Used Felder G 660 for sale (116)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Iedpfx Aswp Rgmogpobd Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints Ibedpew Hcp Usfx Agpjd NEW including accessories as shown in the picture

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg Isdpfexlr U Isx Agpebd

Year of construction: 2020, condition: like new (used), i speak english ,romanian, greek Iedpfx Agoiqywlspjbd

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) Isdpfxswc R D Es Agpebd FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: excellent (used), Year of construction: 1997, operating hours: 18,546 h, functionality: fully functional, machine/vehicle number: BF6-31, For sale: Combined woodworking machine Felder BF6-31 from 1997 (three-phase). Ibodoxr A H Iepfx Agpod The machine is designed to integrate a table saw, spindle moulder, planer, and thicknesser. It features a sliding table for the table saw. The arrangement of the tools can be adjusted according to the type of operation. The machine is in good condition, has been cleaned, and partially lubricated. The internal duct of the dust extraction system has been replaced. There is some surface rust, mostly around the saw blade. The thicknesser knives have been replaced with discontinued Felder knives. Both the table saw and the spindle moulder/planer are working properly. Watch the video for more information!

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested Isdpfx Aexnxm Nsgpsbd - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 605.03.018.23, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 133 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 24 months, power: 7.3 kW (9.93 HP), Equipment: motor brake, rotational speed infinitely variable, I am selling our Kappa 400 sliding table saw from Felder in Austria. The machine was delivered to us last year in March 2023. For operational and above all space reasons, the machine was never set up. We ordered the machine from Felder in the middle of 2022 with a few extras. I have photographed the invoice with the product details. As the machine is still in its original packaging, it is therefore available for immediate delivery or collection. The invoice after delivery amounted to EUR 17,378.00 net. Ibsdpfxeu S Ipae Agpjd The machine comes with two new saw blades.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 80-12/020-01, milling spindle length: 30 mm, table length: 3,000 mm, table width: 380 mm, Equipment: motor brake, Types: KF 700 S Pro, Machine No.: 8012/020-01. Year of manufacture: 2001, Power supply: 3/400V/50Hz/10.1 A, Motor: 5.5 kW, Spindle: 30 mm, Pre-milling unit with feed field guide, Table: 3000x380 mm Ibsdpfx Asxmhkhjgpod

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FBP 60, total width: 1,280 mm, total height: 1,540 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 1,300 kg, oil tank capacity: 230 l, I am selling my almost new Felder FBP60 briquetting press (50-70kg) with screw gearbox, fill level sensor, and round silo, 3×400V 50Hz 9.0kW, weight 1300kg. Top condition!!!!! Purchased in September 2023. The machine is like new. For sale due to business closure. Viewing possible at any time. Ibedpfx Agjw H Duljped

Condition: used, machine/vehicle number: 008185, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Ijdpfxexauduo Agpebd Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: excellent (used), It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Ibjdjxwqmajpfx Agpjd

Condition: excellent (used), Year of construction: 2017, Format circular saw Kappa 550 e-motion (Formatkreissäge) - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 Ibsdpfx Agow Tfahjped - Scorer operational display - Crosscut fence 3200 mm, swivels 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Position-controlled rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard: hood for 90° cuts and for angled cuts, height-adjustable and pivotable out of the working area - e-motion control: 15" color touchscreen, operator panel at eye level, USB interface and prepared for network connection, adjustable and pivotable out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scorer operational display - Total operating hours: 443.47 h - Comes with many almost new saw blades and groove cutter blade

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel Ibjdpfevf D S Asx Agpod - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Iedpfx Agjxd Aitspsbd Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: used, Year of construction: 2022, machine/vehicle number: 230.08.007.2, Laufrichtung der Platte : von Bediener nach links max. Anleimerstärke : 3 mm min. Werkstückdicke : 8 mm max. Werkstückdicke : 45 mm min. Werkstücklänge : 140 mm Vorschubgeschwindigkeit : 9 m/min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Durchmesser: 80 mm Höhe: 49 mm Verstellung des Einlauflineals : manuell Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar + zusätzl. Leimbecken Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Profilziehklinge : pneumatisch zustellbar Flachziehklinge : Ja Schwabbelaggregat : Ja Sprüheinrichtung : Trennmittel/Reinigungsmittel Aggregatenanzeige : am Display Iedpfew Naf Rex Agpebd Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 14,5 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. Ijdpfxoxg Ehdj Agpsbd All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: excellent (used), Panel saw Felder Format 4 Kappa 550 Sliding table 280 cm, Iedjxgtf Djpfx Agpjbd Main motor 7.35 kW, Cutting width right side 1250 mm, Scoring unit motorized, adjustable on three axes, Motorized rise/fall and tilt adjustment, Max blade diameter 500 mm, Can cut panels up to 280 cm.

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW Ibjdpfx Aswi Uftogped European CE Certificate

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit Ibsdpfx Aow Axi Asgped 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: like new (used), Year of construction: 2024, Demonstration machine For sale is our Felder RL-300 clean air extraction unit from our showroom, with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has been inspected and serviced by our technical staff. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 Isdpoxdlwmjfx Agpsbd The clean air unit is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available Ibodpfjwkq Tpjx Agped - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Motor frequency: 50 Hz Iedpfew Tkm Tsx Agpobd Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: as good as new (ex-display), Exhibition machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 4,000 m³/h. The extraction unit is in mint condition and has been inspected and serviced by our qualified personnel. Technical data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction can be installed on right or left side - Manual chip shaker - Steel impeller - Max. air flow: 4,000 m³/h Ibsdpfx Agoxdkzqjpod - Minimal space required: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) Iedpfjxdkw Esx Agpebd The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117