Used Emergency Stop Relay for sale (10,087)

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay -Manufacturer: Klöckner Moeller, time relay multifunction relay -Type: TE 69-A -Number: 1x relay available -Dimensions: 80/25/H100 mm -Weight: 0.1 kg Podpfxjw A I E Te Ah Asrc

Condition: like new (used), input voltage: 400 V, fuel: diesel, continuous power (apparent): 1 kVA, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Caterpillar 1750HD 3512 Genset, Diesel , only 209h run hours, very nice condition, Generator SR4B, 400V 50Hz 1750KVA, incl. big control cabinet for: frequency syncronize, load management, parallel use, island use, grid suport use, battery charge, fuel management, ec. ec. two units availlable. Prjdpfsuhhwcsx Ah Aec

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke Pedjw A Amrjpfx Ah Aorc - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: good (used), Year of construction: 2002, saw blade diameter: 425 mm, cutting range round steel at 90°: 145 mm, total length: 1,200 mm, total height: 1,800 mm, total width: 900 mm, overall weight: 1,000 kg, Sawblade: ø 425 mm Sawcapacity: 145 mm round, 120 mm square Saw mitre: 45º left/right Sawspeed: 18 / 36 m/min. Autom. length stop: MPS, type 4010, 8 meter long Featured with: - Half automatic - Hydraulic clamping - Variabele sawing feed Pjdpfx Aeunhl Ijh Ajrc Country of origin: Germany Motor power: 5,5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Condition: excellent (used), Year of construction: 2009, Marel scale. Type - START/STOP Scale. Year of manufacture - 2009. Conveyor dimensions - Length - 85cm. Width - 60cm. Height - 90cm. / adjustable height. 3 pcs. in stock. Price is per piece. DANP.20. Prodpfx Ajh Nvd Heh Aec

Year of construction: 2008, condition: excellent (used), Stromaggegat power generator Running - Ready for operation Manufacturer: SDMO Type: R165 Year of manufacture: 2008 Predjium Eispfx Ah Aoc Power: 165 KVA Engine: John Deere 6068HFS73 Hours: 19.048 h

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay Podpfx Aow A I Dvoh Asrc -Manufacturer: Dold, time relay multifunction relay -Type: IK 7817N.81/200 -Number: 1x relay available -Dimensions: 90/20/H60 mm -Weight: 0.1 kg

Condition: refurbished (used), Relay comb relay V23054 D1020-F104 from Axicom 0232 Made in Germany used good condition Psdpfx Ahjfc Dv Ns Asrc Expansion of index machines GE42 / GE65

Condition: used, operating hours: 1,500 h, total width: 19,900 mm, total length: 36,200 mm, total height: 17,600 mm, fuel: diesel, overall weight: 1,600 kg, Zeppelin-Metallwerke emergency power generator EA 1.8-2x2.5 KVA, 2 system-separated gensets, diesel driven, 1x 1553 operating hours, 1x 1135 operating hours, total weight 1600 kg, on 1-axle chassis with truck towing device, Psdpfxstvzkls Ah Aerc Crane loadable, Video (in running condition) available, German registration, operating hours according to display Vehicle is preferably sold to traders or export, private with reservation Sale without warranty The above information is non-binding, subject to errors/changes and prior sale!

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Psdpfx Ahjwc Ri Io Aerc The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: used, functionality: fully functional, Height: 150 mm Total width: 640 mm Mounting width: 600 mm Thickness: 5 mm Condition: Used / fully functional Function test: OK Predpfx Ajw Uk E Eeh Aoc

Condition: new, Year of construction: 2024, stock item immediately available consisting of: ᐳ Stop rail 3 m long Prodpjfnp Swjfx Ah Ajc ᐳ 2 complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The scope of delivery does not include the wooden base strip 50 x 45 mm onto which the stop rail is screwed.

