Used Flanging for sale (1,412)

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Gtsdpfxex Srwfs Abdjt Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg New - unused

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #398 Mercedes-Benz Arocs 3551 8x4 with Combined High Pressure Jetting and Suction Pressure Tank Body ADR Type K 1.0-18.0 / 28 PE This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank body is a NEW vehicle, built for the highest performance requirements. With VacuStar WR 3100, Uraca KD 718, large hose storage cassette, DN125 telescopic boom, and complete ADR L4BH equipment, it is immediately ready for demanding sewer, industrial, and hazardous goods applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 1.0-18.0 / 28 PE • Ejector piston with 3 locking positions • Suction from open waters possible (“comfort version”) via boom cassette with integrated filter • Tanker equipment ADR – Type class AT/FL L4BH • Discharge via pneumatically actuated piston • Sludge water outlet DN80 for backflushing via the boom into the channel Vacuum System • CVS VacuStar WR 3100 – approx. 3,100 m³/h at 400 mbar • Approx. 20 m HD hose DN125 • Hose storage cassette with simultaneous telescopic boom DN125 • Parallel routing of suction and HD hoses over the boom • Reach on hit side: 5,200 mm • Hydraulic suction hose reel on the right with 30 m DN75, fully passable High-Pressure System • Uraca KD 718 – approx. 315 l/min at 170 bar • Large HD hose reel for 240 m DN25, 180° swiveling • Equipped with 160 m DN25 • Small HD hose reel for 80 m DN13, hydraulic • Equipped with 80 m DN13 Special Features • Hose storage cassette with telescopic boom DN125 • Continuously adjustable suction hose height (hydraulic, roller guide carriage) • Hydraulic, telescopic, 180° swiveling boom arm • Electric cable winch on the boom • ADR L4BH, including EX/II, EX/III and AT • Spray gun • LED beacons • LED ambient lighting • CAN-BUS remote control for work functions • Radio remote control with 14 functions • Hot water hand washing unit • Large locker rear left (e.g. for push camera) • Reversing camera • Sound insulation for pump compartment • Large equipment box • Toolbox • Holder for traffic cones • Vice • Ladder • Large advertising boards right & left Gedpoxc Sz Njfx Abdott Special Equipment • Axle load measuring system • Digital radio DAB/DAB+ • ADR equipment package • Right-hand outer mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-installation cab • High beam and cornering light assistant • Movable cab entry • Front suspension: 9.0 t / 4-leaf • Remote online query function • Tinted windshield with band filter • Vehicle without trailer coupling • ADR hazardous goods version Type FL • Speed limiter • 16-speed gearbox G 280-16 • Gearbox lock (independent of transmission) • Rear axle ring gear 300 • 3-piece mudguards with splash protection • Fuel tank 290 l aluminum, left • Cool box / refrigerator • Cooling package for hot regions • Front air intake • Reinforced engine brake • Trailing axle: 9 t steered, relievable, liftable • Navigation system • PTO – smooth flange • PTO independent of transmission and dependent on clutch MB 1.65 • Programmable special module • Wheelbase variant 3,900 mm • Frame overhang 1,200 mm • Re

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min Gedpfxevb Dl Uo Abdstt feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Gjdpex Sw Hrofx Abdott Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Cost savings for the end user €38,000 vs. €21,000 DMA supplies high-quality CNC drilling machines at bargain prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to remain in control themselves. The purchase price includes: - CNC controller - CNC Cam - Starter kit of drilling tools Focus on functionality: Your machine, your management, our lowest price. No. 7 vertical rows No. 1 TH1 horizontal double spindle (X-axis) for front/back drilling Godex R Drxopfx Abdott Manual panel alignment END PANEL READER for perfect matching Remote support software Extraction flange Scratch-resistant BRUSH TOP to prevent accumulation of dust and chips Work MODE selectable at the operator side or in continuous cycle HARDWARE AND SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB port and Ethernet port for file import, online support, and software updates Linux kernel-based system Fobmsu U Hgiegku S Hepp CNC memory for up to 1,000 programs

Condition: used, Year of construction: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine Model FS 50 SA Grinding area 500x250x375mm, Vertical automatic with fine-pole electro-magnetic chuck, Grinding wheel diameter 300x50x76.2mm, with paper band filter system, with manual dresser on top. various wheels and flanges Gtedpfowq Nc Nox Abdst Weight: approx. 2400 kg Space requirement approx. 2500x1800xHeight 2500mm Machine is located with us in 71334 Waiblingen-Beinstein and can of course also be inspected. Please contact us.

