Used Eisen Und Hammerwerk Gmbh for sale (71,504)

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ncodpfx Adoq R Tkwjtsr Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, Nodef Uc Uropfx Adtscr with cooling bath, puller and winder with guiding device

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Nedoiv H Ekspfx Adtjcr We can also provide machines in other dimensions.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SG10, PMH Filament strand pelletizer, Type SG10 Nsdpfx Adokyt T Sotecr compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter The speeds of both drives are infinitely variable. This allows for a wide range of pellet lengths

Condition: used, Year of construction: 2008, Name: Used CHP Unit Manufacturer: SEnergie GmbH Ncedpsy Am Rnofx Adtor Type: G6.12TI Year built: 2008 Generator: NEWAGE STAMFORD Generator Type: UC.I274D2 Generator kW: 100 kW Fuel type: Sewage gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88,9 % Dimensions: L 3.500 x W 1.100 x H 2.500 mm Empty weight: 3.000 kg Technical doc.: Yes Message: In 2018 a new engine was installed and the generator was rewound. Last service on October 15. 2021 with 86.102 hours. Accessories: A switch cabinet Condition: Second hand Price: On demand

Year of construction: 2020, condition: used, functionality: fully functional, construction height: 2,200 mm, number of spindles: 3, space requirement length: 5,000 mm, space requirement width: 5,500 mm, machine/vehicle number: 50844458, degree of automation: automatic, production capacity: 3,000 unit/h, We are offering this used PIA Automation production line for surgical disposable masks, manufactured in 2020. The system was operated for only 2.5 years in single-shift operation and can be described as being in "very good" condition. In addition to the production unit, the line includes a connected compressed air generation system as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Connection protection: 25 A Short-circuit capacity: < 10 kA System Concept: The line consists of a total of three sections, which are connected by conveyor belts. In the first segment, the individual consumables are fed in via rollers, folded, the nose wire integrated, welded, and then cut to the correct length. The finished, cut masks are then conveyed by an indexing belt and transport conveyors to the subsequent stations, which are arranged in parallel. At these stations, the ear loops are fed in and welded to the face mask. Nedey Ddnmjpfx Adtecr If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Njdegu Nmhepfx Adtscr - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine Ncjdpfxsg Dvdcs Adter

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Ncodpjtr U Hlofx Adter Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system Nodpfottagdjx Adtecr - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) Ncjdpfxsttah Rs Adtjr → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Ncedpfsx Ebzqjx Adter - weight: 800KG Made in Germany The pictures show you an older bigger machine

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) Nsdpoxuvk Eefx Adtecr - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Ncodpfxjywg Sbj Adtsr - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton 2) Double Carton Magazines 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Nodpfx Aeyy Iqkjdtjcr Stack height for endless corrugated board up to max. 2,000 mm possible 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, load capacity: 500 kg, The equipment is like new and has barely been used. Hydrobull mobile crane with counterweight, 500 kg load capacity, pre-filled, model ITI 500 N. The original Hydrobull crane with counterweight features a chassis shifted to the rear, and its uniquely curved design conceals the counterweight, which is added on-site. Thanks to the counterweight, the compact crane is flexible and ready for immediate deployment. This highly affordable original Hydrobull crane is designed for occasional use. For more frequent operation, we recommend the Elektrobull or industrial models. The compact hydraulic unit is rated for approximately 500 lifting cycles. Ncjdpey El E Nsfx Adter

Condition: used, Year of construction: 1974, Additional title: horizontal pressure tank Capacity: 150 hl Operating pressure: 4 atm Operating temperature: 20 °C Material: Stainless steel Position: horizontal Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve Ncjdjyzhv Njpfx Adtjr

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Get in & start working! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with high performance, premium build quality, and maximum operator comfort – perfect for construction, landscaping, and municipal applications. Thanks to its compact design and state-of-the-art load-sensing hydraulics, this machine is ideal for confined jobsites and powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-season professional machine! ⭐ Your advantages at a glance ✅ Swing boom – ideal for work in tight spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-efficient control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ⚙️ TECHNICAL DATA Ncodjx Hg D Ajpfx Adtsr Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat for long operating hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The scope of delivery includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any jobsite out of the box! ➕ OPTIONAL EXTRAS AVAILABLE Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from our warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery organized on request Location: Rheda-Wiedenbrück Our machines are available immediately and ready for operation. We invite you to inspect and test any of our machines on site. SPECIAL PRICE €17,500 net (RRP) Special offer available – contact us! Request more information now & secure your advantage! Demand is high – secure your LT-20 PRO today. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Nedpfxjuvigpe Adtjcr Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings Ncsdpoyb Hu Nefx Adter 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization Nedpfjyb I Azox Adtecr An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Year of construction: 2026, condition: new, functionality: fully functional, The drum-type belt blast machine is specially designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Thanks to its robust construction and high-performance turbine, the system is ideal for daily use in production environments. Technical specifications: Capacity: 180 liters Turbine: 1 pc. Turbine 3.6.10 Turbine power: 11.0 kW Turbine control: frequency controlled Workpiece data: - Max. space diagonal: 270 mm - Max. workpiece weight: 25 kg Belt: perforation Ø 8 mm Abrasive: - Suitable for round abrasive media - Automatic refill silo: 100 liters - Integrated abrasive flow regulation Extraction & noise: - Sound pressure level without sound insulation ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: approx. week 31/2026 Features: - Wear-resistant manganese lining in direct and indirect blasting zones - Turbine housing lined with tool steel Ncodpfxoyxpvlj Adter - Turbine blades made of high-strength tool steel - Turbine feed channel also made of tool steel - Abrasive collection chute beneath the machine for optimized media return Options: - Customized paint finish - Flexible filter positioning (left/right) - Loading solutions available upon request

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total length: 2,600 mm, total width: 600 mm, total height: 1,300 mm, motor manufacturer: Stöber Antriebstechnik, Equipment: type plate available, -KOM 3172- Ncodpfx Asx Ifqdodtjr Offered here is a hinged belt conveyor from Frasch GmbH&Co. KG. The conveyor belt has breakout areas on the hinged belt, which can be seen in the photos. The functionality has been tested. This hinged belt conveyor was used for transporting plastic components. Type: FGA LU: 1900/LA: 1100xW:300 Power: 0.37 kW Year of manufacture: 2016 Total length: approx. 2600 mm Total height: approx. 1300 mm Total depth: approx. 600 mm Usable belt width: approx. 265 mm Spacing between carriers: approx. 490 mm

Condition: like new (used), Year of construction: 2015, operating hours: 27,000 h, functionality: fully functional, Used Combined Heat and Power Unit (CHP) Manufacturer: 2G Energietechnik GmbH Model: G4076 Engine: MAN Gas Engine Electrical Power: approx. 400 kW Voltage: 400 VAC / 24 VDC Frequency: 50 Hz Year: 2015 / 2017 Condition: Used, in working condition - Complete CHP unit - Control cabinet - Control system / HMI - Gas engine and generator - Delivery as inspected Price: EURO 125,000.-/EXW (Loaded) Location: Germany/Düsseldorf Ncjdpfxoyxl Uqo Adtsr Delivery: EXW (Ex Works)

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. Nsdpewf Rg Ssfx Adtjcr --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in