Used Falling Film Evaporators for sale (2,026)

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Dkedpfx Alozrlzzs Sju Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net Dedpfx Asyr Aiwol Soku 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: good (used), mileage: 220,352 km, power: 158 kW (214.82 HP), first registration: 07/2017, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 8,400 mm, total width: 2,550 mm, total height: 3,680 mm, loading space length: 6,070 mm, loading space width: 2,370 mm, loading space height: 2,310 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Reversing camera - Lane keeping assist - Fabric - Blind spot sensor Number of axles: 2, Configuration: 4x2, Unladen weight: 8479 kg, Gross vehicle weight: 14000 kg, Total tank capacity: 260 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 158 kW (212 hp), Engine displacement: 5132 cc, Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 8, Power steering, ABS, ASR, Body construction year: 2017, System type: Lamberet, Central locking, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Supra 750 Mt, Refrigeration unit: Diesel/electric, Unit hours / electric: 558, Unit hours / diesel: 3545, Body insulation, Heating, Wall thickness: 55 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Additional evaporator, Tail lift, Tail lift design: Rear door, Tail lift capacity: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 195 x 245, LAMBERET FRIGO BOX // TAILLIFT // CARRIER Transmission Transmission: VOL, 8 gears, Automatic Axle configuration Tire size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Unladen weight: 8,479 kg Payload: 5,521 kg GVW: 14,000 kg Functional Tail lift: Dhollandia, Rear door, 1500 kg Loading platform height: 110 cm Refrigeration unit: Diesel and electric (3545 operating hours diesel; 558 electric) Wall thickness: 55 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Dkedszm Nhzopfx Al Seu Please visit our website for special offers and a complete stock list: Leasing through Kleyn...

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Dsdpfx Aoinwi Hol Seku Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Consumption: approx. 8 KW Dsdpfx Asq Ikhhel Ssku Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, Year of construction: 2026, The ENR series are air-cooled chillers designed for industrial applications and outdoor installation. The ENR 038 features axial fans, scroll compressors, condensers with finned aluminum fins, and a self-cleaning coaxial evaporator for maximum operational reliability. Internal pump, tank, fan control, low-GWP refrigerant R32. Cooling capacity 37 kW, low-GWP refrigerant R32. Credit brokerage and consulting are provided by KREDIT DE AG. Representative example in accordance with § 17 PAngV: Basis for the stated rate (assuming good credit rating): Net loan amount €16,500.00, 7.10% fixed interest rate, 7.20% p.a. effective annual interest rate, 96-month term, total amount €21,674.72, monthly rate €225.78. Dksdpfx Aloz Nvkmj Seu

Condition: used, Year of construction: 2011, Overview This ROBOPAC / SIPA HELIX HS30 ring wrapper, manufactured in 2011, is designed for the automatic stretch wrapping of palletized shrink-packed beverage products. The system was previously part of a complete SIPA palletizing and wrapping line. The SIPA palletizing section has already been sold; therefore, only the ROBOPAC HELIX HS30 pallet wrapping section is still available. The wrapper is a ring-type stretch wrapping machine for stabilizing pallet loads after palletizing. The machine is currently dismantled and reported to be in good technical and working condition. It is available immediately from Serbia. Technical Data - Manufacturer: ROBOPAC - Model / Type: HELIX HS30 Dkodpfx Alezf Ehus Ssu - Machine Type: Automatic ring pallet stretch wrapper - Year of Manufacture: 2011 - Application: Automatic wrapping - Wrapping System: Ring wrapper - Wrapping Material: Stretch film - Operation: Automatic pallet wrapping after palletizing - Previous Line Capacity: approx. 39 pallets/hour, depending on product configuration - Included Components: ROBOPAC HELIX HS30 ring wrapper section - Documentation: Manuals and electrical drawings available - Spare Parts: Not included - Status: Dismantled - Availability: Immediate

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper Dodpfxozb Azfj Al Ssku - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview Dedpfjydkblsx Al Seku This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides.   Technical data  - year of manufacture: 2009 - capacity 60/min  - adjusted formats: 1,5L PET (2x(3x2)) - operation: film only  - application: water, beer, CSD - condition: very good, still connected  Additional information - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available 

Condition: new, Year of construction: 2026, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 Dkedpfx Alotuwf Eo Seu - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal Dedpfx Alow Rrcwj Soku - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: Djdpfx Alsxak Dqo Soku - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction Dkodpfjhp S Trex Al Seu performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd GIC Gainsborough Engineering VFB2000 vertical form-fill-seal (VFFS) bagging machine, designed for automated weighing/bagging and packing of food products and other free-flowing products. Specification: Manufacturer: Gainsborough Engineering Ltd Brand: GIC Model: VFB2000 Type: Vertical Form-Fill-Seal (VFFS) bagging machine Sealing bars: 290 mm horizontal × 320 mm vertical Film reel width: 620 mm Current film width: 280 mm Forming tube: 80 mm diameter Djdozzzfujpfx Al Ssku Suitable for integration with weighing/feed systems Stainless steel/food-processing construction Designed for continuous automatic bag forming, filling and sealing