Condition: new, mileage: 60 km, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle Equipment – Compact Overview / Drivetrain & Transmission * MAN D2676 Euro 6e engine, 540 hp, 2,650 Nm * MAN TipMatic 12.26 DD automatic transmission * Retarder Eco + MAN EVBec engine brake * Drive modes: Efficiency Plus, Performance, Manoeuvre, EfficientRoll, Idle Speed Driving ----Cab & Comfort * GM cab (wide, long, medium height) * Premium driver’s workspace package * Comfort suspension, electric tilting * Electric glass roof * Roof spoiler + side flaps (aerodynamic) * Central locking with remote control * 4 vehicle keys * Automatic windscreen wipers with rain sensor (automatic wiping) * Automatic headlight control with light sensor * Electric stationary air conditioning * Auxiliary heater * High beam assistant * External sun visor + electric interior blinds ----Infotainment & Connectivity * MAN Mediasystem Professional navigation (12.3") * MAN SmartSelect control unit Gtedpjww Sznefx Abdjt * MAN Advanced sound system with subwoofer * Navigation Europe + Russia * Online traffic information * Smartphone integration * Connectivity board module * Preparation for MAN apps * Integrated reversing camera system * On-board computer with multifunction leather steering wheel * Electric sunblind * Fully digital cockpit ----Seats & Sleeping Area * Premium driver & passenger seats, air-suspended * Seat heating & ventilation * Lumbar support, shoulder adjustment, armrests * 2 bunks (110 mm comfort mattresses) * Extensive storage compartments, shelves, refrigerator * LED interior lighting package incl. reading and orientation lights ----Lighting & Visibility * LED package Plus * LED headlights, fog lights, cornering lights, rear lights * Ambient lighting ----Brakes & Safety Systems * Disc brakes all around * EBS, ABS, full brake assist * Emergency brake assist EBA (cannot be deactivated) * ACC Stop & Go adaptive cruise control * Emergency brake assist * Lane departure warning * Turn assist * Blind Spot Assistant (BSIS) * Attention warning (AttentionGuard) * Traffic sign recognition * Reversing assistant * Intelligent speed assistant (ISA) * Preparation for alcohol interlock, cannot be bypassed * Reversing motion system ----Tanks & Power Supply * Fuel tank 460 l (left, aluminum) * AdBlue tank 80 l (right) * 2× 12 V batteries (210 Ah, AGM) * Electric main battery switch ----Chassis, Axles & Tires * Axle configuration 6x2/4 * Front axle 9,200 kg, leading axle 8,200 kg (liftable), rear axle 13,000 kg * Suspension: leaf/air (front leaf, leading & rear axle air) * Digital axle load display * Alcoa Dura-Bright EVO wheels * Tires: Front & leading axle: 385/55R22.5; Rear axle: 315/70R22.5 * Tire pressure monitoring system incl. temperature display * 2nd axle steered & liftable ----Interfaces & Trailer Technology * JOST JSK 37 C fifth wheel coupling (2") * 40 mm kingpin * Electrical & pneumatic connections behind the cab * FMS interface * PTO, gearbox-dependent, type NH/4c, without flange, f=0.97, approx. 2:30 position * Digital data interface (Application Fit) * Preparation for tipper hydraulics control unit * Preparation for tipper hydraulics * ABS socket for trailer ----Appearance & Paintwork * Cab, Aero package, high roof, bumper in pure white RAL 9010 * Fuel tank: 460 l * AdBlue tank: 80 l * Front axle tires: 385/55 R22.5 * Lifting axle tires: 385/55 R22.5 * Rear axle tires: 315/70 R22.5 * Wheelbase: 2600 mm + 1350 mm + 1065 mm ----Vehicle number/Vehicle: 11159 ----Subject to errors and prior sale

