Used Flow Meter for sale (31)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Psdpfxoxwtu To Aazsgt Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Pgjdpfxjhw Nfqo Aazst Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Pjdpfoy Urzijx Aazjgt Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Pgodozhkmuopfx Aazot Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “HP Color LaserJet Flow E87740”. Item for sale: Psdpfx Aaoz Arvyozogt 1x HP Color LaserJet Flow E87740 with the following specifications: Includes duplex ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,232 pages Colour: Approx. 558 pages Black: Approx. 1,674 pages Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Pgodpfx Aaozvcknszst Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Pgedpfx Aasy D A Ifszst Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Pgedpfxswmcmto Aazjt Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Pgjdpfx Asv T D D Ueazjt Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm. Price € 14,590

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Pgodpjwd Sh Ujfx Aazet Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us. Pjdpfx Aezwpfheazegt

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, For Sale: Flow 9XVD-55 High-Pressure Pump We are offering a Flow 9XVD-55 high-pressure pump for waterjet cutting applications. Condition: The machine is disconnected and ready for collection. Sold in its current condition. Suitable for recommissioning, refurbishment, or spare parts. Specifications: Manufacturer: Flow Model: 9XVD-55 Type: High-pressure pump for waterjet systems Podpfxszrznwo Aazogt Many spare parts according to the photo. Complete manuals included. Inspection is possible by prior arrangement.

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. This is an ex bakery machine, in good working condition Pgsdpey D Uzqefx Aazet Price € 5,900

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Pgedezp Ik Tspfx Aazst

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 Pgodpfx Aajzimcbjzet - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. Pgsdoywzhkopfx Aazjt The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Pedpex D Rxpefx Aazsgt Application Types Cutting

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) Pjdpjx Sz A Rjfx Aazsgt • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 Pgjdszia Idspfx Aazet External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Pgsdpfozka Imjx Aazot

Condition: used, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm Pjdpfxszu A Uqo Aazsgt

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction Pgodpfsvvl Ugex Aazst • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 Psdey Rvfqopfx Aazegt We can organise shipping / delivery for you.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) Psdpfx Aeyhxppoazegt PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier Pedpfoguqucjx Aazjgt 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!