Used Film Winders for sale (1,521)

Year of construction: 2025, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Dodpfoylwtkjx Ag Tjup This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 1S is a low-cost, semi-automatic stretch wrapper. In contrast to our KVK 1S Economic, this version has more powerful motors and a more robust turntable. The KVK 1S has a 1500 mm turntable and can wrap pallets up to 2250 mm high. The only thing that still has to be done manually with this pallet wrapper is the application and removal of the film. The speeds of the turntable and film carriage, as well as the brake tension, are adjustable. Automatic detection of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof wrapping". If required, the winder can also be controlled manually. If the stretch wrapper needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Dsdpfx Ageylwr To Tjup As further options for this stretch wrapper, we offer a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film. The KVK 1S is our recommendation if you want to purchase a robust pallet wrapper that makes your life easier with the lowest possible investment. The KVK 1S is ideal for shippers with a pallet volume of between approx. 5-15 pallets per working day (on average). For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. Dsdpfx Asylwrgeg Tsup For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day Dujdpsylwp Eofx Ag Top For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Dodpfxjylwn Io Ag Toup If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Dodpfx Ajylwnnjg Tsup The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. Djdpfx Aeylwnbjg Teup With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Duodpfx Aoylwlysg Top The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Dujdpfx Aoylwlasg Top The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Duodpfxoylwi Se Ag Tjp If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. Duodpfx Ageylwixe Tsp With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. Duodpfoylwhzjx Ag Top With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Dodsylxmfspfx Ag Tjup Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Dsdpjykuhpjfx Ag Teup F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations Dusdpfxsykudds Ag Top The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Dsdpfx Agoykub Ae Teup Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: Dodoykua Sspfx Ag Tjup All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Dedpfx Ageykua Ee Toup Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Duodpfx Agsykty Do Tep Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually Dsdpfx Aoyktv Sjg Tsup With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Djdpfjxq Exqsx Ag Toup

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Dujdpfx Agjvripyj Top

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Dusdpoykz Ebefx Ag Top Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: good (used), functionality: fully functional, type of input current: DC, total width: 3,000 mm, total length: 4,000 mm, total height: 2,700 mm, product width (max.): 1,700 mm, Dear Sir or Madam, Thank you very much for your interest! For sale is this Olbrich winder, which is in good condition. The machine is ideally suited for rewinding thin materials, such as film or paper, into log rolls and subsequently cutting them to size. A special feature of this machine is its ability to wind log rolls without a core. This means the rolls are wound onto themselves, which results in savings on both costs and weight. The materials to be processed can have a width of up to 1,700 mm. The winder is capable of operating at speeds of up to 300 meters per minute and maintains the selected speed consistently without interruption. Djdpexxat Ejfx Ag Tsup This is possible because the Olbrich winder creates a buffer during operation. This buffer is reduced at the moment when the winding process stops, the finished roll is cut off, and a new roll is started. If you are interested, feel free to contact us at any time!

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 7,100 mm, total width: 1,200 mm, total height: 2,200 mm, film width: 462 mm, machine/vehicle number: 256275, TECHNICAL DETAILS Film width: 462 mm Mould set 1: 480 x 195 mm Maximum diameter for mould set 1: 125 mm Mould set 2: 201 x 195 mm Maximum diameter for mould set 2: 125 mm Mould set 3: 190 x 150 mm Maximum diameter for mould set 3: 100 mm MACHINE DETAILS Dimensions (L x W x H): 7,100 x 1,200 x 2,200 mm Dedjxrt Uispfx Ag Teup EQUIPMENT Integrated vacuum pump 3 different mould sets Winder for plastic waste Special tool: coloured knife for triangular cheese