Used Emergency Stop Button for sale (10,871)

Condition: good (used), Power supply, switching power supply, CNC control, E-STOP UNIT Kodpfji Au Tisx Ab Nonc -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 12 kW (16.32 HP), Manufacturer: CGM Sound pressure level at 7m dB(A): 72 Maximum power, 3-phase: 15.0 kVA / 12.0 kW Maximum power, 1-phase: 13.8 kVA / 11.0 kW Voltage: 400 Volts, switchable to 230 Volts Frequency: 50 Hz Gasoline engine: CGM OHV 720 Emission stage: STAGE V Cooling system: Air-cooled Cylinders: 2 Displacement: 713 cm³ Speed: 3000 rpm Electric start Battery: 12 V (Not covered by warranty) Fuel consumption at 3/4 load L/hour: 4.9 Generator: AVR regulation With brushes Ability to handle unbalanced loads: max. 25% phase-specific overload Circuit breaker Emergency stop switch Operating hour counter Frequency/voltmeter Wheel set with folding handle Sockets: Kjdpfx Absz Stcrj Nenc 1 x 32 A - 400 V/5-pin 2 x 32 A - 230 V/3-pin 12V DC socket Dimensions and weight: Length: 870 mm Width: 588 mm Height: 726 mm Weight, dry: 184 kg Tank capacity: 40 l

Condition: new, functionality: fully functional, overall weight: 163 kg, fuel type: diesel, tank capacity: 16 l, color: white, output current: 11 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 6 kW (8.16 HP), nominal power (apparent): 7 kVA, total length: 900 mm, total width: 560 mm, total height: 800 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, number of cylinders: 1, cubic capacity: 498 cm³, fuel tank capacity: 16 l, insulation material: F, protection type (IP code): IP23, Diesel generator set GB8500VTS, brand new, available immediately from stock, minor paint damage possible. 84419 Schwindegg. SWITCHABLE BETWEEN 230 V (32 A) AND 400 V (16 A) The unit can be switched between single-phase operation with 230 V and three-phase operation with 400 V via the control panel. The VTS phase switching system enables the use of a single generator in both single-phase mode (230 V) and three-phase mode (400 V) with virtually no power loss. The key point: In a purely three-phase 6 kW generator, only approximately 2 kW is available per phase. This is often insufficient for a circulation pump, a deep well pump or a cooling system. With the GB8500VTS, the full power is available on one phase in single-phase operation, and the 32 A socket is designed accordingly. CONTROL PANEL Digital display HJ-502 for voltage, current, power, frequency and operating hours. Key switch, emergency stop, preheating button, rotary switch 400 V / 0 / 230 V. Connection for an automatic mains failure (AMF) module is available. GENERATOR AND ENGINE Self-excited synchronous generator with AVR voltage regulation, insulation class F, protection class IP23, designation according to ISO 8528-1. Single-cylinder diesel engine, air-cooled, four-stroke, direct injection, electric start, preheating device and decompression switch for safe cold start in winter. Diesel without bio-components, oil capacity 1.65 l, tank 16 l with fuel level indicator. DESIGN Soundproof canopy, 68 to 72 dB(A) at 7 m distance. Transport kit with 4 wheels and 2 handles. Dimensions 90 x 56 x 80 cm, weight 163 kg. DC output 12 V / 8.3 A. DELIVERY SCOPE Generator with built-in start battery, matching mating connectors for the 400 V and 230 V outputs, tool kit and user manual in German. No assembly required. Oil and fuel are not included. Warranty 12 months according to our general terms and conditions. OTHER MODELS FROM THE SAME WAREHOUSE GB8500: 7.5 kVA / 6.0 kW, air-cooled, purely three-phase 400 V, 11 A, single-cylinder, 16 l tank - same engine, the most affordable model in the series. GB85001Ph: 7.5 kVA / 6.0 kW, air-cooled, purely single-phase 230 V, 32 A, single-cylinder, 16 l tank. GB11000VTS: 9 kVA / 7.5 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, single-cylinder, 30 l tank. GB13000: 12.5 kVA / 10 kW, air-cooled, purely three-phase 230 V, 16 A, two-cylinder, 25 l tank. GB13000VTS: 7.36 kVA or 12.5 kVA / 10 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, two-cylinder, 25 l tank. GB50: 50 kVA / 40 kW, water-cooled, SmartGen, four-cylinder, 95 l tank. Knodjzwwzwopfx Ab Nsc GB80: 100 kVA / 80 kW, water-cooled, SmartGen, four-cylinder, 165 l tank. Data sheets for all models available upon request. QUANTITIES AND BULK PRICES Larger quantities immediately available from stock. The price applies to single purchases. Container and complete deliveries possible. DELIVERY Pickup in 84419 Schwindegg by appointment. Shipping as individual items or by freight forwarder, freight costs to destination on request. Export to third countries possible. SELLER Geisberger Gesellschaft für Energieoptimierung mbH, Hassenham 4, 84419 Schwindegg. VAT ID DE 204232112 As a family-owned company, we have been building combined heat and power plants and emergency power systems since 1999 and answer technical questions ourselves from our location in Schwindegg, Upper Bavaria.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. Knjdpfx Asvyp H Ujb Noc The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: new, Two buttons and emergency stop switch Knodjtr Ei Repfx Ab Nec Length 129 mm Width 70 mm Height 65 mm Total height 92 mm unused, from magazine release several available