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device -Manufacturer: Dold, safety relay undervoltage relay -Type: AA 9943.12 Podpfow A Ix Tox Ah Asrc -Number: 1x relay available -Dimensions: 115/45/H80 mm -Weight: 0.3 kg

Condition: like new (used), Year of construction: 2009, Stop system with handwheel and optical decimal display via magnifying glass, 3,000 mm measuring length as new / showroom piece The TOPROL-3 stop system is a convenient length measurement system. The system has been developed for use on aluminum circular saws. The readout is provided via a measuring tape with a magnifying glass. Length is set manually using a hand crank, and the stop carriage is manually clamped. The system comes complete with roller conveyor (plastic rollers) and has a standard measuring length of 3 meters. - Specific information: • Mounting on the "right" side of the machine, measurement increases from "left" to "right" • Total length 3,650 mm • Support width 190 mm • Travel distance 3,000 mm • Number of rollers: 7 support rollers and 7 vertical rollers • Weight: 65 kg - Technical details: Psdpfjw Suzxex Ah Ajrc • Precise length adjustment thanks to magnifying glass • Plastic rollers ø 50 mm, width 190 mm • Vertical rollers ø 50 mm, height 140 mm • Load capacity up to 70 kg per meter • Positioning accuracy +/- 0.1 mm • Manual clamping • Support height from 940 to 1,050 mm • Stop arm can be folded up manually

Year of construction: 1970, operating hours: 1,433 h, condition: excellent (used), For sale is an emergency generator from MWM with 250KVA The emergency generator runs on diesel. The complete genset stands in a 20-foot container The emergency power generator has 1433std. kVA250 Prjdoua Ai Dspfx Ah Ajc Weight approx. 9000 kg Dimensions 6100x2450x2600 mm

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Psdpfxewc Rk Es Ah Asrc Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, The equipment is housed in a steel protective frame with a transparent cover and doors secured with a locking pin. It is equipped with an electric motor (Celma Indukta 3~ 3SIE132M6B (IE3) – 5.5 kW), a Satis STB-22 weighing indicator with relays and scale, and an electrical cabinet with control buttons (START, STOP, emergency stop). Technical condition: • The device comes from a decommissioned production line. • It shows normal signs of wear (visible on the housing and base). • Sold as used equipment, without warranty – suitable for further use or for parts. Specifications and features: • Guide rail allowing height adjustment of the mixer • Operator safety features: Plexiglass shield + metal mesh • Satis STB-22 weighing indicator (data transfer via RS232 to a PC or printer possible) • Emergency safety switch • High-power electric motor Celma Indukta 3~ 3SIE132M6B (IE3) – 5.5 kW • Hoses and cables Pjdsxftyrspfx Ah Ajrc This equipment is ideal for companies involved in mixing, testing, upgrading, or for spare parts. Personal collection or shipping possible after prior arrangement.

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Prodei Nthqspfx Ah Ajc Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: good (used), Try square, locksmith square, hair square, precision hair square, control square Prjdpfx Aow A Inzeh Ajc -Manufacturer: Hommel, stop angle DIN 875/0 -Type: 600 x 400 mm -Accuracy level: 0 -Dimensions: 615/400/55 mm -Weight: 6.6 kg

Year of construction: 2015, condition: excellent (used), Used stop system with handwheel and digital display, 3,000 mm measuring length Lightly used, top condition The TMDG stop system is an efficient and convenient length measuring system. The system was specifically developed for use with our aluminium circular saws. The measurement is displayed via an easy-to-read display. The length is set manually using a handwheel, and the stop carriage is clamped manually. The system comes complete with a roller conveyor (plastic rollers)! - Specific information: Podjw Suxdopfx Ah Asrc • Mounted "left" on the machine, measurements increasing from "right" to "left". • Total length: 3,500 mm • Support width: 300 mm • Travel distance: 3,000 mm • Number of rollers: 11 pcs • Weight: 95 kg • Heavy-duty support feet - Technical data: • Plastic rollers, ø 40 mm, width 300 mm • Load capacity: up to 70 kg per meter • Positioning accuracy: +/- 0.1 mm • Support height adjustable from 800 to 1,050 mm • User-friendly control panel • Stop arm can be manually folded up • Length measurement via electronic magnetic tape

Condition: used, New: No Empty weight: 11 kg Pjdpfx Aophpt Sjh Aorc Working condition.. No guarantee. Please contact us if you can't find what you are looking for.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Prsdpfswc Afhsx Ah Asc Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg Psdpfxotv Rf Uj Ah Asrc - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: good (used), Length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various processing options -Max. stop length: 500 mm Psdpfewyu Ntex Ah Ajrc -Shaft: Ø 25 mm -Dimensions: 700/100/H110 mm -Weight: 3.6 kg

Condition: used, New: No Empty weight: 2 kg Prjdennz Ecspfx Ah Asc Not tested. No guarantee. Please contact us if you can't find what you are looking for.