Used Eisele Lms 1 for sale (114)

Condition: excellent (used), Year of construction: 2003, Max. saw blade diameter: up to 300 mm Machine head tiltable: 45°-90°-45°-30° Cutting diameter at 90°: 100 mm Square tube: 85 x 85 mm Flat profiles, hollow: 130 x 85 mm Speed range: 40 / 80 rpm Drive power: 1.0 / 1.2 kW Machine dimensions (L x W x H): 650 x 600 x 1650 mm Iedpfxjy E Ulls Ab Sotg Weight: 185 kg Accessories / Special Features: • Vertical guidance of the saw head • Continuously adjustable mitre facility 45°-90°-45°-30° • Infeed/outfeed roller conveyors, each approx. 1 m in length • Manual feed • Coolant system • 1 saw blade included • CE compliant This very good VMS 300 is from a training workshop. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Itjdpfxsqzmnuo Ab Sog Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Very well-maintained Behringer VMS 370 A, including infeed and outfeed roller conveyors. The machine is now in stock, refurbished, and available for immediate delivery. Itsdpjy Edcyjfx Ab Sjg

Condition: good (used), Year of construction: 2012, machine/vehicle number: 10004373, Offer 26126 Technical specifications: - Manual saw blade feed - Workpiece clamping via machine vice - Saw blade diameter up to 315 mm Ijdpjy Rz S Njfx Ab Sotg - 2 cutting speeds: 40 – 80 m/min - Cutting range at 90°: round 110 mm; rectangular 82 x 160 mm; square 82 x 82 mm - Miter cut at 45°: round 110 mm; rectangular 80 x 120 mm; square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirements approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg - Measuring stop: 3000 mm

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Iedpfx Abevdk A Ee Sstg Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1994, machine/vehicle number: A 3883, Offer 24310 Technical Data: - Manual saw blade feed - Workpiece clamping in machine vice - Saw blade diameter: 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting capacity at 90°: round 110 mm - Rectangular 82 x 160 mm - Square 82 x 82 mm - In mitre at 45°: round 110 mm - Rectangular 80 x 120 mm Isdpjy Nlthofx Ab Setg - Square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Required space approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw Isdpfxoy Ehx Ee Ab Setg - Machine light - Coolant system

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm Iedpfsy Nm Erex Ab Sotg - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Iodpfjyzcpdex Ab Sjtg

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Itodpfovbwfnox Ab Seg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Itjdpfxsy Ncfus Ab Sog Mitre cut one-sided 45°.

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Iodpfxjy Dc I Sj Ab Sotg Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Itsdpfxsy Dtpme Ab Ssg MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Year of construction: 1996, condition: used, Hydropneumatic operation Isdpfx Ajyxpw Nsb Sotg Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports) Itsdpfx Abjyyxxfo Sjg

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Itsdpfxsywtqds Ab Sjg Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Isdpstt Eb Sefx Ab Setg Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Iedpfx Ajtk Ul Rob Sotg Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Iedpfjfcbb Hox Ab Sotg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Max. stroke length: 40 mm ■ 25 double strokes/min. ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm Iodpoy S Abbefx Ab Sjtg ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Iedpfx Aeyu Rztob Sotg Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Itodpfx Abjyu Rw Io Sog Abutment height: 150 mm Weight: approx. 450 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min Isdpfx Abjh I Dvnj Setg forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Itsdpfoxln Ukox Ab Sog Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Ijdpfjd Rxw Ssx Ab Sstg cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg