Used Extrusion Plant for sale (3,545)

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Mobile jaw crusher on a tracked chassis The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Ledpfxjhd I U Eo Ab Neah Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 997307957, Gasparin Jaw Crusher GI118C OLIMPO mobile jaw crusher on crawler tracks The sheer performance that the OLIMPO delivers, thanks to the 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling operations. Laodpfxohd Nabe Ab Njh This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stress. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly offers convincing and unparalleled performance in applications involving natural stone, recycling, and rentals. Production output: approx. 330 tons/hour Patented HCS system Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption by approx. 30%. Optional pre-screen Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to max. operating hours from the start of operation of the plant Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Feed hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Grizzly feeder 970 x 3600 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed 82 hp/60 kW, emission stage V Control panel Crawler tracks 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 180965471, Additional options and accessories Notes: Mobile impact crusher on crawler tracks The K1 impact crusher with crawler tracks, the newest addition to the product range, features an impact mill with a capacity of 250 t/h. It can be equipped with post-screening with recirculation in a closed circuit to perfectly calibrate the end product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Gap setting hydraulically adjustable, even during the crushing process. Quick locking system with wedges and tilting cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year up to a maximum number of operating hours from the start of operation of the plant. Lodpfshd Naijx Ab Noah Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track). Feed hopper, 4 m³ - 1800 x 3700 mm Grizzly feeder, 900 x 3400 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Crawler tracks, 400 x 2900 mm Weight: kg Transport length: 12560 mm Transport width: 2550 mm Transport height: 3200 mm Further information: Intended use: Construction, Overall condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 499957954, Mobile impact crusher Gasparin GI1010CVR K1R on tracked chassis K1R machine with crawler undercarriage, the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. Can be equipped with a downstream screening system with return to the closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Clearance adjustable hydraulically, even during the crushing process. Fast locking system with wedges and pivoting cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing clearance from 30 (20) to 100 mm (clearance adjustment to 20 mm only possible with the 3rd grinding path). Feed hopper, 4 m³ - 1800 x 3700 mm Single-deck vibrating screen, 950 x 1500 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Lasdpfx Abjhd Name Neh Control panel Tracked chassis, 400 x 3310 mm Weight: kg Transport length: 15400 mm Transport width: 2550 mm Transport height: 3300 mm Return system: single-deck screening machine 1200 x 2500 mm. Swiveling discharge conveyor belt under the screening machine for return to the circuit. Two-deck vibrating screen with conveyor belt for fine material. Further information: Intended use: construction industry, general condition: very good, technical condition: very good, optical condition: very good, transport dimensions (L x W x H): 15.4 x 2.55 x 3.3.

Condition: new, Year of construction: 2025, machine/vehicle number: 299477763, Mobile impact crusher on a tracked chassis The K1R impact crusher with crawler tracks is the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. It can be equipped with a downstream screening system with recirculation in a closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also delivers top performance in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Gap setting hydraulically adjustable, even during the crushing process Fast locking system with wedges and pivoting cylinders Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Laedpfohd Naqox Ab Njh Single-deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 15400 mm Transport width: 2550 mm Transport height 3300 mm Closed-circuit system: Single-deck screening machine 1200 x 2500 mm, pivoting discharge conveyor under the screening machine for recirculation into the circuit. Further information Application: Construction, Unladen weight: kg, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 648125409, FRUMECAR MODULMIX 3000 CONCRETE BATCHING PLANT Year: New Capacity: 120 m³/h - 4-5 aggregate hoppers / in-line arrangement - Hopper capacity: 60-120 m³ - Production capacity: 120 m³/h - Mixer type: twin-shaft mixer - Mixer size: 3.0 m³ / 4000 liters - K2 fully automatic computer system - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2-year guarantee from startup - Winter housing possible This offer is subject to change, and may contain input errors or mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. More machines and mixing plants can be found on our website. Further information: Intended use: Construction industry Usable material: Concrete General condition: very good Lajdohd Na Rspfx Ab Nsh Technical condition: very good Optical condition: very good

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Lasdpfx Abeppddyo Njh Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, Concrete mixing plant, Sipe TTM 800 Year of manufacture: 2008 Lasdpfx Abez Ikxhj Neh Mixer: 800 liters / approx. 14 cubic meters per hour Cement silo: 40 tons Scraper with chain for 2 types of gravel Control system: fully automatic with concrete control

Condition: used, Year of construction: 2015, operating hours: 50,000 h, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 60,000 rpm, fuel: domestic gas H, type of cooling: air, nominal power (apparent): 999 kVA, input frequency: 50 Hz, input current: 1,444 A, Equipment: documentation/manual, Used natural gas-fired combined heat and power plant for electricity and industrial steam production. Ljdez I T Ekepfx Ab Noah Main equipment: • Capstone C1000: five C200 microturbine modules, each rated at 200 kW; electrical output of the complete package: 999 kWe; 400 V / 50 Hz; grid-parallel operation; common acoustic enclosure and control system. • APROVIS waste heat steam boiler: rated production of 2,000 kg/h of saturated steam at 6 bar(g); maximum allowable pressure 9 bar(g); equipped with two economizer stages for heat recovery. • Reinhard Simon CKO501G supplementary duct burner: 500 kW, for additional exhaust gas heating upstream of the boiler. • BIO-KOMP fuel gas booster compressor: 30 kW, maximum flow 340 Nm³/h, discharge pressure 6 bar(g). The plant has been regularly maintained under a maintenance contract, with components replaced in accordance with the maintenance schedule. One of the five turbine modules is currently non-operational. Operating hours: T1: 53,191 h; T2: 50,891 h; T3: 51,628 h; T4: 52,691 h; T5: 49,487 h. The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. Technical documentation is available. Inspection, price and collection terms are subject to agreement.

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Lodpozuz H Ssfx Ab Noah Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. Laedpfxoztw Ago Ab Noh TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder

Condition: excellent (used), Möller tilting trays according to plan B, with raised bumps No need for dusting Thanks to special bumps on the trays, the dough pieces cannot stick Lasdpfjghr Nnex Ab Noh Tilting trays, 58.5 x 38.5 x 4.5 cm We still have approximately 200 pieces in stock.

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, We are offering two new Totem 20 combined heat and power (CHP) units, as well as a new Totem 10 CHP unit, manufactured in 2016. Ljdpfx Aboytympo Noah These CHP units are from a warehouse clearance. According to the previous owner, the units are eligible for CHP subsidies, as they have never been installed. However, this must be verified independently. The TOTEM 20 generates a maximum of 20 kW of electricity and 48.5 kW of heat. The TOTEM 10 generates a maximum of 10 kW of electricity and 25.2 kW of heat. Please refer to the uploaded data sheet and operating manual for all other technical specifications. Depending on the location, the CHP units can also be delivered to Germany or Austria. The price for the Totem 10 is €6,000. The price for the Totem 20 is €7,000. The current list price for a new Totem 20 is approximately €57,000 gross, and they are being sold for around €45,000 (see photo). If you have any questions or require further information, please send us a message or call us. We offer a start-up guarantee in the form of a return policy in case of any issues, but we will not cover any costs incurred.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Lsdpfxjz D Ihfj Ab Njah

Condition: new, functionality: fully functional, Copper Granulators Copper Granulators All prices are net prices. - GM-S03: 4,200 Euros - GM-S05: 5,050 Euros - GM-S08: 7,700 Euros - GM-S15: 11,300 Euros Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Image 1 – Cable recycling plants Professional cable recycling machine GM-T500 High-quality system for the efficient processing and separation of cable material. Suitable for various types of cables and industrial applications. GM-T500: Copper wire granulator, up to approximately 300–400 kg/h, 34.15 kW Price: 55,640 Euros net Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance sizes. Ideal for recycling operations, cable processing, and industrial applications. Available models as per overview: All prices are net prices. • GM-B200 – 1.5 kW, 400 Nm 3,000 Euros • GM-B300 – 3 kW, 1,628 Nm 4,840 Euros • GM-B400 – 4 kW, 2,919 Nm 6,780 Euros • GM-B500 – 7.5 kW, 4,574 Nm Ledpfx Aez Eil Usb Noah 8,940 Euros • GM-B600 – 11 kW, 8,500 Nm 12,860 Euros • GM-D400 – 2 × 4 kW, 5,800 Nm 8,900 Euros • GM-D500 – 2 × 7.5 kW, 9,148 Nm 12,200 Euros • GM-D600 – 2 × 11 kW, 25,000 Nm 16,520 Euros

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, overall weight: 540 kg, empty load weight: 540 kg, input frequency: 50 Hz, Eberhardt RuLa Universal ST Manual control Machine is mobile and features a locking mechanism Possible weight ranges: Option: 150-1500g / 450-2500 g Lodpfx Aezq U Alsb Njah Simple, robust technology! Connection: 400V, 16A CEE plug Dimensions: 820 x 1000 x 1550 mm (W x D x H) Used machine

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Lasdpfx Abszvh E Ro Noh

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. Ljdpeztc Nfefx Ab Nsah The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: used, Year of construction: 1999, A complete screw manufacturing factory with 8 production lines is available for sale. The facility is designed for the industrial production of wood screws, metric screws, and inch screws. Lsdpsztfvuofx Ab Nsah The factory includes all necessary machinery covering the entire production process – from wire processing and cold forming to thread rolling and finishing operations. A large inventory of spare parts is also included to ensure long-term operation and maintenance of the production lines. Machinery Overview Thread Rolling Machines 1 × Charng Guey CGR510 4 × Hilgeland thread rolling machines (Year 1987–1992) 1 × Hilgeland (Year 1959) 2 × EWM (Year 1986 / 1989) 1 × Malmedi thread rolling machine 1 × Hilgeland Ronsdorf Pointing Machines 6 × ME10 2 × ME12 Cold Heading Machines / Presses 3 × Sacma 31 (Year 1984 / 1985 / 1986) 1 × Sacma 21 (Year 1984) 2 × Klose MTH 250 1 × Omega 122EM 1 × 5-stage press Jern Yao JBF-17B5SL Deburring Machines 2 × AAG12 4 × AAG10 Centrifuges 10 × units Key Advantages Complete screw production facility Production of wood screws, metric screws and inch screws 8 production lines Large spare parts inventory included Ready for industrial mass production Further technical details and inspection available upon request.

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W Lajdsyw I Hmopfx Ab Njh • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Laedpfx Abex Dcdkj Nsh

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Ledpjwd Nw Tefx Ab Neah Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Laedsw N Hk Hepfx Ab Noh

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock! Lodsilh Efopfx Ab Neah

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine Lsdpfxsu Dhkdj Ab Noah e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) for pre-shredding cohesive/clumpy material