Used Engel Victory for sale (224)

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Guedsv Extzspfx Apyoi

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) Gujdszlgi Hspfx Apyji • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Condition: excellent (used), Year of construction: 1997, Engel ES 330/90 HL Year of manufacture: 1997 Gedpfx Apsxt S Tyeyeui Screw diameter: 35 mm

Condition: excellent (used), Year of construction: 2016, Conveyor belts Engel Year of manufacture approx. 2016 Length: 2.6 meters Width: 0.90 meters Height: 1.0 meter Gusdpsi Hc E Nefx Apyei

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ SM ID: 300.30 Asset No.: A1998.016 Clamping force: 200 t Serial No.: 33813 Year of manufacture: 1998 Control system: CC 100 Screw diameter: 55 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Gsdpfoztafdox Apyjui Quick clamp: Yes

Condition: excellent (used), Year of construction: 1999, Engel ES 1050/175 HL-V, clamping force 175 tons, year 1999, screw diameter 55 mm, injection volume 510 cm³, shot weight 459 g, enlarged clamping platen 820x750, CC100 control system. Guodpfoxu Rkyex Apysi

Condition: excellent (used), Year of construction: 1999, Engel ES 4450/600HL Clamping force 600 t Year of manufacture 1999 Guodpfx Apsxxcyuoysi Screw diameter 90 mm PVC cylinder with additional screw For PP, PE, etc. Injection volume 2480 cm³ Clamping plate size (horiz./vert.): 1480x1300 mm Minimum mold installation height 500 mm

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Gedpfx Apjtuncvoyeui Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 *

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Clamping force 650 t Clamping force up to 725 t Year 1996 Tie bar distance 102.5 x 92.5 cm Screw diameter 90 mm Gusdpfxjxvmmys Apyoi Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: good (used), Year of construction: 1999, screw diameter: 30 mm, Engel injection molding cylinder Gjdezfq Iaepfx Apyjui Nozzle diameter 30mm Aggregate 200 Year of manufacture 1999

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Gusdpfx Apszu R Hzoysi

Condition: excellent (used), Year of construction: 1995, Engel ES 650/100HL Clamping force 100 t Year of manufacture 1995 Gedoxu Ri Aspfx Apyoui Screw diameter 45 mm EC 88 Platen dimensions HxW 740 x 520 mm

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP Gusdpfx Apjigrinoyei 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: as good as new (ex-display), Engel Robot Drive, Robot Drive Module, Servo Drive Controller, Used Machine Manufacturer: Sigmatek (Engel) Model: Robotdrive M3-1 Year of Manufacture: 2018 Nominal Input Power: 4 kW Communication Interface: EtherCAT (high-speed industrial fieldbus system) Mains Input: 3 × 380–480 V AC, 50/60 Hz Output Voltage: 560 VAC Output Frequency: 0–8000 Hz Nominal Output Current per Axis (at 45 °C): Axis 1: 5 / 10 A Axis 2: 10 / 20 A Axis 3: 10 / 20 A Godpjzmyrwjfx Apyjui Overall Dimensions: Width: 390 mm Depth: 210 mm Height: 190 mm

Condition: excellent (used), Year of construction: 1999, Engel ES 1350/250 HLST Clamping force 250 tons Screw diameter 70 mm Guedowyw Ixjpfx Apyoi Injection volume 1000 cm3 901 g Year of manufacture 1999 Enlarged clamping platen 1050x900

Condition: excellent (used), ROTARY TABLE D1100 2STAT – with VC400 rotary unit Additional specifications: Gjdoz Rxf Aepfx Apyoui Max. load: 2.5 t The weight of the rotary unit, including the hydraulic manifold, is approx. 2,000 kg.

Condition: ready for operation (used), Year of construction: 2001, Engel ES 200/75 HL Closing 75 tons Gjdpsvzhmiofx Apyoui Year 2001 Scrow 35 mm

Condition: excellent (used), Year of construction: 1999, Engel ES 80/20 HL Clamping force: 20 tons Year of manufacture: 1999 Screw diameter: 22 mm Displacement: 38 cm³ Enlarged clamping plate 550 x 430 Guedpelq Hyqjfx Apyji

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp) Gedpeyuc Urefx Apyjui

Condition: excellent (used), Engel CC100 complete control. Tested in our facilities and in good working order. Gujdeuaf D Djpfx Apyoi

Condition: excellent (used), Year of construction: 1999, Angel ES 750/150 HL Gusdpfxsvhcc Ss Apyji Year 1999 Closing 150 tons Scrow 50 mm Injection weight: 353 g Enlarged clamping plate 820x750 mm

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Gjdpfx Ajpdr Aiepyoui Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Godpfxovcrqno Apyjui Closing 80 tons Year 1998 Scrow 35 mm Spray softened 140 g

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Gusdpfevlangex Apyei Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW Gedpsx Nr H Ijfx Apysui • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported