Used Flange for sale (1,585)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Wymysłów
1,472 km
SEW-EURODRIVE RF43 DT71D4 0.37 kW 22 rpm 220/380 V B5 IP54
SEW-EURODRIVE RF43 DT71D40,37 kW 22 obr./min 220/380 V B5 IP54
Call
Condition: excellent (used), For sale: a SEW-EURODRIVE RF43 DT71D4 geared motor with a three-phase motor with a power of 0.37 kW.
The unit is fully functional, tested, and ready for operation. The technical condition is very good; visually, it has normal signs of use resulting from operation. The geared motor is equipped with a cylindrical gearbox with a B5 mounting flange, making it ideal for driving conveyors, feeders, production machines, and other industrial equipment.
Technical specifications:
Manufacturer: SEW-EURODRIVE
Gearbox type: RF43
Motor type: DT71D4
Power: 0.37 kW
Power supply: 3×220/380 V, 50 Hz
Kdsdpfx Asz Snnqjnwsw
Motor speed: 1380 rpm
Output speed: 22 rpm
Output torque: 137 Nm
Design: IM B5
Protection class: IP54
Insulation class: B
Power factor: cos φ 0.70
Success:
Your message has been sent.
Listing
Germany
1,034 km
Boat Engine and Spare Parts Package
Volvo Penta, Mercruiser, OMC, CastoldiMotoren, Antrieben und Bootszubehör
Call
Condition: used, Marine engines, drives and spare parts are offered for sale: Volvo Penta AQ151 engine. AQ151 engine block with crankshaft, pistons, camshaft, carburetor and distributor. Volvo Penta AQ130C engine. Volvo Penta DP-C1 sterndrive. Volvo Penta SX-S sterndrive. Volvo Penta SX-C2 sterndrive. 3 × Volvo Penta 270 sterndrive. 2 × Volvo Penta SX-M sterndrive. OMC Cobra lower unit, alternatively complete sterndrive. MerCruiser sterndrive. Castoldi waterjet drive. Volvo Penta DP-H upper gear unit. Hydraulic power steering pump with cooler and hoses for MerCruiser 3.0/Alpha One Gen. I. Lifting device for Volvo Penta 200-280. Bell housing for Volvo Penta B20/AQ130 with damper and mounting accessories. Upper gear unit for Volvo Penta 80 or 100 series drive. Upper gear unit for Volvo Penta AQ80. Volvo Penta SX-M lower unit. Volvo Penta AQ130 cylinder head with valves. Volvo Penta Engine Control. Flywheel cover for Volvo Penta AQ271. 2 × Volvo Penta trim pump. 2 × universal joint for Volvo Penta SX. Universal joint for Volvo Penta DPH. 3 × Volvo Penta power steering cylinder. Engine bed for Volvo Penta Saildrive. Volvo Penta sliding sleeve. Gasket set for Volvo Penta MD32. Volvo Penta seawater filter. Volvo Penta charge air cooler housing. 2 × installation kit for Volvo Penta D-series engines. Volvo Penta clamp flange. Three-blade bronze folding propeller for Volvo Penta Saildrive SD120. Volvo Penta V-belts and filter material. Various shift cables and shift controls. Boat lights. Various propellers. Instruments and boat fittings. 2 × MerCruiser trim cylinder. Exhaust Y-pipe for MerCruiser 5.7l. Two large boxes of MerCruiser and Volvo Penta V6 4.3l spare parts: cylinder heads, thermostat housings, valve covers, water pump, V-belt pulley, camshafts and wheels, oil pumps, oil coolers, starter motors, gears, manifolds, carburetors, flywheels and trim pump. Inspection possible by arrangement.
Ksdpfxs Aih Dys Anwedw
Success:
Your message has been sent.
Listing
Wymysłów
1,472 km
SEW-Eurodrive gear motor RF32DT71D6 0.25 kW 36 rpm i=24.17 3-phase
Motoreduktor SEW-Eurodrive RF32DT71D60,25 kW 36 obr./min i=24,17 3-fazowy
Call
Condition: excellent (used), For sale: SEW-Eurodrive RF32DT71D6 geared motor with a 0.25 kW three-phase motor.
The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear resulting from use. Thanks to its robust construction, it is ideally suited for driving industrial machinery, conveyors, feeders, rotary tables, and other drive systems.
