Used Extruder Sheeter for sale (524)

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning Nwsdpozqt Dnefx Abuon • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling Nwsdpfezn Um Ejx Abuon The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Nodpfx Abey Tk Tneuown Width: 450 mm Diameter: 80 mm Weight: 2.6 kg Condition: good, second-hand

Condition: good (used), Year of construction: 1999, functionality: fully functional, MPS EP 330-5 Year of manufacture: 1999 Machine configuration: • 5 flexographic printing units • Laminating unit • Die-cutting unit • Sheeter unit • Web width: 330 mm • Inline printing and converting process • Suitable for paper and label-related converting applications Nwedpfx Absy N Tk Ueujn Application and Advantages The MPS EP is a compact and versatile flexographic printing and converting machine. With integrated laminating, die-cutting, and sheeting units, this machine enables the processing of roll materials into individual sheets or pieces in a single workflow. Possible applications: • Paper converting • Roll-to-sheet production • Roll-to-piece production • Flexographic printing • Laminating • Die-cutting • Sheet delivery after converting • Inline production of printed and finished products Main benefits: • Printing, laminating, die-cutting, and sheeting in one production line • Reduced handling compared to separate offline processes • Flexible use for various converting applications • Attractive solution for customers seeking a compact machine with inline finishing • MPS is a reputable manufacturer in the label and narrow-web printing sector

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Nwjdpfozu Nf Asx Abuon Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Nedpezr Hz Ajfx Abuown Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: excellent (used), 497 USED Shop oven, electric Miwe Aeromat AE 8.0604. EXTERNAL DIMENSIONS (in cm): - W: 90 - L: 100 - H: 191 TECHNICAL DATA: - 8 levels for 60x40 cm baking sheets Njdpfx Ajzrr Ubebuown - power supply: 400V 50Hz - power: 15,4 kW EQUIPMENT: - steaming Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2005, 498 USED Shop oven, electric Miwe Aeromat AE 8.0604. EXTERNAL DIMENSIONS (in cm): - W: 90 - L: 100 - H: 190 TECHNICAL DATA: - year of production: 2005 - 8 levels for 60x40 cm baking sheets - power supply: 400V 50Hz - power: 15,4 kW EQUIPMENT: - steaming Paid options available: transport. The price is a net price. Nodpfx Aszrr Uzsbuswn Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2018, 502 USED Shop oven, electric Miwe Backcombi. The oven consists of two modules: Miwe Condo CO 0806 and Miwe Aeromat AE 4.0604. EXTERNAL DIMENSIONS (in cm): - W: 110 - L: 123 (145 with hood) - H: 225 TECHNICAL DATA: - year of production: 2018 - Miwe Condo: 2 baking chambers for 60x80 sheets, height 14cm - Miwe Aeromat: 4 levels for 60x40 sheets - power supply: 400V 50Hz - power: 20,4 kW EQUIPMENT: - hood - steaming Paid options available: transport. The price is a net price. Nwedpozrt Tfofx Abujn Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) Nwsdpfx Abszkttcjuen _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN 2 CHAMBERS UNDERWATER VACUUM CALIBRATION TANK V-32-2-3, 3 meters long 2-chamber tank with 2 bypass filters Year of manufacture 2004 Without spraying / Full immersion calibration tank Nwjdpjyc E Nnjfx Abuon Electric feed, forward and reverse

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Nwedpfsvbvznsx Abusn The machine is my property.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2000, power: 315 kW (428.28 HP), overall weight: 3,000 kg, input voltage: 400 V, type of input current: three-phase, machine/vehicle number: Expander Typ OEE 23,2 315KW, Used expander/extruder, versatile, can be used with both hydraulic counterpressure slide and dies (shaping e.g. for animal feed) Machine was purchased, unfortunately cannot be used because our power connection is not sufficient. Available: expander extruder with gear and drive, hydraulic slide (cone not plate), rotary knife and various dies, hydraulic unit with oil cooler. If required, the associated belt dryer is also available. Nedpfx Abevlwchsuewn Please send inquiries by email, thank you.

Year of construction: 1997, condition: used, Twin-track saw/combination BASTON/VOBAU Year of manufacture 1997 Njdpsyl I Ekefx Abuewn Model GB 1070 A Tracks in very good condition Very robust trigger

Condition: excellent (used), Year of construction: 2009, 063 USED Spiral cooling and proofing system – 2 stainless steel spirals for proofing and cooling. Device without freezing units and without electrical installation. TECHNICAL DATA: - capacity: approx. 800 kg/h - total system length: approx. 13 m - width: 6 m - spiral diameter: 5 m Refrigerant: R 404A Njdpjwa Aa Tsfx Abujwn Equipment manufacturers: Hafner-Muschler, Bitzer, Deep-Blue The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, deck ovens, confectionery ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, croissant machines. We invite You to check all our ads.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Nwjdpjv Tadwofx Abuon Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. SPEED VARIATOR WITH INVERTER

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others Nwjdpfx Absv Iflpjuon • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm Nedpfexwnb Iox Abuewn No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Condition: good (used), 082 USED Rolling machine, croissant machine, baguette machine. Automatic machine with control panel. EXTERNAL DIMENSIONS (in cm.): - height 140 (max: 150), - width 120 - length: 195, - left wing: 84/63 - right wing: 74/64 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Nwsdowgcwrepfx Abujn Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2025, 134 NEW Rondo Dough Roller - Tabletop Dough Roller TECHNICAL DATA: - Foldable stainless steel arms, - Roller opening 0.3 – 30 mm, - Motorized conveyor belts, - Roller diameter 84 mm, - Easy-to-read scale with dough thickness switch, - Roller length 500 mm, - Scrapers can be removed without any tools, - Outfeed belt speed 50 cm/sec, - Separate start and stop buttons. Dimensions (in operation): 1560 x 965 x 500 mm, - Safety guards. Dimensions (in standby): 810 x 965 x 710 mm, - Finger guards. Power: 0.75 kVA, - Easy-to-clean cotton belts, - Flour container, - Power supply: 3 x 200 – 460 V. 50/60 Hz, - Weight: 80 kg, EXTERNAL DIMENSIONS (in cm) - Length: 156, - Width: 96.5, - Height: 50. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Nwsdoxbdy Iopfx Abusn Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h Nwodpfxowz Ntij Abuon

Condition: good (used), 144 USED Seewer Rondo rolling, rounding, lengthening, and bagging machine. EXTERNAL DIMENSIONS (in cm): - height 170, - width 115, - length: 215, - wing 1x: 108/62, Nedpfx Aboxdkbqeuswn - wing 1x: 75/62, - wing 1x: 114/62. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Nedpfx Aswg R Rtebuewn

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Nwjdpfx Absy Rq Hisuon Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Location on request! Collection or transport can be arranged.

Condition: excellent (used), Year of construction: 2005, 092 USED Miwe Thermo-Express thermo-oil deck ovens + Athlet loading system. EQUIPMENT: - 3 Miwe 6.1820 deck ovens (chamber dimensions 180x200 cm, total baking area: 66 m²) - Miwe Athlet loading and unloading system - manual loaders with trolleys (approx. 10 trolleys) - heating boiler 412 kW - post-baking steaming - bread collection conveyor belt, approx. 11 m - bread discharge onto the table EXTERNAL DIMENSIONS OF THE ENTIRE SET (in cm): - width: 820 cm - depth: 800 cm - depth to the gate: 1000 Nwodpfx Aszx Hfusbuen - height 350 - conveyor belt length after baking: approx. 1100 + bread discharge Year of production: 2005 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.