Used Feed Hopper for sale (13,221)

Condition: used, used, in top condition Bdedpfx Aey Dh Rrol Uog Manufacturer: Holzher Type: 1112 Machine no.: 49474-FD24 Motor with pole changing, 2 speeds, 0.75 kW Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pcs with stand Speeds: 8 steps, 2-30 m/min Required space approx. 1300 x 500 x 800 mm Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Handed over as is, as inspected, function tested, without overhaul, without warranty or guarantee

Condition: used, used, in good condition with new feed rollers Brand: Holzher Type: ET2 Bsdsyztzkopfx Al Uodg Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: used, Year of construction: 2014,

Condition: used, Year of construction: 2011, Front right slider Rear hinge / Bjdpfjtvfz Dox Al Usdg

Condition: used, material width max. 100 mm material thickness 0 - 3 mm Bsdpstqm Dbsfx Al Uedg feed length max. 120 mm material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears Bedjd Eqq Aspfx Al Uedg - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Bdodpfonqzuysx Al Usg Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Adjustable centering rollers. As infeed for resaw / multirip saw etc.

Year of construction: 1996, condition: used, material width 150 mm material thickness 2,5 mm feed length 485 mm Bdodpfeul D Slox Al Ujg total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: as good as new (ex-display), Holzprofi feed VSHP34, number of feed rollers 3, dimensions of the feed rollers 120x60 mm, speeds 8 (4 forward, 4 backward), 4/8/10/20 m/min, motor output S1 1 HP 400 V, weight approx. 70 kg. Bdedpfx Alevrvxuj Ujg Symbolic photo!

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Bdjdpsfg U H Nefx Al Ueg Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Bdodpfx Aofhgz Ijl Ueg Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Year of construction: 2020, condition: new, Aluminum incline conveyor belt with mobile substructure Length: 4000 mm Dimensions: approx. 4000 x 1020 x 105 mm Aluminum construction: Belt width between roller edges: 800 mm PVC conveyor belt with transverse cleats Belt color: green, 2-ply, particularly stable in the transverse direction, endlessly welded with stepped connection * antistatic due to threads in the fabric of the running side Drive: Motor approx. 1.10 kW, speed 1.2 m/sec * speed controllable with a frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Drive and motor control optional Bsdjff Hfpjpfx Al Uedg

Condition: used, Tilting container for forklifts Chip container – bulk container – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Fork spacing (inside): 160 mm Fork spacing (outside): max. 600 mm - Entry pockets for forklift forks – entry bracket for transport and emptying using a forklift or tow truck - Manual tilting mechanism via hand lever - 4 plastic support rollers, Ø 175, and 2 steerable rollers - Folding drawbar Weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Bodshly Ifspfx Al Ujdg Suitable for collecting, storing, and transferring valuable materials.

Condition: used, Feed unit with 6 drum motors Round motor Motor roller Drum motor Bsdpsq E Ipbofx Al Usdg

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Bdedpfxsibware Al Usg Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Bdodsdx R D Depfx Al Usg Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Bdsdpfx Alodzqlto Usg Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Bdodpsv Nbxnofx Al Uog Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Bodpfoxnpx Nsx Al Uodg

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. Bjdpexd Ruwofx Al Uedg TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, Technical specifications: Number of rollers: 4 Motor power: 0.75 kW Continuously variable feed rate: 3-18 m/min Roller size: 120x60 mm Bodeziadljpfx Al Usdg Power supply: 380 V

Condition: ready for operation (used), L&Z Lathe MONDIALE LALLIC 16 N / incl. Acurite / 3-axis digital readout - Centre height: 165 mm - Swing over bed: 325 mm - Distance between centres: 1000 mm - Spindle bore approx. 42 mm - 3-axis digital display ACU-RITE - Speed range: 45–2000 rpm - Automatic longitudinal/cross feeds - Tailstock Morse Taper 4 - Thread cutting: metric / imperial etc. - Quick-change toolholder - Three-jaw chuck - Electrical chuck guard - Chip backsplash Dimensions: L×W×H 2.1×1.2×1.6 m / Weight: 1700 kg Errors and omissions excepted. Bdjdpfx Asy N Eciel Usg

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system Bdjdsy H Ikqepfx Al Uog - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Errors / input mistakes excepted.

Condition: used, Year of construction: 1979, functionality: fully functional, Infinitely variable feed motor and rapid traverse motor from milling machine MH 800P Bdsdpfx Ajyyap Sol Uog

Condition: used, used, in good condition overhauled, with 4 new feed rollers Make: Holz-Her Bdjdpoyvvtfofx Al Usg Model: ETZ Machine no.: 47884 Pole-changing motor with 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pieces with stand Speeds: 2-30 m/min., 4-speed selectable Space requirement approx. 1200x600x700 mm Weight approx. 60 kg Total connected load: 0.75 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handed over in current condition, as inspected, functionally tested, without warranty or guarantee