Technical specifications:
Manufacturer: SEW-Eurodrive
Model: RF32DT71D6
Gearbox type: RF32
Motor power: 0.25 kW
Power supply: 220 V Δ / 380 V Y, 3-phase
Kdjdpez Sngyofx Anwsw
Frequency: 50 Hz
Motor speed: 870 rpm
Output speed: 36 rpm
Gear ratio: i = 24.17
Protection class: IP54
Insulation class: B
Mounting method: IM B5
Weight: 11.43 kg
Country of origin: Germany
The geared motor has a shaft with a keyway and a B5 mounting flange.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Eilenburg
1,149 km
Sawing and drilling system
KALTENBACHKDX 1215 und HDM 1432
Call
Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432
Workpiece width: 1,200 mm
Workpiece height: 500 mm
Drilling diameter: 8 - 40 mm
Number of drilling spindles: 3 pcs
Spindle speed: 150 - 1,100 RPM
Tool changer: 15 pcs
Saw blade diameter: 1,430 mm
Cutting speed: 8 - 30 m/min
Total power requirement: 43 kW
Machine weight approx.: 20 t
Space requirement approx.: m
Additional information
Working range
Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm
U-steel: 80 × 45 mm to 400 × 110 mm
Kdedj Aknd Uopfx Anwow
Double-T beams: 80 × 46 mm to 600 × 220 mm
Wide flange beams: 100 × 100 mm to 1,008 × 302 mm
Special wide flange beams / welded T-beams: up to 1,200 × 500 mm
Workpiece data
Workpiece width max.: 1,200 mm
Workpiece height max.: 500 mm
Drilling unit
Number of drilling spindles: 3 (1 vertical, 2 horizontal)
Drilling diameter: 8 - 40 mm
Spindle speed: 150 - 1,100 RPM
Drilling spindle feed: 0 - 500 mm/min
Rapid traverse: 3,850 mm/min
Rapid return: 8,000 mm/min
Positioning speed: 15,000 mm/min
Automatic tool changer: 15 tool positions (3 × 5)
Clamping system
Horizontal clamping force: 25,000 N
Vertical clamping force: 4 × 10,000 N
Sawing unit
Saw blade diameter: 1,430 mm
Saw blade type: HSS segmented saw blade
Saw blade dimensions: 100 × 4 × 30 × 250 mm
Cutting width: 9.5 mm
Cutting speed: 8 - 30 m/min
Saw feed: 0 - 400 mm/min
Rapid return: 2,000 mm/min
Drives
Drilling drives: 3 × 11.0 kW
Saw motor: 18.5 kW
Positioning drives: 3 × 1.5 kW
Hydraulic unit: 5.5 kW
Hydraulic saw: 3.0 kW
Vertical clamping cylinder: 1.5 kW
Swiveling drive: 0.25 kW
Hydraulic oil heater (option): 3.0 kW
Total power
Total connected power of the drilling unit: 43.0 kW
Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives)
Compressed air
Compressed air connection: 6 - 8 bar
Air consumption: 1,000 l/min
Dimensions
Drilling unit
Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm
Working height: 640 mm
Weight: approx. 8,500 kg
Saw
Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm
Working height: 640 mm
Weight: approx. 10,980 kg
Total weight
approx. 19,500 kg (without accessories)
Electrical data
Operating voltage: 400 V / 50 Hz
Control voltage: 24 V
Success:
Your message has been sent.
Listing
Wymysłów
1,472 km
KSB ETALINE ETL pump with Siemens 0.55 kW EX ATEX motor
Pompa KSB ETALINE ETL silnik Siemens 0.55 kWEX ATEX
Call
Condition: excellent (used), For sale: a linear pump from the renowned German company KSB, model ETALINE ETL, complete with a Siemens motor.
This unit is designed for use in industrial installations, heating and cooling systems, and water circulation systems.
PUMP TECHNICAL DATA
Manufacturer: KSB
Model: ETALINE ETL
Flow rate (Q): 40 m³/h
Head (H): 12 m
Impeller diameter: 191 mm
Rotational speed: 1459 rpm
Year of manufacture: 2021
Flanged connections
MOTOR
Manufacturer: Siemens
Power: 0.55 kW
Voltage: 400 V, 50 Hz
Speed: approx. 1440 rpm
Efficiency class: IE3
Design: ATEX Ex II 2G
Protection: PTC
CONDITION
Very good condition
Complete unit
Slight signs of storage are visible
Technically sound
APPLICATION
Industrial installations
HVAC systems
Ksdpfx Anjz Slydewodw
Water and liquid circulation
Production plants
Explosion-proof zones
Discover more used machines
Success:
Your message has been sent.
Listing
Wymysłów
1,472 km
Heating & blower
Weishaupt WM-G10/3-A ZM 100–1000 kWarmatura DUNGS DN65
Call
Condition: excellent (used), For sale: an industrial gas burner, Weishaupt WM-G10/3-A monarch®, ZM version, from 2011, complete with DUNGS gas valves and accessories as shown in the photos.
The burner’s thermal power range is 100–1000 kW, and its German manufacture and extensive valve set are the key advantages of this offer. This burner is suitable for industrial boiler rooms, as well as heating and process installations – after being adapted to the boiler and gas installation parameters.
The offer includes not only the burner but also a double gas valve, a pressure regulator, a gas filter, pressure switches, and connecting elements. The exact scope of the sale is visible in the photographs.
Burner technical data – according to the nameplate:
Manufacturer: Max Weishaupt GmbH
Series: monarch®
Model: WM-G10/3-A
Version: ZM
Year of manufacture: 2011
Factory number: 40018116
Gas type – designation on the nameplate: N
Thermal power: 100–1000 kW
Gas connection pressure: 15–500 mbar
NOx class: 2
Main power supply: 400 V, 3~, N, PE, 50 Hz
Control voltage: 230 V, 1~, 50 Hz
Electrical power: 1.86 kW
Protection class: IP54
Designation: CE-0085BQ0027
Country of manufacture: Germany
Gas valves and accessories:
DUNGS DMV 525/12 double gas valve
Maximum pressure: 500 mbar
Kdodpfxjz Spgvo Anwjw
Class: A, group 2
Standard indicated on the nameplate: EN 161
DUNGS catalog number: 255248
DUNGS FRS 520 gas pressure regulator
Maximum inlet pressure: 500 mbar
Output pressure range indicated on the label: 5–20 mbar
DUNGS catalog number: 223382
Weishaupt article number: 640679
Weishaupt 520/1 gas filter
Connection: 2″
Maximum working pressure: 0.5 bar
Designation: CE-0085AS0538
Other equipment visible in the photos:
DUNGS GW 50 A5/1 gas pressure switches
Pressure switch mounted on the burner
Pressure gauge
Control actuator
Burner head assembly with electrodes and cables
Pipe elements, elbows, flanges, and fittings
Wiring and connecting plugs
Condition and scope of delivery:
Used burner, with visible signs of use and storage. The elements have some dirt and localized corrosion marks. The photos show the actual item being offered.
Success:
Your message has been sent.
Listing
Forst
1,070 km
90 m³ insulated aluminium flour silo
Zeppelin
Call
Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base and filter housing, ø 3,000 mm
designed for a specific weight of 0.6 kg/dm³ (formerly used as a flour and starch silo)
Manufacturer: Zeppelin
Capacity: approx. 90,000 liters
Diameter: approx. 3,000 mm
Overall height: approx. 15,950 mm + 1,200 mm railing
Weight: approx. 4,000 kg
Kedegig D Depfx Anwodw
Specific weight: 0.6 kg/dm³
Material: Aluminum: AlMg3
Food grade: yes
Insulation: approx. 100 mm mineral wool with screwed-on cover plate (cover plate partially damaged, but can be repaired by us).
