Used Emergency Stop Button for sale (9,648)

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Gsdpfsidln Tsx Abvstw

Year of construction: 2025, condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever Gtedpfx Aboidmppsvjw -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials Gjdpfx Aeidmp Tebvstw • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 2025, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m Godofv T Dwjpfx Abvstw • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2025, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder Gtjdpfx Abefv T Nmjvjw • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2025, condition: new, With our manual length stop MD 50 m, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length is measured using an easy-to-read measuring tape with mm graduation and vernier. Existing machines / roller conveyors can be retrofitted at any time. Gtodpfsidln Eox Abvew

Year of construction: 2025, condition: new, AUTOPOS – Motorized Length Stop for Precise Positioning The AUTOPOS motorized length stop is designed for material weights up to 150 kg/m. It is ideal for use with profiles and solid aluminum materials. Especially suited for aluminum processing with a roll width of 300 mm on circular saws and underfloor saws. Product details: ✔ Plastic roller diameter Ø40 mm ✔ Roller width 300 mm ✔ Load capacity up to 70 kg/m Gtsdpepa Nzksfx Abvjw ✔ Height adjustable from 800 to 1050 mm ✔ Measuring accuracy 0.1 mm ✔ Program with 20 job memory locations ✔ Motor power: 0.16 HP ✔ Automatic positioning with a maximum speed of 18 m/min ✔ Slow movement of 0.6 m/min Available variants: AUTOPOS-3 – Measuring length 3000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-4 – Measuring length 4000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-6 – Measuring length 6000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-8 – Measuring length 8000 mm, available upon request Perfect For precise aluminum processing with high repeatability and easy operation. Plantec Maschinen GmbH

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping Gjdpfeidlpiox Abvetw -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, Year of construction: 2024, stock item immediately available consisting of: ᐳ Stop rail 3 m long ᐳ 2 complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right Gtedpofnp Swjfx Abvew ᐳ Mounting screws - The scope of delivery does not include the wooden base strip 50 x 45 mm onto which the stop rail is screwed.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Gedpfxswc Ri Io Abvotw Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting Gedpfx Abowc Rk Eevotw No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Godpfx Aowc Afhjbvetw Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Year of construction: 1977, condition: good (used), 2 pieces DDR emergency power generators Engine manufacturer: VEB SKL Magdeburg GDR Type: 8NVD26 A2 year of construction: 1977 continuous power: 294 kW max. line: 323 kW displacement: 52,96 liters compression ratio: 14 engine speed: 750 rpm specific fuel consumption: 224 g/kwh fuel consumption in 8 hours:640 liters boost pressure ratio: 1.38 charge air temperature after supercharger: 60°C Generator: Manufacturer: VEM Dessau Type SSED 509-8a voltage 400 volt electrical power: 330 kVA cos. F: 0,8 Dimensions: Length 4270 mm, width 1516 mm, height 2030 mm. Total weight approx. 8500 kg per piece Gedpfx Aoigyt Hjbvstw !! Further information exclusively by telephone !!!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. Gtedpfx Abjvyp H Ujvjw The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: excellent (used), Year of construction: 2017, operating hours: 25 h, functionality: fully functional, overall weight: 2,300 kg, fuel type: diesel, continuous power (apparent): 126 kVA, For sale an emergency power generator suitable for factories, a powerful 126kVA power will power many devices and machines. IVECO engine after a general check, replaced oils, filters, fully functional. Mecc Alte power generator producing up to 126kVA, this generator was connected in one hall and used only once for 3 hours! We are also able to make a generator body and deliver it to the specified address! More information from the seller. Automatic operation system: Thanks to the built-in ATS system, the generator is in "standby" mode and is constantly ready to start automatically when the power goes out in the network. The principle of operation is simple, after a specified time from the moment of the power outage, the generator will turn on by itself, while when the power returns, the generator will turn off, restoring the power from the network. A solution that will work great in gastronomy, offices, manufacturing companies - everywhere where the generator is an emergency source of energy. Additional advantages include a) maintenance-free b) no interference in the operation of the generator by third parties c) the fastest possible restoration of energy in the facility ✔ Automatic battery charging ✔ Start-up reliability ✔ Possible connection in single-phase and three-phase installations ✔ Mechanical lock Mecc alte 126 kVA = 101 KW AC generator Manufacturer: English Mecc alte Model: ECP 24 2S4 Fuel: Diesel Year of production: 2017 - but never used. Serial number: 0002006067 Meter setting: 10 M/h Weight (kg): 2300 IP: 23 Power: 126kVA CE marking: Yes Measurements: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m Note The price given is in net value and is valid for Export and for companies. A large discount is possible for individual customers - We invite you to contact us directly by phone to get your best price :) ————— After price negotiations, we are able to record a detailed video (for a determined customer) or perform a computer test or paint meter test, so as to ensure comfortable conditions for purchasing equipment remotely. —————- Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe transaction. Additionally, the possibility of obtaining a technical guarantee with Assistance without a km limit. ————— Gtjdpsv Rbt Usfx Abvjw THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE ANNOUNCEMENT.

Year of construction: 2023, condition: new, Performance data: Continuous power (PRP) 600 kVA, engine: MTU 12V1600G10F exhaust-optimized, generator ACG, 4 pole generator LS manual, 700l tank, connection for external tank, control ComAp IG200, acc. data sheet Gedpfeq H H Nlex Abvjtw

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Light steel manufacture Gtjdpfx Abjwaztlevsw • Sheds manufacture • Signs and displays manufacture • Fencing manufacture • Windows and doors manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 6 m Stroke: 5674 mm Pushing capacity: 10-20 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Hardwood timber manufacture • Sawmill timber processing • Agricultural manufacture Can be used with all your existing saws including: • Band saws Godpfxjf Dqlwe Abvetw • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 8 m Stroke: 7560 mm Pushing capacity: 120-400 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Structural steel processing • Steel frames fabrication Gtjdpfx Absf Dqp Esvew • Agricultural manufacture • Steel tube bending • Retail steel sales Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 10 m Stroke: 9560 mm Pushing capacity: 120-400 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 6 m Stroke: 5580 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. Gtedpfxof Dqhlo Abvow QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy materials cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Gtedpof Dqgkefx Abvjw Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Steel fabrications manufacture • Garage and sheds manufacture • Furniture manufacture • Stairs and balustrades manufacture • Retail steel sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture Gtjdpfxjf Dqdpj Abvow • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: Gjdpfxef Dqhas Abvotw • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. Godpfx Abjf Dp Nbevstw • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Light steel manufacture • Sheds manufacture • Signs and displays manufacture • Fencing manufacture • Windows and doors manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 3 m Stroke: 2674 mm Pushing capacity: 10-20 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Gedpfx Ajf Dp Nqjbvjtw Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Kitchens and wardrobes manufacture • Stairs and banisters manufacture • Furniture manufacture • Windows and doors manufacture • Woodcraft manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 3 m Stroke: 2674 mm Pushing capacity: 10-20 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.