Condition: ready for operation (used), operating hours: 418 h, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: diesel, type of cooling: air, Very well-maintained engine, very few hours of use. Kjdoz Sxgispfx Ab Njnc

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Ksdpfx Asz Rk Iceb Njnc Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: good (used), Emergency stop switch, emergency stop switch, rope pull emergency switch -Manufacturer: Kiepe, cable pull emergency stop switch -Type: SEM 001 -Dimensions: 270/160/H130 mm -Weight: 5.3 kg Knedpfxjzt H T Us Ab Nsc

Condition: excellent (used), Year of construction: 1984, operating hours: 613 h, functionality: fully functional, fuel: diesel, rotational speed (min.): 1,500 rpm, BAUDOUIN 12 P15.2 SR4 diesel generator. 800 kVA power capacity. Powered by a 987 HP Baudouin engine, perfectly suited for inboard marine applications and engineered for unparalleled performance and reliability. Exceptionally low usage with only 613 operating hours. Includes an air-cooled water radiator and control panel. Available and ready for immediate shipment. Please feel free to contact us for more details. Knodpfxj Aa D A Re Ab Nsc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10116, Automatic length stop Stromabstop 4500, year of manufacture 2024. Functions as a stop or positioner, useful stroke 4500 mm with a length of 5000 mm, modular in length with a reversible position (right and left). Profile in anodized aluminum 105 x 90 mm, toothed belt 32 mm reinforced with steel cables, stepper motor 6 Nm multi-voltage 115 - 230 VAC, 50/60 Hz. Repeat accuracy +/- 0.1 mm, positioning speed 60 m/min. 7-inch color touchscreen SMART 7, absolute or progressive working mode, USB port on the front for importing cutting lists and 8 preset sizes. CE version. Supplied with a roller table 4500 x 280 mm with rollers with a diameter of 32 mm and front support 4500 x 280 mm. Kedsz Ngkwopfx Ab Njnc

Condition: used, mileage: 101,500 km, power: 120 kW (163.15 HP), first registration: 07/2023, fuel type: diesel, empty load weight: 2,022 kg, overall weight: 3,100 kg, wheelbase: 3,200 mm, fuel: diesel, energy efficiency: B, CO₂ emissions: 163 g/km, fuel consumption (urban): 6.9 l/100km, fuel consumption (extra-urban): 5.8 l/100km, fuel consumption (combined): 6.2 l/100km, color: grey, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 8, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, XZ1 model generation 1, CU4 aerodynamics package, EY2 live traffic information, FR8 rear-view camera, G43 9G-TRONIC, H16 seat heating for driver, W65 tailgate, E07 hill-start assist, LA2 headlight assistant, MJ8 ECO start-stop function, H00 warm air duct to passenger compartment, HZ0 auxiliary heater, electric, HZ7 air conditioning, semi-automatic control, TEMPMATIC in the rear, CL4 multi-function steering wheel with trip computer, JK3 instrument cluster (pixel matrix display), MS1 cruise control, F68 exterior mirrors, heated and electrically adjustable, MX0 BlueEFFICIENCY package, SH1 thorax-pelvis sidebag, driver, SH9 windowbags for driver and front passenger, SA6 front passenger airbag, SH2 thorax-pelvis sidebag, front passenger, E1D digital radio (DAB), SB1 comfort driver's seat, SB2 comfort front passenger seat, VV9 attachment points in the roof frame, V36 roof lining, CF7 comfort chassis, IL5 left-hand drive, RG1 tires 205/65 R16, RS3 steel wheels 6.5 J x 16, F66 lockable glove compartment, H20 heat-insulating glass all around, LE1 adaptive brake light, JW8 Attention Assist, C70 pedestrian protection, EY5 Mercedes-Benz emergency call system, EL9 2-way speakers front and rear, U63 3-seater bench seat in 2nd row (folding, rotating, removable) with Isofix and Top Tether on the outside, 2 single seats in the 3rd row, KP7 exhaust gas purification SCR generation 4, T14 active locking mechanism for sliding door, EA4 Audio 40, IB6 model series C447 Vito/V-Class, BB7 CO2-optimized brake system, W70 tinted glass in the rear, black glass, EW6 digital extra: Remote Services Plus, E57 electrical system for trailer socket, MO6 emission class Euro 6d-TEMP M/N1 GR. II, M72 vehicle compatible with HVO, K51 misfueling protection, W29 fixed rear window, W78 window in tailgate with wiper and washer system, W17 window on the right, fixed in side wall/sliding door, W16 window on the front left, fixed in side wall/sliding door, M60 generator 14 V / 250 A, MG9 generator management, MK8 speed limiter 210 km/h, XA8 weight variant 3.100 kg, J55 seatbelt warning system for front passenger, HH9 semi-automatic air conditioning, TEMPMATIC, T74 grab handle for entry, VH1 grab handle in the rear, T75 grab handles for entry, driver and front passenger, KB5 main tank 70 liters, FR1 rear camera, not foldable, A1O rear axle shaft manufacturer IFA, LD9 interior light(s) in the rear, F61 interior mirror, XY3 model year 3 Knedpfx Abjzmaynj Noc Note: Despite careful checking of all our price listings, errors still occur from time to time. Some of these are caused by transmission errors in the systems of the various platform providers. But errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price listing also cannot be declared as part of the contract. If you attach particular importance to a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Condition: good (used), Bacciottini Pit Stop AFSpeed ​​Automatic Creaser The device is fully operational and ready to use. It is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Kjdpfx Abjz Dtayj Nonc Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 100 x 150 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 200 kg Dimensions: 1600 x 800 x 1200 mm