Connections and fittings:
On the top:
1 x roof edge railing (ø 1,800 x 1,200 mm) with two access openings
1 x hinged dome with protective grid DN 600
1 x access ladder to the filter housing
2 x crane eyes
In the filter housing:
1 x flange DN 100 for filling line
4 x ventilation opening DN 600 with filter bag
3 x connection for control/measuring technology
In the shell:
1 x ventilation grid (filter housing)
1 x filling line
1 x access door (approx. 1,850 x 800 mm)
The silo ends in a 60° cone NW 1500 with a manhole. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo does not have rupture discs or explosion protection devices.
For further information: see technical drawing and images.
Success:
Your message has been sent.
Listing
Forst
1,069 km
5 x 148 m³ aluminium silo, ø 3,500 mm
Eichholz
Call
Year of construction: 2007, condition: used, functionality: fully functional, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo)
Technical Data / Dimensions
Kdsdpfoxqr Ekjx Anwjw
Available units: 5
Year of construction: 2007
Volume: approx. 148,000 liters
Container type: Silo
Condition: used
Suitable for food: no
Design: upright
Internal diameter: approx. 3,500 mm
Cylindrical height: approx. 14,900 mm
Total height: approx. 17,500 mm
Weight: approx. 3,500 kg
Specific gravity of medium: 0.6 t/m³
Operating pressure: non-pressurized
Ground clearance: approx. 770 mm
Material / Properties
Inner shell material: Aluminium
Notes: Material grade: AlMg3 / AlMgSi3
Support design: Foot ring / stand collar
Top bottom: cone roof
Slope: approx. 15 %
Bottom type: cone
Cone angle: 90 degrees
Top section:
1 x roof edge railing, height: 1,200 mm
1 x crossover walkway with railing
2 x crane eyes
1 x manway DN 600 with vent nozzle mounted
1 x connection flange for level measurement
1 x nozzle for level indicator
1 x flange DN 100 (filling)
Shell:
1 x service door (approx. 1,800 x 850 mm)
1 x cable protection conduit
1 x filling line DN 100 ending in TW connection
1 x welded adapter for level indicator
Bottom section:
The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.
Success:
Your message has been sent.
Listing
Trittau
913 km
Cylindrical grinding machine
JUNKERJucam 1000 /11S
Call
Condition: used, Year of construction: 2012, overall weight: 7,000 kg, grinding spindle speed: 4,400 rpm, workpiece spindle speed (max.): 250 rpm, Cylindrical grinding machine
Manufacturer: JUNKER
Type: Jucam 1000 /11S
Year of manufacture: 2012
Technical data:
- Workpiece diameter: 15–70 mm
- Swing diameter: max. 150 mm
- Clamping length: max. 500 mm
- Swing diameter over steady rest area: 70 mm
Workpiece spindle:
- Dimensions: 150 x 300 mm
- Max. speed: 250 rpm
Tailstock:
- Longitudinal adjustment: manual via sprocket
Tailstock quill:
- Fixed center MT 4 (Junker D75 mm)
- Clamping pressure Adjustable by hydraulics
Grinding table:
- Travel path - Z: max. 1,000 mm
- Feed Z-axis (CNC-controlled)
Kdodpfx Ajx H Andonwow
Grinding spindle I:
- Dimensions: D 205 x 450 mm
- Flange diameter: D 190 mm
- Standard collar: D 127 mm
- Drive: 30 kW
- Speed control via frequency converter
- Max. speed: 4,400 rpm
Grinding wheel I:
- Type: Borazon (CBN) or Diamond
- Diameter: 450 mm
- Bore: D 127 mm
- Peripheral speed: max. 90 m/sec
Steady rest:
- Type: GR-3520-NR
- Diameter range: D 20 – D 35 mm
Dressing spindle:
- Dimensions: D 80 x 250 mm
- Flange: D 100
- Standard collar: D 75
- Drive: 1.8 kW
- Max. speed: 24,000 rpm
- Machine weight: approx. 7.0 t
2 identical machines are available.
In our assessment, the machine is in good used condition and can be inspected under power by appointment.
Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information.
Subject to technical changes, errors, and prior sale.
Success:
Your message has been sent.
Listing
Porta Westfalica
882 km
Mercedes-Benz Arocs 4142 Arocs 5 4142 8x4 SWAN TSP 47-5 160RZ (47 m)
Mercedes-BenzArocs 4142 Arocs 5 4142 8x4 SWAN TSP 47-5 160RZ...
Call
Condition: new, mileage: 750 km, power: 309 kW (420.12 HP), first registration: 12/2025, fuel type: diesel, axle configuration: 8x4, wheelbase: 54,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: AdBlue, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), traction control, - Leaf spring suspension
- Brake booster
- Differential lock
- Sun visor
EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment.
Price negotiable – please contact us.
Mercedes-Benz Arocs 5 4142 8x4 Euro 6e
Concrete pump EuromixMTP
SWAN TSP 47-5 RZ
(Rental possible)
- NEW - without registration -
Vehicle equipment:
Engine OM471, R6, 12.8 l, 308 kW (420 hp), 2500 Nm
Transmission G 330-12/11.63-0.77, offroad PowerShift 3 automatic transmission program
Front axle 7.5 t, rear axle planetary axle 300, 13.4 t
Tires Front axle tires 315/80 R 22.5, rear axle tires 315/80 R 22.5
Wheelbase 5450 mm
S-cab ClassicSpace, 2.30 m, tunnel mm
Disc brakes on front and rear axles
Tank 290 l, left, 650 x 565 x 950 mm, steel, AdBlue tank 25 l
Cab rear wall with window - windshield tinted
Steering, Servotwin, 4-axle and 9t front axle, air
Electronic braking system with ABS and ASR
Parking brake, electronic
Cab rear wall, with window
Rain sensor
Preparation for reversing camera
EuromixMTP - Concrete pump SWAN TSP 47-5 RZ
Model: SWAN TSP 47-5 RZ
Section: Concrete pump:
Kdsdpfx Asym S Dmsnwsw
Max. theoretical concrete capacity: m³/hr
Max. theoretical concrete pressure: 85 bar
Stroke 30 per min
Delivery cylinder: Ø230 mm x 2100 mm stroke
Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm
Concrete valve: S-valve, water pump: 20 l/min - bar
Water tank: 800 l, 12 m hose with spray gun
Concrete hopper: 600 liters
Lubrication: Lincoln automatic lubrication for hopper group
Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28
Rexroth A17FO045, Blau Ascend AP 20.140/115
Switching system: Magnetic sensor (proximity switch)
Switch box: DIGITEX, waterproof
Remote control: Scanreco remote control + 30 m cable
Section: Boom:
Boom S 47-5 (5-section boom, RZ folding)
Type: RZ folding
Max. vertical reach: 46.8 m (without end hose)
Max. horizontal reach: 42.8 m (without end hose)
End hose: 3m single flange, DN 125
Podest-type: X-type
Slewing bearing: 365 degrees
Slewing speed: 0.3 RPM
Diameter of delivery pipe: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings
Control system
Support width front: 8.6 m
Support width rear: 8.7 m
Your advantages
• Immediately ready for use: concrete pumps, concrete mixers, tipper trucks, roll-off tipper trucks
• Chassis, body and assembly from a single source
• Fair prices
• Financing in 19 European countries
• Trade-in of your used vehicle
Your contact persons
• Denis Omeragic: German, English, Bosnian, Croatian, Serbian
• Henri Omeragic: (German, Bosnian, Croatian, Serbian)
• Harun Cevik: (German, English, Turkish)
• Jamila Azzi: (French, Arabic)
• Olga Tissen: (German, Russian)
• Karolina Cyburt: (Polish)
EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica
Success:
Your message has been sent.
Listing
Porta Westfalica
882 km
MAN TGS 41.520 SWAN TSP 47-5 160RZ (47 m)
MANTGS 41.520 SWAN TSP 47-5 160RZ ( 47m )
Call
Condition: new, mileage: 750 km, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, differential lock, electronic stability program (ESP), navigation system, traction control, - Leaf spring suspension
- Brake booster
- Differential lock
- Air conditioning
- Air-suspended seats
- Radio/CD
- Sun visor
EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment.
Price negotiable – please contact us.
MAN TGS 41.520 BB 8x4 EURO 6e
Concrete pump EuromixMTP
SWAN TSP 47-5 RZ
- NEW - without registration
Vehicle specifications:
Diesel engine MAN D2676 LFBA, 382 kW (520 hp), 2,500 Nm torque, Euro 6e
Manual gearbox, MAN 16.25 OD
Front axle, 9,200 kg, non-driven, stub axle, steered, not liftable
Rear axle, 13,000 kg, AP axle with drive-through, straight, not steered, not liftable
Suspension type leaf/leaf (BB) on front axles and driven rear axles
Front axle tires, optional 385/65R22.5 steering tires S+G TL (K)
Rear axle tires, optional 315/80R22.5 drive tires S+G TL (154/150 K)
4,105 mm main wheelbase - 1,795 mm wheelbase between front axles
L-plate and low-noise certificate (according to KDV 1967)
390 l fuel tank volume, 35 l AdBlue tank volume
ABS - EBS - ESP - FGR - EBA - LDW
EuromixMTP - Concrete pump SWAN TSP 47-5 RZ
Model: SWAN TSP 47-5 RZ
Section: Concrete pump:
Max. theoretical concrete capacity: m³/hr
Max. theoretical concrete pressure: 85 bar
Stroke 30 per min
Delivery cylinder: Ø230 mm x 2100 mm stroke
Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm
Concrete valve: S-valve, water pump: 20 l/min - bar
Water tank: 800 l, 12 m hose with spray gun
Concrete hopper: 600 liters
Lubrication: Lincoln automatic lubrication for hopper group
Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28
Rexroth A17FO045, Blau Ascend AP 20.140/115
Switching system: Magnetic sensor (proximity switch)
Switchbox: DIGITEX, waterproof
Remote control: Scanreco remote control + 30 m cable
Section: Boom:
Boom S 47-5 (5-section boom, RZ folding)
Type: RZ folding
Kdsdpjyzay Tsfx Anwjw
Max. vertical reach: 46.8 m (without end hose)
Max. horizontal reach: 42.8 m (without end hose)
End hose: 3 m single flange, DN 125
Platform type: X-type
Slewing ring: 365 degrees
Slewing speed: 0.3 RPM
Diameter of the delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings
Control system
Front outrigger width: 8.6 m
Rear outrigger width: 8.7 m
Your advantages
• Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off dump trucks
• Chassis, superstructure and assembly from a single source
• Fair prices
• Financing in 19 countries in Europe
• Trade-in of your used vehicle
Your contact persons
• Denis Omeragic: German, English, Bosnian, Croatian, Serbian
• Henri Omeragic: German, Bosnian, Croatian, Serbian
• Harun Cevik: German, English, Turkish
• Jamila Azzi: French, Arabic
• Olga Tissen: German, Russian
• Karolina Cyburt: Polish
EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica
Success:
Your message has been sent.
Listing
Porta Westfalica
882 km
MAN TGS 26.520 SWAN TSP 38-5 160RZ (38 m)
MANTGS 26.520 SWAN TSP 38-5 160RZ ( 38m )
Call
Condition: new, mileage: 1,450 km, power: 375 kW (509.86 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, traction control, - Leaf spring suspension
- Brake booster
- Differential lock
- Air-suspended seats
- Radio/CD
- Sun visor
EUROMIX TO GO – Immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment.
