Used Finger for sale (1,678)

Condition: excellent (used), Year of construction: 2011, Masina de inbinat a degetelor Ijdpfjt D Nxzox Ag Nsbc

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Glue applicator for window glulam .Width of rollers 250 mm .Dispensing troughs .The applicator also has a glue tank with dispenser on top .Machine after renovation .Overlaying rollers new. Machine has input and output conveyor .Machine fully operational complete and after overhaul . Ibodjt N H R Ejpfx Ag Nsc

Condition: new, Year of construction: 2025, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Ibsdep R Iwhspfx Ag Nsc Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Finger joint Unit with Cut off Saw, Scoring Saw & Profiling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued panel. Show your mobile number for images on WhatsApp. Can be demo'd working in Sheffield, Yorkshire UK. Full documentation available. Photos etc, available on Whats App & email. Price ex. works, dismantled & loaded buyers transport: £35,000.00 + Vat if applicable, or Euro 42,000.00 ( make an offer as well ) Iedpfx Ajuaf Rdeg Nobc

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm Iedpfx Agolatv Ao Njbc - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Iodjvvi Tyjpfx Ag Nebc Storage location: Customer

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Ibjdpfx Asw Nbacog Noc Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacturing of KVH and BSH structural timber. The line is fully certified for CE and by the Wood Technology Institute in Poznań, in accordance with standards ENPN 14.081 and 14.081. 1. Inclined discharge conveyor 2. Feed table for visual timber grading 3. Buffer before the defect cutter 4. Automatic defect cutter with fluorescent chalk camera 5. Buffer before the finger jointing machine 6. Finger jointing machine with glue applicator and saw for cutting to a specified length up to 13 m 7. Chain storage conveyor from the gluing machine to the planer Iedoxfzyyjpfx Ag Nebc 8. Automatic infeed unit for the four-sided planer 9. Four-sided planer Winter 6-33 10. Roller receiver collecting from the four-sided planer 11. Automatic packaging machine for planed timber 12. Chain feeder 13. Polyurethane glue applicator 14. BSH press, 12 meters long, width 240 mm x height 1120 mm 15. Stretch film wrapper

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. Iedpfx Agsxmvxys Nobc However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Using raw material 24 mm thick and 98 mm wide. The length of the raw material ranged from 200 to 60 m. dismantled

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: PWFJ-2018-001-006, Weight: 5000 kg Power: 32 kW Air pressure: 6 BAR Dimensions (LxHxW): Approx. 18,000 x 2000 x 1600 mm Mill diameter: 125 mm Saw blade diameter: 450 mm Extraction port diameter: 1x200/2x120 mm/1x80 mm Air extraction speed: 30 m/sec Pressing force: Adjustable up to max. 14,000 kg Ibedoxm U Erspfx Ag Nsc Lengths: 450 – 6000+ mm Widths: 50 – 300 mm Thicknesses: 8 – 50 mm Capacity: Up to 8 joints/min Length modes: Variable / Fixed / Optimizing round lengths

Condition: repair required (used), Finger-jointing line Dimter HK 400 Finger-jointing machine Wood infeed lengths: 800-6000 mm Color: blue Needs repair, sold as is The plant has already been dismantled and is stored at the Jöma warehouse A lot of material for little money All technical documentation available We will also provide you with technical support Ibjdpfsvi Hw Njx Ag Nsc

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15151, Working width: 330 mm Min./max. veneer thickness: 0,4-0,8 mm Voltage: 400/3/50 - 480/3/60 - finger form VARIO 3 - rewinder for roll with encoder - Winder Start-Stop by fotolights - electronic controlled by EATON PLC and touch panel - encoder for tape infeed - FESTO valve block with plc connection - automatic start with sensor - - transport speed up to 130m/min adjustable through inverter - new white/grey colour RDS 240 80 05 - Labeling, marks and panel language in English, manual in English - electric and pneumatic in english - perfect working requires flat veneers with parallel cut edges Technical Data with winder: Iedpexclc Tsfx Ag Nsbc min. veneer width: 80 mm max. veneeer width: 330 mm min. veneer length: 340 mm veneer thickness: 0,4 - 0,8 mm transport speed: 60 - 130 m/min winding core: Ø 200 mm max. winding: Ø 700 mm compressed air: 7 - 9 bar air consumption: 60 - 100 NL/min power: 480(400)V 3Ph 60/50 connected load: 4 kW