Condition: used, mileage: 114,032 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 5 m³, loading space length: 2,535 mm, loading space width: 1,600 mm, loading space height: 1,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle no. for customer inquiries: 216 ----MKL particulate filter warning light - Vehicle operates normally ----Special equipment: * Air conditioning system (Tempmatik) * Fuel tank: enlarged * Windshield wipers with rain sensor * Audio system Audio 10 (DAB, Bluetooth) * Audio system Audio 10 (Radio with CD player) * Exterior mirrors, electrically adjustable and heated, both sides * DAB tuner (digital radio reception) * Automatic headlight activation * All-weather floor mats * Vehicle without tie-down points * Rear door without glazing (opening angle 270 degrees) * Wooden floor in the cargo area * Seat cover / upholstery: Rawson fabric * Seats in the cab: co-driver seat as a two-seater * Seats in the cab: driver's seat plus (with flat seat surface) * Paneling in the cargo/passenger compartment: standard * Heat-insulating glass * Two-way speakers in the front ----Standard equipment: * 3-button remote control for central locking * 3rd brake light * Adaptive brake light * Airbag, passenger side * Airbag, driver side * Hill-start assist * Anti-lock braking system (ABS) * Drive type: front-wheel drive * Exterior mirrors, aspherical, both sides * Outside temperature display * Mounting rails for roof rack * BlueEfficiency package * Brake assistant Knedpfx Abox Uu Tnj Noc * Braking system with ABS+ASR * Dome light in the cargo area * Design and equipment line Base * Electronic stability program (ESP) * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Breakdown management * Driver assistance system: Crosswind assist * Power windows, electric, 2-way * Windshield with antenna * Generator 185 A * Speed control system (cruise control) * 6-speed transmission - FSG * Cup holders in the rear * Cup holders in the front * Seat belt pretensioners * Grab handle, passenger side * Glove compartment, lockable * Body/structure: van * Body/structure: long * Communication module (LTE) for digital services * Cargo area partition, full height * Mercedes-Benz emergency call system * Model upgrade * Engine 1.7 L - 75 kW CDI CAT * Rear fog lamp * Particulate filter * Wheelbase 3200 mm * Low emission according to emission standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right side * Power steering * Safety belt system with warning system (driver/passenger side) * Steel rims 6.5x16 * Daytime running lights * Trim, window pillars * Paneling in the cargo/passenger compartment: hard fiber, half-height * Tie-down rails in the cargo area - side wall to roof frame * Fleece battery 92 Ah * Service interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight 2.80 t ----Technical data: * Wheelbase: 3,200 mm * Cargo area dimensions: L: 2,535 mm, W: 1,600 mm, H: 1,360 mm * Payload: 801 kg * Tire size: 205/65R16C * Tire tread: approx. 60-70% ----€9,850 net, plus VAT - fixed offer price!!! * When exporting to third countries or EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/

Condition: used, mileage: 127,555 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 5 m³, loading space length: 2,535 mm, loading space width: 1,600 mm, loading space height: 1,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 149 ----Special equipment: * Air conditioning system, controlled (Tempmatik) * Windshield wipers with rain sensor * Seats in the cab: passenger seat as a double seat * Audio system Audio 10 (DAB, Bluetooth) * Audio system Audio 10 (radio with CD player) * Exterior mirrors, electrically adjustable and heated, both sides * DAB tuner (digital radio reception) * Automatic activation for headlights * All-weather floor mats * Vehicle without lashing points * Rear door without glazing (opening angle 270 degrees) * Wooden flooring in the cargo area * Fuel tank: enlarged * Seat cover / upholstery: fabric Rawson * Seats in the cab: driver's seat plus (with level seat surface) * Interior trim in the cargo/passenger compartment: standard * Heat-insulating glazing * Two-way speakers in the front ----Standard equipment: * 3-button remote control for central locking * 3rd brake light * Adaptive brake light * Airbag, passenger side * Airbag, driver side * Hill-start assist * Anti-lock braking system (ABS) * Drive type: front-wheel drive * Exterior mirrors, aspherical, both sides * Outside temperature display * Mounting rails for roof rack * BlueEfficiency package * Brake assist * Braking system with ABS+ASR * Dome light in the cargo area * Design and equipment line Base * Electronic stability program (ESP) * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Power windows, electric, 2-way * Windshield with antenna * Generator 185 A * Speed limiter (cruise control) * Transmission 6-speed - manual transmission * Cup holders in the rear * Cup holders in the front * Seat belt pretensioners * Grab handle, passenger side * Glove compartment, lockable * Body/structure: panel van * Body/structure: long * Communication module (LTE) for digital services * Bulkhead between cab and cargo area * Mercedes-Benz emergency call system * Model update * Engine 1.7 L - 75 kW CDI CAT * Fog lights, rear * Particulate filter * Wheelbase 3200 mm * Low emission according to exhaust standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * Power steering * Safety belt system with warning system (driver/passenger side) * Steel rims 6.5x16 Knjdpfezirziex Ab Noc * Daytime running lights * Interior trim, window pillars * Interior trim in the cargo/passenger compartment: hard fiber, semi-high * Lashing rails in the cargo area - side wall to roof frame * Dry-fit battery 92 Ah * Service interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight 2.80 t ----Technical data: * Wheelbase: 3,200 mm * Cargo area dimensions: L: 2,535 mm W: 1,600 mm H: 1,360 mm * Payload: 796 kg * Tire size: 205/65R16C * Tire tread: approx. 50%-30% ----€9,999 net plus VAT * A deposit will be retained for export to third countries or EU countries. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-bin