Price negotiable – please contact us.
MAN TGS 26.520 BB 6x4 EURO 6e
Concrete pump EuromixMTP
SWAN TSP 38-5 RZ
Initial registration date: 01/2026
Vehicle equipment:
MAN TipMatic 12.28 OD - MAN TipMatic Offroad, - TipMatic Efficiency,
300 l tank volume - 35 l AdBlue tank volume
High-performance engine brake MAN EVBec, adjustable
Hill start assist MAN EasyStart
Differential locks on driven rear axles
Suspension type leaf/leaf (BB) on front axles and driven rear axles
Sun visor, in front of windshield
Windshield wiper operation, automatic, with rain sensor (automatic wiper system)
Daytime running lights, LED - High beam assistant - Work lights on the rear of the cab,
Exterior rearview mirrors, electrically adjustable, heated
Driver comfort seat, air-suspended - Armrests for driver's seat
Multifunction steering wheel, adjustable in height and inclination
Kdsdeyzazkopfx Anwjw
Preparation for toll collection system Toll Collect
EuromixMTP - Concrete pump SWAN TSP 38-5 RZ
Model: SWAN TSP 38-5 RZ
Section: Concrete pump:
Max. theoretical concrete capacity: m³/hr
Max. theoretical concrete pressure: 85 bar
Stroke rate 30 per minute
Delivery cylinder: Ø230 mm x 2100 mm stroke
Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm
Concrete valve: S-valve, water pump: 20 l/min - bar
Water tank: 600 l, 12 m hose with spray gun
Concrete hopper: 600 liters
Lubrication: Lincoln automatic lubrication for hopper group
Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28
Rexroth A17FO045, Blau Ascend AP 20.140/115
Switching system: Magnetic sensor (proximity switch)
Switch box: DIGITEX, waterproof
Remote control: Scanreco remote control + 30 m cable
Section: Boom:
Boom S 38-5 (5-section boom, RZ folding)
Type: RZ folding
Max. vertical reach: 37.5 m (without end hose)
Max. horizontal reach: 32.7 m (without end hose)
End hose: 3m single flange, DN 125
Platform type: X-type
Slewing bearing: 365 degrees
Slewing speed: 0.3 RPM
Diameter of delivery line: 125 mm (outside diameter 132 mm) 5.5" flanges & couplings
Control system
Front outrigger width: 6.3 m
Rear outrigger width: 8.2 m
Your advantages
• Immediately ready for use: Concrete pumps, concrete mixers, dump trucks, roll-off tippers
• Chassis, body and assembly from a single source
• Fair prices
• Financing in 19 European countries
• Trade-in of your used vehicle
Your contact persons
• Denis Omeragic: German, English, Bosnian, Croatian, Serbian
• Henri Omeragic: (German, Bosnian, Croatian, Serbian)
• Harun Cevik: (German, English, Turkish)
• Jamila Azzi: (French, Arabic)
• Olga Tissen: (German, Russian)
• Karolina Cyburt: (Polish)
EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica
| ...
Success:
Your message has been sent.
Listing
Gerolzhofen
1,110 km
Sharpeners for knive
ISELIFL/T 400 V
Call
Condition: new, Description:
Sharpening machine for chisels and hand tools
The ISELI sharpening machine for hand tools type FL consists of the high-quality basic motor, the sharpening unit on the left mounting flange and the grinding wheel or buffing wheel on the right side of the motor equipped with an extension mandrel.
Ideal areas of application: Sharpening / regrinding hand plane irons and chisels for manual woodworking in commercial carpentry shops, wood processing companies or in training centers
Kedpsvwghdjfx Anwjdw
Dry sharpening principle that has been tried and tested thousands of times: thread-free, burr-free grinding in 30 seconds
Time-consuming sharpening of the cutting edge is no longer necessary. This saves time and efficiency
Dry grinding and yet no burnt-out cutting edges
Effortless clamping and unclamping of the tools
Even trainees or unskilled workers can operate this machine - easily and masterfully
Cutting angle adjustment according to scale
Side grinding of the cutting edges in the same clamping
Tool support with 3-way adjustable stop
Built-in temperature switch in motor winding, for 230V 1Ph version
Very powerful grinding motor (0.95 HP at 380 V. 3 Ph)
Technical data:
Operating voltage 400V, 3Ph, 50 Hz
On-site fuse 16 A
Power 0.55 kW
Protection class IP 44
Speed 2800 1/min
Scope of delivery:
- 1 set of grinding inserts (1 piece 15/20/30/40/50/60 mm)
- 1 pot & 1 tool grinding wheel
- 1 instruction manual
Success:
Your message has been sent.
Listing
Rödermark
1,021 km
Hydr. beading machine
FASTI417-125-3
Call
Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356
Technical data:
- max. material thickness at 40 kg/mm² strength 3 mm
- Max. projection 500 mm
- Working depth 430 mm
Kdjdpfx Anst Sucnewew
- hydr. infeed of the top roller
- Roller center distance 125 mm
- Working speeds infinitely variable 3 to 15 m/min
- Right + left rotation
- Drive 400 V 1.5 / 2.5 kW
- Space requirement approx. W 630 x H 1450 x D 1200 mm
- Weight approx. 550 kg
- with: - E - foot switch for top roller feed
- E - foot switch for right - left rotation
- Various roller sets
- Stop apron
Success:
Your message has been sent.
Listing
Dortmund
842 km
Cylindrical grinding machine
SCHAUDTRFH 500
Call
Condition: good (used), Hydraulic cylindrical grinding machine
Center height 100 mm
Center width 500 mm
Grinding wheel diameter min./max. 200 - 300 mm
3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm
Kodper E Aziefx Anwodw
Workpiece spindle head:
8 workpiece speeds, adjustable 30 - 750 rpm.