Condition: used, Year of construction: 2007, lifting height: 5,700 mm, fuel type: electric, Weights Empty weight: 1.510 kg Functional Lifting capacity: 230 kg Working height: 770 cm CE mark: yes Condition Dedpfx Aey A Evpol Soku General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,87x0,76 Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 1930ES Year of build: 2007 Condition: Used Data: Max. working height: 7,70 m Max. platform height: 5,70 m Drive type: Batterie Platform dimensions: 1,86 x 0,74 m Lifting capacity: 230 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 1,87 x 0,76 m Height transport position with railing: 1,97 m Height transport position without railing: 1,15 m Ground clearance: 0,08 m Empty weight: 1.510 kg Special features: white tires, attachment points for fall protection systems (PPE) available, indoor use only. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Dkodpfx Ajz A Tzbol Sou Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Djdjz A Ty Depfx Al Sjku Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Dedoz A T Dcepfx Al Sjku Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Dodpfszvxxnsx Al Sjku Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar Dkodpfx Alsr I S H Es Seu * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: used, mileage: 1,000 km, power: 96 kW (130.52 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,070 kg, wheelbase: 3,498 mm, next inspection (TÜV): 04/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 5.4 m³, loading space length: 2,580 mm, loading space width: 1,590 mm, loading space height: 1,280 mm, construction height: 2,020 mm, working width: 1,956 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, Navigation via smartphone is possible. Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, on-board computer, cruise control, multi-function leather steering wheel, rear parking assist, reversing camera, load compartment partition, spare wheel with road tires, summer tires, light and rain sensor, daytime running lights, LED headlights, fog lights, radio with Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, tire pressure monitoring system, long wheelbase, heat-insulating glass, tachometer, driver airbag, driver and passenger airbags, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, cool box, start/stop function, diesel particulate filter, fully serviced according to maintenance schedule, sliding door cargo/passenger compartment right, immobilizer, exterior temperature display, power steering, paint: GLACIER WHITE, refrigerated delivery vehicle with ALEX refrigeration system up to 0 degrees, in-vehicle cooling with underfloor evaporator, interior filter: pollen filter, double passenger seat, glove compartment with cooling function, adjustable steering column (steering wheel), traction control system (ASR), battery 85 Ah, body/superstructure: long refrigerated box, wheelbase 3498 mm, drive type: front-wheel drive, transmission: 6-speed Dodpfx Alsz Dvkhs Ssku Financing example * Cash price: 42,602.00 Euro * Down payment: 8,520.00 Euro * Term: 60 months * Net loan amount: 34,082.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 39,824.00 Euro * Monthly installment: 664.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as an advisory loan intermediary. Subject to credit approval. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Changes, errors and prior sale reserved. Delivery possible for an additional charge. Export license plates available on-site. We will take your old vehicle in part exchange. Retrofitting of: - Trailer couplings, also up to 3500 kg - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift and other individual solutions for your business needs possible for an additional charge.

Condition: used, Year of construction: 2000, • Max. imaging format: approx. 505 × 525 mm • Max. film width: approx. 530 mm • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 grayscale levels), optionally up to 400 lpi with Delta Technology • Accuracy: ± 0.2 mil (0.005 mm) across the entire image area and with multiple films • Speed: up to approx. 1,320 mm/h film length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100–240 V AC, 47–63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm Djdpfjwv Ea Uex Al Soku • Weight: approx. 250–300 kg • Operation: daylight-loading, exposes film or RC paper, optional CTP plates (polyester)

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings Dedpfx Asz A H Eysl Sjku - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: new, total length: 5,540 mm, Year of construction: 2023, load capacity: 18,000 kg, - Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - Vorderachse Antrieb mit Gegenläufer Bewegung - Abnehmbare Kontergewichte - Proportional ausfahrbarer hydraulischer Ausleger - Frontabstützungen - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht 21.610 kg - Abnehmbare Kontergewichte 6.110 kg - Batterie: 96 V - 1.035 Ah - Gewicht Batterie: 3030 kg - Reifen: Vorne: Nr.4 superelastich 355x50-20” / Hinten: Nr.2 superelastich 355x50-20 - Reifen Hersteller: Trelleborg - Farbe: grau - Lenkung: über die Hinterachse / Lenkwinkel 90°/90 - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern Djdpfx Aloy Hxwbs Soku - Hergestellt aus vorgefertigten und verschweißten Stahlplatte - Auslegerwinkel +65°/-6° - Elektromotor N° 2, 23 kW - 96 V AC, 16 kW - 96 V Isolationsklasse - Radstand: 3100 mm - Bodenfreiheit Mitte: 170 - Höhe Kabine: 2100 mm

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) Djdpfx Aloyvr Iro Ssku This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Inspection Additional details or videos