Used Evaporator for sale (402)

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Dkedpfjyh Na Esx Apmjw

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg. Djdpfsqrpd Sex Apmskw

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator Dsdpfx Aszvllbjpmskw 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. Djdpfoz D Efnsx Apmskw (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Dksdpfoxn Uq Dex Apmow

Condition: good (used), Year of construction: 2021, Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant Dkjdjuliazspfx Apmsw

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger. Thermal-Pak II Heat Exchanger EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity. Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint. The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature. CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity. Available in type 304 SS or type 316 SS construction. Drift eliminators Limit drift rate to no more than 0.001% of the recirculated water flow rate. Minimize the risk of Legionella spread. Constructed with an inert polyvinyl chloride (PVC). Superior air inlet louvers and screen design. Constructed with an inert polyvinyl chloride (PVC). Two-tier design that minimizes drift loss and the potential for algae growth in the tower. Framed in steel in easily removable sections. Pressurized water distribution system EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry. ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate. Mounted in corrosion-resistant PVC water distribution piping with threaded end caps. Provides unparalleled heat exchanger coverage and scale prevention. Stainless Steel Water Basin Available in type 304 or type 316 stainless steel. Covers the entire area of the water basin, including the supporting columns and the frame of the louvers. Welded water basin seams for leak-free operation. Stainless Steel Housing and Fan Dsdpfx Apj Ag Id Tjmskw Available in type 304 or type 316 stainless steel. Covers the entire upper section, including the fan shroud. Stainless Steel Thermal-Pak II Heat Exchanger Available in type 304 or type 316 stainless steel. The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Dedpfxexzh Ivs Apmokw

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Dkodjyvrwtepfx Apmsw Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Year of construction: 2005, condition: used, functionality: fully functional, Evaporation station for apple concentrate with an input juice capacity of 24,000 liters Dkjdpfxjxn Ugfe Apmsw

Condition: good (used), Morgana PC42 Evaporator Dsdpfjqqhinox Apmokw Twin fan, ceiling mounted

Condition: used, functionality: fully functional, overall weight: 293 kg, volume flow: 369 m³/h, LGL double flux Evaporator for Coldstores Rated capacity at 0C°/-10C°= 50 KW 5 x fans 450 mm diam.,4 pole Tube content: 49L Fin spacing: 7mm Coils anticorrosion treated w. blygold Djdoztbypepfx Apmokw

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Dkjdpfx Apeynkbmjmow Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134 a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Dksdpfx Apozz Rfqomow Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Dkedpfx Apsrlk Dcsmew

Condition: used, Year of construction: 2007, Used Kuba SGL 56-F62 evaporator on Freon with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 15.800 m³/h. Dodpfx Asrlk Dkopmjkw

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Dkjdpfx Aoyvrtuopmsw Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Djdpforlk Dgox Apmekw

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Dksdezvdftjpfx Apmjw

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Dkedpev Ua Uxsfx Apmew

Condition: used, Used Helpman LEX 22 evaporator on Freon with electric defrost. Complete with 2 ATB RFT0,25/4-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 9.320 m³/h. Dkjdpfx Ajrlk Dyopmew

Condition: as good as new (ex-display), Güntner 4-Fan Industrial Air Cooler / Evaporator (GASC RX 031.1/4), Used Equipment Technical Data: Manufacturer: Güntner GmbH & Co. KG (Germany) Type: GASC RX 031.1/4-40.A-1823671 Serial No.: 501004159/45.00885 Year of Manufacture: 2015 Internal Volume (V): 7.5 litres Maximum Permissible Pressure (PS): 32 bar Permissible Min./Max. Temperature (TS): -50 °C / +100 °C Test Pressure (PT): 35.2 bar (Compressed Air Test) Number of Fans: 4 Features: Attractive, clean condition with a white powder-coated casing Quiet, energy-efficient fans equipped with protective grilles High operating pressure limit of 32 bar and excellent heat transfer performance Space-saving, low-profile design suitable for ceiling or side-wall mounting Overall Dimensions: Width: 3110 mm Depth: 680 mm Height: 510 mm Installation Dimensions: Width: 3000 mm Depth: 560 mm Height: 370 mm Dedpfo Ahqqaox Apmjkw

Condition: as good as new (ex-display), Air Cooler / Evaporator, Güntner GASC RX 031.1/4-40, Used Equipment Technical Data: Air Cooler / Evaporator (Güntner GmbH & Co. KG): Manufacturer: Güntner GmbH & Co. KG Type: GASC RX 031.1/4-40.A-1823671 Year of Manufacture: 2015 (Test Date: 13/11/2015) Internal Volume: 7.5 litres Maximum Permissible Pressure (PS): 32 bar Test Pressure (PT): 35.2 bar (Compressed Air) Permissible Medium Temperature Range (TS): -50 °C to +100 °C Factory Serial No.: 501003481/46.02009 Fans and Features: Number of Fans: 4 quiet industrial fans Dksdpfx Apj Ahqx Temow Flat design intended for ceiling installation Uniform airflow and optimal heat dissipation in refrigerated spaces Overall Dimensions: Width: 3110 mm Depth: 680 mm Height: 550 mm Installation Dimensions: Width: 3000 mm Depth: 580 mm Height: 380 mm

Condition: as good as new (ex-display), Güntner 4-Fan Industrial Air Cooler / Evaporator (GASC RX 031.1/4, 32 bar, 2015), Used Equipment Dkodo Ahqpvspfx Apmew Technical Data: Manufacturer: Güntner GmbH & Co. KG (Germany) Type: GASC RX 031.1/4-40.A-1823671 Serial No.: 501004160/45.00886 Year of Manufacture: 2015 Internal Volume (V): 7.5 litres Maximum Permissible Pressure (PS): 32 bar Permissible Min./Max. Temperature (TS): -50 °C / +100 °C Test Pressure (PT): 35.2 bar (Compressed Air Test) Number of Fans: 4 Features: Attractive, clean condition with a white powder-coated casing Quiet, energy-efficient fans equipped with protective grilles High operating pressure limit of 32 bar and excellent heat transfer performance Space-saving, low-profile design suitable for ceiling or side-wall mounting Overall Dimensions: Width: 3110 mm Depth: 680 mm Height: 510 mm Installation Dimensions: Width: 3000 mm Depth: 560 mm Height: 370 mm

Condition: excellent (used), functionality: fully functional, LU-VE mod EAV8s 7221 H/V for cooling media glycol / water fluid R134A-R404A 4x fans. Dksdpfxoz I S Rfj Apmjw