Spindle taper or inner taper of the
workpiece spindle MK 4
Tailstock:
Inner taper of quill MK 3
Quill travel 30 mm
Table:
Maximum table inclination +/- 6°
Table speed, adjustable 0.1 - 6.0 m / min.
Motor power 3 kW
Dimensions L x W x H 1650 x 1350 x 1400 mm
Weight 1900 kg
Accessories / Special features:
- Manual or automatic operation
- Automatic infeed
- Grinding wheel flange with grinding wheel
- Wet grinding device
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
DE - 44143 Dortmund-Wambel
Success:
Your message has been sent.
Listing
Karben
999 km
Three-jaw chuck
ForkardtF315
Call
Condition: good (used), FORKARDT
Three-jaw manual chuck
with wedge bar system
Type: F315
No.: 1403959
with flange for KELLENBERGER cylindrical grinding machines
Kodpfx Aozi Aqzsnwjdw
Equipment:
1 set basic jaws
1 set hardened jaws
1 piece flange D: 300 mm ISO 50, M24
1 set operating wrench
1 piece operating manual
Condition: good, fully functional
Success:
Your message has been sent.
Listing
Karben
999 km
Cylindrical grinding machine
KELLENBERGER600 U
Call
Condition: excellent (used), KELLENBERGER
PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE
TYPE: 600 U
YEAR OF MANUFACTURE: 2003
PARTIAL OVERHAUL: 2026
(Technical data see attached documents)
Center height: 175 mm (without height adjustment)
Grinding length: 600 mm
Kdsdpfszhma Djx Anwow
Equipment:
- Standard accessories
- Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle
- Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard)
- Grinding wheel equipment right for D: 300 x 40 x 127
- Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and
D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right)
- Variable spindle drive with Danfoss frequency converter
- Balancing device for dynamic balancing, type ELASO
MANOBALANCE 750/EB 2000
- RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock)
- Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces)
- Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm
- Tailstock standard MK 5 with adapter flange DIN 55027 size 5”
Bore D: 38.2 mm (standard)
- Sine bar on the tailstock
- Tailstock with manual retraction for quill travel
- Micrometer adjustment on the tailstock
- Pneumatic relief of the tailstock
- FORKARDT planetary three-jaw chuck D: 200 mm
- REISHAUER wedge-bar three-jaw chuck D: 160 mm
- Permanent magnet chuck D: 200 mm
- Collet chuck for Schaublin B32
- Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm
- Set of 8 workpiece supports incl. holder
- Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm
- Swiveling dressing tool for dressing during external, surface or internal grinding
- Side and angled dressing tool for side and angled dressing of the grinding wheels
- Dial indicator stop for table swiveling with dial indicator 1/100 mm
- Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm
- Dressing stop for internal grinding
- HEIDENHAIN Digital length measuring system for the X and Z axes
- STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l
- WALDMANN machine lamp
- Set of vibration-damping pads
- Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016)
- New acceptance test report according to KELLENBERGER standard
- CE conformity
- Documentation
Condition: very good, machine geometrically and mechanically overhauled (see geometry report)
Success:
Your message has been sent.
Listing
Rödermark
1,021 km
Manual bead roller
RAS11.15
Call
Condition: good (used), Year of construction: 2001, Offer 26153
Kdedpfx Anozg Dhiewsw
Technical data:
- max. overhang 200 mm
- center distance between rollers 50 mm
- max. material thickness at a tensile strength of 40 kg/mm² 1.25 mm
- space requirement approx. W 300 x H 1150 x D 500 mm
- weight approx. 25 kg
- various beading rollers
Success:
Your message has been sent.
Listing
Hagenow
971 km
City bus
MANA78 Lions City LE, 38+40+1, Euro 5 EEC, Retarder
Call
Condition: used, mileage: 573,064 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until finalization, errors, typographical errors, and prior sale:
MAN Lions City LE A78, 38+40+1 + 2 emergency seats
Kdedpfx Anez Id Snowow
(Vehicle 117)
First registration: 16.12.2013
573,064 km
Engine: 6,871 cc
213 kW / 289 hp
Euro 5 EEV
MOT valid until 12/2026, technical inspection valid until 06/2027
Permissible total weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg
Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm
Double doors at the front and rear
Driver's cabin with door
38 + 2 emergency seats + 40 + 1
Fold-out ramp
Auxiliary heater + 2nd heater
Retarder
Fully automatic transmission
Microphone
2 x electric mirrors + mirror heating
12-volt socket
Emergency exit
Stop brake
Driver's seat ISRI with heating and ventilation
Lawo
Tires 275/70R22.5, front approx. 80%, rear approx. 60/60%
Small dent/scratch on the driver's side, center
18.09.2024: Radiator replaced, 23.06.2025: Thermostat replaced, flange sealed, front axle brake pads replaced, 16.09.2025: Steering housing, star cover, water pump, crankshaft seal replaced
Various signs of wear and tear, commensurate with age
Good overall condition
Last inspection at 555,260 km on 15.07.2026, next inspection at 615,260 km
Price: €11,000.00 (net)
All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.
Success:
Your message has been sent.
Listing
Bovenden
978 km
Roll-off tipper truck
MANTGS 26.480 6x2-4 BL CH, 3x VORHANDEN!
Call
Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 315/70R22,5, rear tire size: 315/70R22,5, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, traction control, trailer coupling, Vehicle location: in transit, short designation: Haus, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, center console, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, automatic transmission, lifting and lowering, differential lock, fog lights, leaf and air suspension, last axle can be lifted and steered, trailer hitch with air and light connections, last axle with trailing steering, central locking, green environmental badge.
