Data per press: 15 press cylinders (membrane cylinders) Press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down clamps Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight approx. 600 kg Price for 3 presses from 8000€ Pjdpfxjvq I Ufj Ah Sogu

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Pgsdpfsmv E Icsx Ah Sju Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: as good as new (ex-display), Year of construction: 2024, consisting of: ᐳ Stop rail 2 m long ᐳ 2 pieces complete stops ᐳ 1 piece measuring scale right ᐳ left Pgedpfxofrnpns Ah Ssu ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.

Condition: used, Roller conveyor Length 4300 mm Width 600 mm Height 800/900 mm Pgodoxf T Ebspfx Ah Ssu Roller length 500 mm Roller spacing 400 mm Rollers 12 pieces

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH) Podpfx Ahomv Hy He Ssgu

Condition: as good as new (ex-display), Year of construction: 2024, - of steel Psdofpa Rpepfx Ah Ssgu - filling weight 8 kg - with glue gun and pointed nozzle

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt Pgodpfxsyuv Ts Ah Sju > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 overall dimensions w x h x d in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL on request!!!

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following main data: Load capacity 1000 kg static line load useful stroke 810 mm overall height 200 mm total height 1010 mm platform length 1300 mm platform width 800 mm Material smooth sheet metal Lifting time approx. 16 sec. for the full useful stroke Lowering time load dependent Pedpfegqu A Tjx Ah Sjgu E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable motor 0,75 kW Painting blue-grey RAL 7031 Power unit placement integrated in the lifting table Control box dead man control incl. 2 m cable Total weight approx. 160 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE sign. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts at normal operation in one shift, excl. labor costs.

Condition: as good as new (ex-display), Year of construction: 2024, different lengths on request - length 3000 mm with 3 supporting feet - roller conveyor with scale, manual measuring system with adjustable and hinged length stop incl. reading magnifier - Roller and measuring track for lighter plastic, aluminium and steel profiles - max. measuring length is track length minus 250 mm - carrying rollers, roller diameter 50x1,5mm, galvanized steel tube - axle diameter 8mm - track width 390 mm, usable roller width 300mm - Load capacity per metre of roller conveyor approx. 100 kg/m - roller pitch approx. 290 mm - track height adjustable from 770-1070 mm - all parts are painted, colour silver grey RAL 7042, feet anthracite grey RAL 7016 Pgedpfx Ahsgrn U Se Sou

Condition: new, Year of construction: 2024, 4 PIECES AVAILABLE AT SHORT NOTICE with 15 supports (support surface: piping rubber) Pgedjgmht Sspfx Ah Seu dimensions: LxWxH 910 mm x 700 mm x 1850 mm shelf depth: 510 mm shelf width: min. 500 mm - max. approx. 2000 mm Distance clear width from the shelves: approx. 78 mm Load capacity. max.ca. 600 kg evenly distributed load capacity/rake: approx. 40 kg Weight: approx. 90 kg