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Knodez H I D Sjpfx Ab Njc Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, type of cooling: water, total width: 1,050 mm, total length: 2,700 mm, total height: 1,430 mm, fuel: diesel, overall weight: 1,400 kg, continuous power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 7,100 cm³, warranty duration: 12 months, noise level: 70 dB, fuel tank capacity: 135 l, tank capacity: 80 l, protection type (IP code): IP23, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 144 A, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Ricardo R6105AZD, Equipment: documentation/manual, Generator set | Emergency power | RTE100 | 100 kVA | Diesel | Silent | 2026 | NEW | 230/400 V | ATS | Battery charger The RTE 100 kVA diesel emergency generator set provides 100 kVA or 80,000 watts for the stationary emergency power supply of industrial plants, commercial enterprises, agricultural operations, public facilities, and buildings with high requirements for supply reliability. The sound-dampened, water-cooled generator automatically or manually takes over the power supply in the event of a power failure. Knjds Aaf Unspfx Ab Njc The generator set is powered by a robust Ricardo R6105AZD diesel engine – a British engine brand with over 100 years of experience in building engines for vehicles, trucks, and ships. The generator provides 400 V three-phase power with 144 A at 50 Hz. The 135-liter tank enables a runtime of up to 8 hours at 75% load (consumption approx. 17 l/h). The integrated ATS module automatically switches to generator operation in the event of a power outage. In addition, 2 × 16 A (230 V) and 2 × 32 A (400 V) sockets are available. The generator set is designed for stationary use with a fixed connection – the reliable backup for companies where downtime becomes expensive. The generator comes with a 12-month warranty, and spare parts are available at all times. It is a new product in its original packaging. If you have any questions or specific requirements, we are always happy to assist you – write to us or call us directly. Technical data Manufacturer: RTE Model: Diesel emergency generator set 100 kVA Type: Sound-dampened, water-cooled Power: 100 kVA / 80 kW Voltage: 400 V, 3-phase Engine: Ricardo diesel engine R6105AZD Frequency / Speed: 50 Hz / 1,500 rpm Mains changeover: ATS module integrated Battery charging: Charger integrated Sockets: 2 × 16 A, 2 × 32 A (230 / 400 V) Fuel tank: 135 liters Runtime: up to 8 hours at 75% load Manufacturer's warranty: 12 months Fuel: Diesel

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Kjdpfx Absxdwbks Njnc Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, 250 kVA – soundproof unit with an internal tank, currently being converted to an external tank. Manufacturer: WA-Notstromtechnik Engine: DEUTZ Engine power: 265 kW Generator: 200 kW / 250 kVA Tank capacity: approx. 350 liters Year of manufacture: 2012 Operating hours: 24,633 hours Last service: 21,000 hours Last use: Autumn 2024 Dimensions: Length: 3.60 m Width: 1.50 m Height: 2.20 m Weight: approx. 4.2 tons Additional tanks for extra fuel supply can be offered with capacities ranging from 1,000 to 10,000 liters. Loading and transport can be arranged. Only serious and legitimate inquiries including the following information will be answered: Knsdpfx Abo Aa Ityo Njc Name, email address, and telephone number.