Kjdpez N Sz Uofx Anwedw
Wheelbase: 4500 mm, body: 20t roll-off system Hyva T21-57/60-S for containers 4.5 to 7m, disc brakes on front and rear axles, electronic braking system (EBS), emergency brake assist, transmission MAN TipMatic 12.26 DD, TipMatic shifting strategy, ride height on rear axle raised by 30mm for increased ground clearance above the rear axles (e.g. for ARK), trailing axle can be unloaded, lane departure warning system, central locking without remote control, short-distance driver cab NN, multi-function steering wheel adjustable in height and inclination, MAN App integration, wheelbase 1350mm between rear axle and trailing axle, instrument cluster Professional 12.3 inches, 310l aluminum tank on the right, transmission with auxiliary drive NH/4c without flange f=0.97 at approximately 3:30 o'clock, emergency braking assistant EBA cannot be deactivated, traffic sign recognition, tire pressure monitoring system (TPM) with tire temperature display, MAN Media System Medium 7 inches, MAN AttentionGuard alertness system cannot be deactivated, diesel engine MAN D2676 LFAY, 353 kW (480 hp) power, 2,450 Nm torque Euro 6e.
All information is without guarantee, as the vehicle is in transit!
New vehicle from stock with registration date 10/2026! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!
Success:
Your message has been sent.
Listing
Halberstadt
1,029 km
CNC-Lathe
SPINNERTC77 MCY
Call
Condition: good (used), Year of construction: 2008, Ref. -No.: 10474
Manufacturer: SPINNER
Type: TC77 MCY
Year of construction: 2008
Type of control: CNC-Steuerung
Control: Siemens 840 D
Storage location: Halberstadt
Country of origin: Germany
Machine-No.: AP0XXXXX
Chuck diameter: 210 mm
Tailstock - diameter: 110 mm
Feed speed X / Z: 15/24 mm / min
Turning Diameter: 500 mm
Max. Torque: 113 Nm
Travel -X Axis: 350 mm
Travel -Y Axis: 230mm (-110mm +120mm) mm
Travel -Z Axis: 1160 mm
Distance Between Centres: 800 mm
Spindle 1 spindle head diameter (flange): A8 mm
Kjdpfx Ao Ahkvzonwsdw
Spindle 2 spindle head diameter (flange): A6 mm
Quills Morse taper: MK4
Turret places: 12 Pcs
Machine length: 3250 mm
Machine width: 1980 mm
Machine Height: 2090 mm
Weight Of The Machine Ca.: 7,5 t
Max. swing diameter: 690 mm
Further information:
Spindle head: A8
Bar capacity: 77mm
Bar capacity: 52mm
Number of rotating tool positions: 12
Y axis + C axis.
Machine can be inspected under power by arrangement.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Mindelheim
1,258 km
CNC turning and milling center
GildemeisterCTX 520 Linear
Call
Condition: used, Year of construction: 2007, CNC turning machine Gildemeister
Type/Model: CTX 520 linear
Condition: Used
Year of manufacture: 2007
Technical data
Max. turning length: 1300 mm
Max. swing diameter over bed: 680 mm
Max. swing diameter over cross slide: 565 mm
Spindle head according to DIN flat flange: Size 220h5
Spindle diameter in front bearing: 150 mm
Spindle bore: 107 mm
Max. chuck diameter: 315 mm
Tooling system: Disc-type revolving tool holder VDI50
Number of turrets: 12
Station for driven tools: 12
Travel in Z-axis: 1350 mm
Travel in X-axis: 315 mm
Tailstock quill diameter/travel: MK 5 / 1200 mm
Total connected load: 65 kVA
Voltage: 400 V
Frequency: 50 Hz
Main spindle speed: 4000 rpm
Feed rate along Z-axis: 3000 rpm
Feed rate of Z-axis slide: 0.025 - 45,000 mm/min
Feed rate of X-axis slide: 0.025 - 60,000 mm/min
Rapid traverse along Z-axis / X-axis: 45 / 60 m/min
Feed force along Z-axis / X-axis: 10,000 N / 5,000 N
Space requirement: approx. 43 m²
Weight: approx. 10,000 kg
Ksdpfx Ajz Ng R Dsnwjdw
Inquiry item: Transportation costs will be provided in a separate quote.
Success:
Your message has been sent.
Listing
Legden
800 km
Three-sided tipper truck
MANTGS 35.480 8x6BB Meiller DSK Bordmatik 13m³
Call
Condition: used, mileage: 519,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total length: 9,110 mm, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 13 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 917 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, The vehicles have been fitted with new engines!!!!
Cab & Comfort
Cab M (2240 mm wide, 1880 mm long)
* Air-suspended cab mounting
* Comfort seat covers
* Driver comfort seat, air-suspended, air-conditioned, heated, with lumbar support
* Passenger seat, static
* Instrument panel "Base-Line"
* MAN Tronic on-board computer
* Display languages: German & English
* Adjustable steering wheel3
* Car phone antenna
* CB radio antenna
* Radio MAN BasicLine
* Radio system
* 12V/24V sockets in the cab
* Hydraulic/electric cab tilting mechanism
Ksdpj Agyahjfx Anwedw
----Heating & Climate Control
Auxiliary heater Eberspächer D4S
* Air conditioning with automatic control
----Brakes & Safety
Engine brake EVBec
* Flame starter system
* Immobilizer
* Emergency steering pump
* Multifunction steering wheel
* ABS
* Drum brakes front and rear
* Pneumatic parking brake, front
----Lights & Visibility
Additional long-range and fog lights
* Halogen twin headlights H7
* Headlight range adjustment
* Work light, left
* Position and marker lights
* 2 halogen rotating beacon lights
* Insect screen
* Rotating beacon lights, yellow
* Access steps on fenders
* Entry lighting
* Reading lights
* Cargo area lighting
* Central locking
* Electric two-tone horn
* Heated and electrically adjustable mirrors
----Safety
Reversing warning, can be switched off
* Electronic speed limiter 89 km/h
* Cruise control
* Boost pressure indicator
----Engine & Transmission
Engine D2676LF07, 480 hp, EURO 5 SCR, 2300 Nm
* Manual transmission ZF 16 S 252 OD
* Front axle VOG'09 / VP'09, driven
* Parabolic springs, front, 9.5 t
* Water cooler & charge air cooler for high temperatures
* Switchable front-wheel drive
* Transfer gearbox G172
* MAN BrakeMatic
* Rear differential lock
* Front differential lock with warning buzzer
----Hydraulics & Body
MEILLER axial pump 296/54
* PTO parameterization
* PTO without flange
* Tipper operation in the cab
* Plastic fenders, MEILLER
* Trailer coupling RINGFEDER 5050 A
* ABS trailer socket
* 24V 7+7-pin trailer socket
* Folding underrun protection, rear
MEILLER D421 three-sided tipper, 6000 x 2300 mm, floor 7 mm
* Fixed corner posts
* Side panels M-JET 4 mm
* Side panels, 900 mm
* Right side panel, oscillating (Bordmatik, left)
* Front wall, 1100 mm
* Deflector plate, 500 mm
* Rear panel, 900 mm
* Oscillating rear panel with automatic latch
* Chute, 350 mm
* Hydraulic connection for trailer operation, rear
* Bordmatik, left
----* Tire size, front axle: 385/65R22.5
* Tire size, rear axle: 315/80R22.5
* Fuel tank: 400 liters
* AdBlue tank: 35 liters
* Technical total weight: 37000 kg
* Unladen weight: 16050 kg
* Permissible trailer load: 24000 kg
* Overall length: 9110 mm
* Wheelbase: 1795+2980+1400
----Vehicle number/Vehicle: 11802+11798----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.