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Ibodpfjign Efsx Ag Njc

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE Iedpfjwry I Ejx Ag Nebc

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts. Ibjdpsw Uf Tkefx Ag Nsc

Condition: excellent (used), Year of construction: 2011, Famad HSKG 6m frame press Technical data: Maximum workpiece dimensions: length up to 6050 mm, width up to 160 mm Total weight of the machine: 4800 kg Ibsdpsukg Dzefx Ag Noc

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW Iedpfebqqzgex Ag Nobc -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: refurbished (used), Year of construction: 2007, The line for joining PDFD in the single-milling version consists of two main devices: the DFC 60M milling-tenoner (where the ends of the battens are machined) and the PHSL longitudinal press, where the elements are joined into a batten up to 6.6 meters long. Width of input package for milling-tenoner – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air requirement 18 m³/h Iedpfx Agew Hrm Ns Nebc Operating capacity – cycles/min. approx. 2 (batten 6600) Length of glued element – up to 6600 mm The machine is in excellent technical condition!!

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line - German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm Iodpsin Uulofx Ag Nebc - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm

Year of construction: 2008, condition: used, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 10/6100 - CE - Min/max length of raw material 150-700 mm - Min/max working thickness 18 – 50 mm - Min/max working width 40 - 170 mm * MILLING UNIT: - N. 2 scoring blades diam. 200 mm (11 kw) - Trimming unit diam. 250mm (7.5 kw) - Milling unit diam. 250mm (22 kw) * PRESS UNIT - Min. 3000 max. 6100mm - Hydraulic unit motor 4.4kw - Cutting unit motor 2.2kw - Volt. 400/50 Ijdpfx Aepbbnxsg Nobc - Overall dimensions 13000x5000x2100h - Year 2008

Condition: like new (used), Handling equipment for a finger jointing line. Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland. Ibedpfx Asd Duz Ejg Nsc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. 6. joint type: - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: Ijdpfx Agjuiz I Rj Nsbc - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm Iedpfx Agorf Ty So Nsbc total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: reconditioned (used), Year of construction: 2007, Available Immediately: Semi-Automatic Line for Finger-Jointing Wooden Elements Up to 6 Meters in Length The line has undergone a complete overhaul. The finger jointer is equipped with a table featuring a conveyor belt and an additional rotary table. This setup simplifies and speeds up machine operation, thereby increasing efficiency. A new glue nozzle for automatic glue application and a new saw-chipper are included. The press has a fixed jointing length of 6 meters. Finger Jointer Technical Specifications: • Spindle diameter: 50 x 210 mm • Spindle speed: 5,500 rpm • Motor: 15 kW • Tool dimensions: 250 x 150 mm • Special chipper: 300 x 8 mm • Motor: 6 kW / 3,000 rpm Iedpfotyy Exox Ag Nsbc • Infinitely variable feed table • Working width x height: 600 x 30 x 150 mm Hydraulic Press: • Working length: 6 meters • Lamella width up to 160 mm, thickness up to 80 mm, gluing length per cycle: 6,000 mm • Number of pneumatic pistons: 4 (2 from above, 2 from below) • Air pressure: 5–8 bar • Air consumption: 300 l/cycle • Saw blade diameter: 300 mm • Spindle diameter: 30 mm • Motor power: 1.5 kW • Saw movement: pneumatic Dimensions (L x W x H): 7,700 x 1,160 x 1,500 mm Weight: 1,500 kg Optional services for an additional fee: installation, commissioning, and training on machine operation.

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: Ibjdsuddvaopfx Ag Noc - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.