Used Elektromotor 160 Kw 2960 U Min B3 B5 for sale (77,928)

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV, clamping cylinder stroke 30 mm -Type: 25-160 WS 08110 Kjdpfxowzigio Addjll -Shaft Ø 12 mm -Number: 1x clamping cylinder available -Dimensions: Ø 50 x 128 mm -Weight: 1.4 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership Kljdpeb Uhp Iofx Addsl -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts Ksdsb Uhpwjpfx Addsll -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership Kjdpfx Adob Uhrtedjll -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: Kljdpfx Aoxgf Scoddsl — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Kledpfx Aerh E Disddjl Manufacturer: Cormak

Condition: used, Year of construction: 2000, functionality: unexamined, volume flow: 19.6 m³/h, Technical Data Manufacturer: BOGE Kompressoren Model: S 220 Year of Manufacture: 2000 Machine No.: 38295 Free Air Delivery: 19.60 m³/min Kjdpfx Adoxy Sk Sjdoll Final Compression Pressure: 15 bar Motor Speed: 1500 rpm Motor Power: 160 + 0.75 kW Control System: BOGE Ratiotronic

Condition: used, mileage: 3,264 km, power: 135 kW (183.55 HP), first registration: 04/2024, fuel type: electric, axle configuration: 1 axle, next inspection (TÜV): 04/2026, fuel: electricity, brakes: other, color: white, driver cabin: other, gearing type: other, suspension: other, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, truck registration, ... Subject to alterations, prior sale and errors excepted Ksdjq H Rq Aepfx Addoll

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Kedpfsi Dnpxox Addell Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Kljdpfsd Aqqzox Addsl Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total height: 480 mm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-entry, single-stage, Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with sealing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters are specified on the type plate. Kodpfx Aefyn Rpjddell Not the actual flow rate at the best point !!!! I have stored 2 characteristic curves as a photo. Photo 11: Best point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Delivery head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data operating point for last application approx. Flow rate: 2.2 m³/h Delivery head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Housing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency. IE 2 Voltage: 400/ 690 Volt Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: good (used), Year of construction: 2011, Item: M-8698-Busch-Vacuum pump 75 kW Used Vacuum Pump Busch, Type WT0730AMX Kledpennz Rpsfx Addsl MAX. Vol: 73 m3/min Motor: Høyer Motors Denmark 75 kW Year: 02-2011

Condition: used, self centering hub (5146) Kledpfx Adedb Uzxsdel Make WMW maximum 2800 RPM.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm Kljdpfxjuqf Ufo Addsl -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm Kedpfx Aop Udipoddjll -Weight: 3.0 kg/pc.

Condition: good (used), Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts Kledpfx Aedv H E Ieddol -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 Ksdpogx Al Usfx Addoll -Dimensions: 300/225/H200 mm -Weight: 19 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW Klsdpfxerk S Dfo Addol -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Condition: used, Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, gear motor -Spindle head: spindle tool 7.4 rpm Kjdpfjtz Huzex Addjll -Gearbox: Type Z 8 i = 386 -Engine: Groschopp MDM 100.70 0.25 kW -Shaft: Ø 18 mm -Dimensions: 510/185/H240mm -Weight: 12.3 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan Kedpfsdz Umiox Addoll -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW -Speed: 2850 rpm Ksdjun Dv Njpfx Addjll -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 165 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 108 mm -Dimensions: 370/365/H310mm -Weight: 8.2 kg Klodsun Dwgepfx Addol

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm Klodpfx Aexc Eiyeddel -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Condition: good (used), screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor, trough screw conveyor, trough screw conveyor -Conveyor screw: Conveyor length: approx. 2500 mm -Design: stable -Drive motor: EM Marelli 1.5 kW -Gearbox: Rossi -Speed: 24 - 200 rpm -Conveyor screw: Ø approx. 240 mm -Conveyor screw pitch: 230 mm -Inlet/Outlet: 255 x 225 mm -Dimensions: see technical drawing in the photos Klsdewna Rljpfx Addjl -Transport dimensions: 3380/600/H670 mm -Weight: 310 kg

Condition: good (used), geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Kljdpec U Dptjfx Addsl Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg