Used Evaporator for sale (396)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) Dwodpfjzg Dx Usx Aizod - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm Dsdey Endzjpfx Aizowd -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Dwedpjzdknqofx Aizod

Condition: used, Evaporator Alfa Laval -Type: THOR-Z 326-10 -Cooling capacity for R404A: 18 kW at DT8, 15 kW at DT7 -Fin spinning: 10 mm Dwedpfxjzxzibo Aized -Fans: 2 x 500 mm -Dimensions: 2050 x 2200 x 1000 mm -Capacity: 40 l -Weight: 160 kg -Stock quantity: 4 -Condition: used in very good condition

Condition: used, Evaporator Alfa Laval Djdpfszxzgtox Aizewd -Type: THOR-Z 336-10 -Cooling capacity for R404A: 27 kW at DT8, 23.5 kW at DT7 -Fin spinning: 10 mm -Fans: 2 x 500 mm -Dimensions: 2900 x 1900 x 1150 mm -Capacity: 56 l -Weight: 222 kg -Stock quantity: 4 -Condition: used in very good condition

Condition: used, Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm Dwodpfx Aiozaz U Ijzed -Dimensions: 3500 x 1060 x 970 mm -Electric defrost -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work Dwjdpoza D Ukofx Aizjd

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. Dwedpfx Aiozivkbszsd The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Wiegand Year of manufacture: 2001 Infeed capacity: up to 40,000 kg/h Water evaporation rate: approx. 10,000 kg/h Steam compressor Dwedpozzyuuefx Aized - Manufacturer: PILLER - Motor power: 200 kW - New motor installed in 2017 - Includes a new spare motor Previously used for whey processing Control system not included Without preheating (heat exchanger) Condition: very good, fully functional

Condition: used, Evaporator Goedhart -Type: VNS 65407 E -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L Dwodpfx Aisyybd Dezjd -Weight: 310 kg -Quantity in stock: 9 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Dsdpfx Aisyr H Anszowd Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality). Dwjdpfxjxqq Dxe Aizsd

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m Dodpfx Ajzfx Dvoizjwd (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration.

Condition: used, Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm Dwodsy Ifb Nopfx Aizod -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, This listing is for the Formonia Formaflow VVAP1/at Vaporiser System The unit is in full working condition and is ready for immediate use Foramaflow VAP1a/T Formalin Vaporizer Overview: Purpose: Safe and easy formalin fumigation for ducted safety cabinets. Design: Can be mounted externally or placed inside the cabinet before sealing. Capacity: 120ml solution capacity. Automation: On-delay timer for delayed start. Automatic cut-off switches off heating once the solution has evaporated. Power Supply: 230V. Construction: Lightweight (2.5kg). Dodexhgdcjpfx Aizjwd Stainless steel body with powder-coated, chemical-resistant matte black finish. 55mm discharge tube angled upward by 1°. Safety: Designed for fully automated and safe overnight fumigation

Condition: used, maximum load weight: 30,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2016, loading space length: 13,800 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Schmitz 3-Compartment Freezer Trailer (Vehicle No. 952) First registered: 30.11.2016 Permissible gross vehicle weight: 39,000 kg Unladen weight: 9,850 kg Payload: 30,150 kg MOT valid until: 04/2026, next inspection due: 10/2026 Overall length: 14,000 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length: approx. 13,700 mm Internal width: approx. 2,500 mm Internal height: approx. 2,500 mm Compartment 1, front, driver's side, approx. 7,000 mm long x 1,650 mm wide x 2,500 mm high with top-hinged sectional door Compartment 2, front, passenger side, approx. 7,000 mm long x 850 mm wide x 2,500 mm high with top-hinged sectional door, 1 compartment spanning the entire width in front ZEPRO 3,000 kg tail lift Refrigeration unit: Vector 1950 MT City 2 evaporators at the front 5,000 diesel operating hours 2,900 electrical operating hours 2 x 12-ton, 2-speed winch WABCO ABS Air suspension with raising and lowering function Schmitz coupling Dwodpfx Ao Aibznsized 1st axle: lift axle Tires: 385/55R22.5, 1st tire approx. 50/30%, 2nd tire approx. 40/80%, 3rd tire approx. 80/90% 3rd axle: steering axle 1 pair of LED work lights on the side behind the 3rd axle, left and right 3 x LED reversing lights Price: €13,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties for disputes up to €5,000.00 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, This listing is for a Thermo Scieintific Savant SPD121P SpeedVac Vacuum Concentrator. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Savant SPD121P SpeedVac Vacuum Concentrator is an advanced centrifugal evaporator designed to efficiently remove solvents and concentrate samples while preserving their integrity. Here’s a closer look at its features, specifications, and applications: Key Features: PTFE-Coated Chamber: The deep aluminium chamber is coated with PTFE, offering high durability and corrosion resistance, making it ideal for handling a variety of solvents. The built-in vacuum gauge provides real-time monitoring of vacuum levels, ensuring precise control during the evaporation process. User-Friendly Time/Temperature Controls: Equipped with a membrane touch pad for easy programming, allowing users to easily set time and temperature parameters. Variable Drying Times: Drying temperatures can be adjusted from 35°C to 80°C in 5°C increments, giving users flexibility for different types of samples. Endpoint Mode: This feature automatically terminates the process when a pre-set vacuum level is reached, ensuring consistent concentration results. Glass Safety Lids: Standard glass lids improve drying efficiency by applying radiant IR heat to samples, accelerating the evaporation process. Chemical Trap Kit: Comes with disposable cartridges equipped with colour indicators to trap acids and water vapour, safeguarding the vacuum system from contamination. Tubing and Fitting Kit: Includes 4 feet of clear, thick-walled vacuum tubing, two clamps, and a cutter, making setup straightforward and allowing for immediate use. Applications: Djdpfx Aioxxz H Tozswd Removing Ethyl Acetate: Widely used for evaporating ethyl acetate from samples, which is crucial in applications such as CAT assays and analysing drug metabolites from solid phase extracts. Biomolecular Research: Ideal for concentrating samples in aqueous and mild organic solvents, facilitating research in biomolecular studies where precise sample preparation is necessary.

Condition: used, This listing is for the Julabo FL601 Recirculating Cooler/Chiller The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Dwjdpfxoxhf A De Aizsd Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support

Condition: used, functionality: fully functional, machine/vehicle number: 7FGJF35 13364, Year of construction: 2006, operating hours: 9,793 h, load capacity: 3,500 kg, lifting height: 4,000 mm, load center: 500 mm, fuel type: gas, mast type: duplex, power: 38 kW (51.67 HP), fork length: 2,000 mm, empty load weight: 4,980 kg, color: red, Equipment: UVV, lighting, sideshift, We are offering this used Toyota 02-7FGJF35 forklift, manufactured in 2006, for sale. Various components have been replaced on the unit, including the evaporator, starter battery, hydraulic hose, and front left brake. All necessary repairs have been completed. Please refer to the attached delivery notes from the service provider. A full gas cylinder is included with the forklift. The paintwork has some minor imperfections, and the seat is slightly damaged. Please refer to the pictures for an overall assessment of the condition. Dwodpfxszcbute Aizod The UVV (occupational safety) and ASU (technical inspection) will be renewed on June 18, 2026. Please see the image.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Dwodpfxozvxxno Aizsd Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2003, functionality: fully functional, power of vacuum pump: 4,000 W, type of input current: AC, total length: 2,200 mm, total height: 2,145 mm, volume flow: 250 m³/h, total width: 1,140 mm, overall weight: 1,300 kg, We offer used Balzers BAK 760 physical vacuum deposition system, year of construction/refurbishing 2003. Year of major upgrade 2010. It is completely functional system for vacuum deposition of various optical materials on glass or other substrates. Elements of system are: - Vacuum chamber BAK 760 (760 mm maximum internal size) - Completely automatic deposition process, based on Windows real time software. - All process control system elements based on Profibus input/output modules. - 2x E-gun, max 10kW power, with 2 shutters - 2x Thermal evaporator, with 2 shutters - Knudsen planetarium system with 3 arms, increases deposition capacity >2x, increases homogeneity of deposition - Upgrade - ion assisted deposition system (2010) for denser layers Djdpoz Tdlgofx Aizowd - Two low vacuum pumps (Edwards 250 m3/h roots - main, Balzers 170 m3/h - backup) - Cold and warm water circuits included - Glass substrate cleaning machine based on Miele laboratory glass cleaning device included. Cleaning system is high productivity and low work force requirement process. Capacity of one batch (75 minutes process time) of 100 x 50 mm substrates = 320 pcs. - Water purification system. 2 stage system. Stage 1. with simple regeneration process (salt). Stage 2. ion-exchange - external service regeneration. Good for >100 cleaning cycles. - RGA 200 - residual gas analyzer, from Stanford research included (for analyzing vacuum gases and leakages) - Number of stainless steel glass cleaning adjustable cassettes for substrates 25 x 25 mm to 120 x 100 mm and few for even larger substrates included. - And a lot of various tools, spare parts and consumables. All of above is preferably sold as fully functional system. Transfer to your site is demanding process and requires careful dismantling and setup on new location. Company setting up system on our production site can probably help with setup and testing on new site. Visits to current site of equipment highly is recommended and test of equipment on your process welcomed. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU). Dwodpfx Aioygyd Iezed

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. Dwedpsz Iy Hzsfx Aizod 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: used, NEOS PA Range Ventilated negative temperature refrigeration Temperature range: -20 to -10 °C Power supply: 230 V single-phase 50 Hz Power consumption: 580 / 840 W Refrigerating capacity: 600 W Volume: 486 L Capacity: 20 trays 600 × 400 mm 1 full door with automatic closure Interior: AISI 304 stainless steel Cabinet / door insulation: 75 / 65 mm Adjustable stainless steel legs: 120 to 150 mm Refrigerant: R290 Dodo Agu D Nspfx Aizowd Hot gas defrosting: 4 cycles / 24 h External dimensions (W × D × H): 790 × 820 × 2025 mm Internal dimensions (W × D × H): 640 × 682.5 × 1440 mm Weight: 140 kg The ILSA NEOS PA AN64S2510 negative temperature pastry cabinet is designed to store pastries at temperatures between -20 and -10 °C. Suitable for 600 × 400 mm trays, it combines ventilated refrigeration, a full door, and a gross capacity of 630 L, or 486 L net. What sets this model apart This version features an exterior coating of PPS on steel and an interior of AISI 304 stainless steel. The 20 pairs of stainless steel slides included as standard organize the storage of the trays. The tropicalized monoblock refrigeration unit ensures rear-ducted airflow within the compartment. Key benefits Tiered storage for 600 × 400 mm trays Ventilated refrigeration with rear-ducted airflow Automatic defrosting with hot gas Automatic condensate evaporation Rounded interior corners for easy cleaning Full door with automatic closure and standard lock Adjustable stainless steel legs for leveling

Condition: used, empty load weight: 7,580 kg, maximum load weight: 10,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2017, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, loading space volume: 45 m³, total length: 7,350 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: white, Year of construction: 2017, operating hours: 272,256 h, mileage: 272,256 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference no. for inquiries: 41375 Schmitz, ZKO 18 * Year of manufacture: 2017 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Tandem trailer * Fixed roof * Load securing certificate DIN EN 12642 Code XL * Duomatic air coupling * 15-pole connection plug * Lifting and lowering device * Galvanized * Temperature recorder * Aluminum floor * Bi-temperature with evaporator/partition * Cooling unit Thermoking * Diesel + Electric Djdpfx Aj Aiau Hjizewd * Mitsubishi cooling unit * Rear supports * Suspension: Air * Permissible total weight: 18,000 kg * Unladen weight: 7,580 kg * Payload: 10,420 kg * Tire condition, 1st axle: 40% - 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% - 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 7350 mm, W = 2500 mm, H = 2450 mm * Internal volume*: 45 m³ * Pallet spaces: 18 * Bottom-mounted, 50 mm eyelet * Tail lift: Dhollandia DHLM 30, lifting capacity: 2000 kg * Cooling system: not functional Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.