Condition: good (used), Pull-wire emergency switch, emergency stop switch, pull-wire emergency switch Ksdjxbznvepfx Ab Njnc -Manufacturer: Kiepe, pull-rope emergency switch -Type: SEB 00? see photos -Dimensions: 240/130/H150 mm -Weight: 5.3 kg

Condition: used, Year of construction: 1989, Generator set / emergency generator Manufacturer: Kirsch Type: D250-41WE Year of manufacture: 1989 80 operating hours 250 kVA / 200 kW, 400 V, 361 A, 50 Hz Engine continuous power: 221 kW Weight: 2,600 kg Kjdpfx Aeztmdgeb Nsnc 191026ä

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Kjdporiuutefx Ab Nenc Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: new, Year of construction: 2023, functionality: fully functional, Manufacturer: CGM Continuous power, 3-phase: 41.0 kVA / 32.8 kW Maximum power, 3-phase: 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA, approved for stationary operation only Cooling system: Water Fuel: Diesel Cylinders: 4 Displacement: 3319 cm³ Intake: Normal Speed: 1500 rpm Fuel consumption at 3/4 load L/hour: 8.5 Generator: MECC ALTE Knodpfxoz Snzpe Ab Njc Type: Brushless AVR regulation Digital control ComAp AMF Load connection panel Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Weight, dry: 880 kg Fuel tank capacity: 200 l Oil collection tray Coolant preheating Battery trickle charge 3-way valve Soundproof enclosure: RAL 3000 Red Base frame: Black

Condition: used, Weinig electronic length stop for window production, for positioning and feeding timber during sawing or similar operations. Technical data: - Max. workpiece length approx.: 2,300 mm - Dimensions (L x W x H) approx.: 3.8 x 1.3 x 1.15 m Kodpfx Ajzryz Neb Nenc - Travel distance approx.: 2,800 mm

Condition: like new (used), Year of construction: 1999, operating hours: 68 h, functionality: unexamined, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 3,200 mm, total height: 2,270 mm, fuel: diesel, overall weight: 2,500 kg, continuous power (apparent): 160 kVA, continuous power: 128 kW (174.03 HP), rotational speed (max.): 1,500 rpm, input current: 317 A, input frequency: 50 Hz, Make: Elbe Model: VP160/220 Year of manufacture: 1999 Serial number: 8623 Operating hours (recorded): 68 Capacity (kVA): 160 PRP / 220 STD Capacity (kW): 128 PRP / 176 Knsdszvapzopfx Ab Nec Engine make: Volvo Penta Engine model: TD710G Fuel: Diesel Alternator make: Mecc Alte Alternator model: ECN37-SD4 Voltage: 230-400 Frequency (Hz): 50-60 RPM: 1500-1800 Amperes (A): 317 Dimensions L x W x H (mm): 3200 x 1000 x 2270 Weight (kg) approx.: 2500 Quantity in stock: 1 Manufactured in: Germany Comments: Ex emergency generator set in good condition.

Condition: new, Year of construction: 2023, functionality: fully functional, fuel: regular/benzine 91, Manufacturer: Pramac Continuous power, single-phase: 6.0 kVA / 5.5 kW – 230V Maximum power, single-phase: 7.2 kVA / 6.4 kW – 230V Honda gasoline engine, model GX 390 Emission stage: STAGE V Kedpjz Sqdyjfx Ab Njnc AVR electronic generator regulation Manual start Fuel tank capacity: 11 liters Socket panel: 1 x Schuko 1 x 32 A – 230V Weight: approx. 73 kg Dimensions in mm: 729x500x536