We are happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional charge:
----Trade-in of your old vehicle
TÜV/SP inspection
Complete export processing
Arrangement of financing
Application for export license plates
Vehicle transport
Vehicle registration
Recovery and vehicle transport
YOUR VTS TEAM
Success:
Your message has been sent.
Listing
Willich
802 km
CNC lathes
MONFORTSRNC 4
Call
Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, There are 2 MONFORTS CNC lathes for sale.
* Machine 1, MONFORTS RNC4, serves as a source of spare parts.
The main circuit board has been removed and used elsewhere.
(Chuck cylinder; hydraulic unit, spindle, tailstock; turret; chip conveyor;
various control parts are still usable.)
You are welcome to submit an offer for this machine.
Control: GE Fanuc
Tool turret: SAUTER turret ø40
• Type 0.5.801.020;
• ID No. 070615;
• Com. No. 14-89.44436/7
Without chuck
Without tools
Accessories:
Articulated band chip conveyor
Discharge height 1100 mm
KS cable carrier
Year of manufacture: 1990
Serial No. 3046
-----
* Machine 2 MONFORTS RNC 4 without tailstock
Machine No. 137xx
Series No. 119xx
Control: GE Fanuc Monforts Control System F
SAUTER turret ø 40mm
• Type 0.5.801.020;
• ID No. 070615;
• Com. No. 14-89.44436/7
Without chuck, without tools
Control powers up without problems.
Maintenance, regular replacement of buffer batteries.
Condition: The machine can be moved in the X & Z axes.
The hydraulic system does not power up, probably because the
solenoid valves are stuck due to prolonged downtime. Can be repaired.
Ksdpfx Aj Ahzfwsnwodw
Accessories:
Chip conveyor, KS cable carrier
Year of manufacture: 1990; Serial No. 3254
-----
Technical data: RNC 4, RNC series
Control: Fanuc 10 T Monforts Control F
Max. turning length 600 mm / 1000mm
Machine Ø over bed 420 mm
Max. turning Ø over cross slide 280 mm
Tool turret stations 12 VDI
Spindle flange according to DIN 55026 A 6/A 8
Spindle Ø in the front bearing 130 mm
Material passage through the spindle 65 mm
Speed range, basic version 5-4000 rpm
Tool turret, 12 tool positions
Total power consumption: 22 kW
Machine weight approx.: 4 t
Space requirement approx.: m
The machines are no longer used in production.
Both machines can be sold as a package.
The machines are still connected to the power supply.
The control of machine 2 powers up without any problems.
Success:
Your message has been sent.
Listing
Bitburg
902 km
Membrane press - Available at short notice -
OrmaAir System Eco 30/14
Call
Condition: new, Year of construction: 2026, Orma Membrane Press Air System Eco 30/14
Kdsdpfe Afau Tsx Anwow
Table dimensions: 3000 x 1400 mm
Usable dimensions: 2840 x 1340 mm
Movable lower platen
No. 6 cylinders, diameter 140 mm
Cylinder stroke and press opening: 250 mm
Total pressure: 300 tons
Max. specific pressure: 5 kg/cm2
Upper, perforated, solid steel platen
No. 1 automatic table for loading and unloading
Digital control via touch screen
Electric boiler, 21 kW, for thermal oil heating
Safety net around the machine
- Membrane set with a quick-release system for easy installation and removal
- Center flanges for high-gloss PVC
- Manual magnetic pin system
- Unwinder for 2 PVC rolls with pneumatic saw
PRICE LIST 2026 € 175,150.00
Location: ex works
- Available for immediate delivery -
We make it easier for you to find: "flange"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Flange (1,585)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month








































































































































































































































































































