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Godpjx Rx D Aofx Abdjtt Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm Gjdpfx Abewc A Snodjtt vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : - 1 workbench NEW 2000x800 mm with Urphen platte blue 2000x800x50 mm      1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bed for overhead drive 1 W-20 headstock without gear reduction and drawbar, revised 1 revised screw-operated carriage Gtsdodr R Tcepfx Abdot 1 revised aligned tailstock 1 motor 380V/50Hz/3ph. 2 speed 1 set of collets W20 1 chuck 2x3 jaws Ø 100 mm on w-20 flange 1 new set of Multifix tool holders including - 1 turret Multifix A with AG20 stud - 3 tool holders AD1675 - 1 bar holder AH2085 1 self-tightening drill chuck cap 1-13 mm on MT2 stud 1 male center MT2 OPTION 1 used tensioner with new belt CHF 500 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 18 rpm -Power: 0.75 kW -Shaft diameter: Ø 40 mm -Shaft length: 75 mm Gsdpfxeci N Ixo Abdstt -Hole circle: Ø 215 mm -Outer flange: Ø 250 mm -Design: B5 -Protection class: IP 65 -Dimensions: 560/248/H300 mm -Weight: 43 kg

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Gtjdpfx Aowbfigebdjt Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Godpfx Aevw Upcebdett Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 2000, Technical details: Gtedpfju Nvmdsx Abdjt lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Year of construction: 2020, condition: new, We offer here a new shelf connector of the manufacturer Nedcon NS for sale. Included in delivery are: 01x SET Spacer NR new length: 200 mm Material colour: sendzimir galvanized consisting of each: 01x spacer NR L=200, sendzimir galvanized Gtsdpfx Abof S Iq Tjdot 02x hexagon head screw 8.8 M10x25 galvanized 02x Toothed nut, hexagonal 8.8 M10 flange galvanised 04x hexagon head screw, M10 galvanized

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm Gtodjv U Nwiepfx Abdst Total weight: 30 kg

Year of construction: 2015, condition: good (used), We offer here a used box shelf for sale. The shelf is ideal for lighter boxes, but also cardboard boxes can be easily accommodated. The crate rack can be individually adjusted to your own needs. Both the angle of inclination of the roller bars and the distance between levels can be adjusted quickly and easily with an Allen key. Gjdpshiyhwjfx Abdott The levels are equipped with guide rails on both sides and a stop on one side, so that the crates/cardboard boxes are secured against falling down unintentionally. Technical data and further information: Manufacturer: Beewatec Description: Cardboardrack 1 lanes 19032-01 Year of manufacture: approx. 2015 Notes: The rack is shipped pre-assembled as shown in the pictures. Included in the scope of delivery are: 01x crate shelf, used total length: approx. 2.500 mm total depth: approx. 610 mm total height: approx. 1.915 mm interior depth: approx. 485 mm Dead weight: approx. 160 kg Load capacity per level: approx. 15 kg Load capacity of entire shelf: approx. 100 kg Number of levels: 04 pcs. Number of roller strips per level: 02 pcs. Diameter of tubes (frame): approx. 27 mm Length of roller strips: approx. 2,430 mm Profile dim. Roller strips: approx. 42 x 35 mm (WxH) roller width: approx. 25 mm roller pitch: approx. 35 mm Material colour frame: galvanized Material colour wheels: cream white Material colour of frame: galvanised incl. label holder incl. guide rails: approx. 2,450 mm incl. end flange

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 -Elbe .: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg Gtedpfex Ngikox Abdet

Condition: good (used), The scope of delivery includes: 01x Pressed grate, used Material color: hot-dip galvanized Total depth: 990 mm (bearing bar direction) Total width: 1.195 mm (cross bar direction) bearing bar dim.: 40/2.0 mm frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | pcs. Internal designation: L Gtsdenbfhaspfx Abdst Remark: - The frame has been flanged inward from all sides. - The gratings may have damage, scratches, dents, welds, etc. General information about the item: This item is offered for pickup only. A beyond desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 380/70 -Elbe .: 0.107.110.0001 -Flange Ø 75 mm Gtjdpex Ngf Ejfx Abdst -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 380 mm -Weight: 3.2 kg

Condition: good (used), The scope of delivery includes: 01x mounting bracket, used Surface: hot-dip galvanized weight: 2,26 kg | pcs. Screw-on plate: 100 x 120 x 10 mm Gjdpfsi A Ik Ijx Abdjtt ( with 4 round holes Ø 10 mm ) screw-on flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 480/70 -Elbe .: 0.107. see photo -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm Gjdpfsx Nf Ufex Abdjtt -Dimensions: Ø 75 x 480 mm -Weight: 3.4 kg

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 Gsdpfx Aex Nf Tnjbdott -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/35 -Elbe item no.: 0.107. 100,0001 Gsdpox Nf R Tsfx Abdott -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 330 mm -Weight: 2.7 kg/pc.

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 -Elbe .: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece Gtedpfox Nf I Eox Abdst -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.