Used Foam for sale (426)

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  - Capacity: - Working: 1,200 L / 12 hL - Total volume: 1,300 L / 13 hL Duodpewkfwpofx Anyjw - Pressure: - Working pressure: 2 bar - Shell: 0.49 bar - Factory hydraulic test: 2 bar - Certified (PED): 3 bar - Material: AISI 304 stainless steel - Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered - Finish: - Interior: 2B with polished welds - Exterior: brushed grain 120 with polished welds - Heads: Klopper type (top and bottom) - Cooling: Cooling jacket on the cylinder - Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar - Connections & fittings: - 2 lifting lugs - Ladder support - CIP tube with top spray ball and 2x butterfly valves NW40 - Drain valve NW40 with cap and chain - Bottom discharge valve NW40 with cap and chain - Sight glass level tube (rigid acrylic, graduated in liters) - Probe port (PT-100 sensor) - Sampling valve - Safety valve (calibrated at 3 bar) - Mounting: Adjustable feet  

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  - Capacity: - 27,000 b/h at 1.0l PET - 25,000 b/h at 1.5l PET Duedpfewiizpsx Anysw - 22,500 b/h at 2.0l PET - Formats: 1.0l, 1.5l, 2.0l PET bottles - Closure: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw capper 720-18-126 (Alcoa) - Running direction: Right-Left (anti-clockwise) - Neckhandling with Pick&Place-System - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 - Machine safety: Full guarding – lifting version - Control Unit: Siemens S7 - Accessories: Krones Checkmat Scope of Delivery - Krones Sensometic VP-I-PET filler - Screw capper by Alcoa (720-18-126) - Krones Checkmat - Pick&Place neckhandling system - Integrated foaming system - Neumo butterfly valves

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 Dusdpfowh U Avjx Anyjw - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Year of construction: 2000, condition: used, Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet Dujdpfettc Tcsx Anysw -Fire extinguisher cabinet with fire alarm, foam extinguisher and wall hydrant with hose reel -Foam extinguisher: Gloria -Hose reel: Gesa pressure hose DN 25 length 30 m -Number: 1x fire extinguisher cabinet available -Dimensions: 1175/250/H920mm -Weight: approx. 100 kg

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Dedeyr Nr Sspfx Anysuw Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: new, power: 210 kW (285.52 HP), fuel type: diesel, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 4,100 mm, fuel: diesel, color: red, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2023, Equipment: air conditioning, = Additional options and accessories = - Leaf suspension = Notes = Air conditioning MP3 radio Reversing camera with a 7-inch display 26,000 lumen front beam Motorola DM4600E Electric winch with a pulling force of 9,979 kg and 28-meter steel cable. Duedpfx Asvz T Hbsnyjw Equipped with Szczesniak fire-fighting superstructure. Crew cab for 6 personnel 3+3+1 compartment layout 5.4 m LED light mast Tanks: Water 3,000 l + foam: 300 l Godiva P2A 2010 dual-range vehicle pump DWP16/24 stainless steel roof monitor Roof monitor: water/foam discharge capacity: 800/2400 l/min, throw range 60 m Manual foam proportioner: 3% - 6% 60 m hose reel with pneumatic winding system Chassis-mounted sprinkler system = Further information = Transmission: Servoshift 6+1, manual gearbox Year of manufacture: 2023 Cab: double Tire size: 11R22.5 Suspension: leaf suspension Front axle: steered

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, Equipment: air conditioning, = Further options and equipment = - Leaf suspension = Remarks = Fuel tank: 220 litres AdBlue tank: 27 litres Air conditioning NMT infotainment system, radio, navigation Rear-view camera integrated into MAN display Reverse parking sensors with warning sound Fitted with Volkan fire fighting system: Crew cab with 5+1 seats Locker configuration: 4+4+1 Telescopic lighting mast Fireco 5m, equipped with two projectors, 15,000 lumens each Tanks: 4,000 litres water + 200 litres foam Pump assembly: Volkan, rear-mounted Low-pressure stage with the following rated parameters: flow 3,000 l/min at 8–10 bar High-pressure stage with the following rated parameters: min. flow 250 l/min at 35–40 bar Water and foam monitor (electrical or manual operation) mounted on the body roof Hose reels 2x, located at the rear on both sides of the body Acoustic and visual warning system Cab control system for operation of the water/foam monitor = Additional Information = Transmission: TipMatic 12.12 OD, automatic Year of manufacture: 2023 Cab: double Tyre size: 315/80R22.5 Suspension: leaf Front axle: steerable Duodpfxovz Ttbj Anysw Gross vehicle weight: 18,000 kg

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 07/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. Dusdpfxey Ev Dis Anyjw THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes).

Year of construction: 2013, condition: used, Herbort 159 CVM Vacuum Homogeniser – 2013 Manufacturer: Herbort Model: 159 CVM Year of construction: 2013 Machine has been recently overhauled Duodpfszh Um Eex Anysw Description High-quality Herbort 159 CVM Vacuum Homogeniser for the production of homogeneous and dispersed food products. This machine is specifically designed for mixing, dispersing and homogenising liquid to highly viscous products under vacuum, resulting in a superior product quality and extended shelf life. The vacuum system removes air and oxygen during processing, preventing foaming and oxidation while preserving flavour, colour and vitamins. Ingredients can be added directly into the vessel or through the side funnel. The product continuously circulates through the homogenising unit until the desired consistency is achieved before being discharged. This machine is equipped with a modern Siemens PLC control system, frequency-controlled drive and a climate-controlled electrical cabinet. Suitable for - Mayonnaise - Dressings - Ketchup - Sauces - Dips - Soups - Emulsions - Remoulade - Other liquid and viscous food products Technical specifications - Container capacity: 320 litres - Batch size: 200 litres - Transfer capacity: 500 L/min (water) - Homogenising unit: 11 kW - Mixing speed: 3,000 rpm - Noise level: 70 dB - Machine weight: approx. 850 kg - Vacuum mixing and homogenising system - Stainless steel construction - Siemens PLC control - Frequency inverter - Climate-controlled electrical cabinet Advantages - Vacuum processing prevents oxidation and foaming - Excellent product consistency - Gentle product handling - Hygienic stainless steel construction - Easy cleaning and maintenance - Suitable for continuous industrial food production Condition: Good used condition. Available immediately from stock at STC Food Solutions. For more information, technical details or an inspection appointment, please contact us. Manufacturer: Herbort Model: 159 CVM Year of construction: 2013 * Container capacity: 320 litres * Transfer capacity: 500 L/min (water) * Homogenising unit: 11 kW * Machine weight: approx. 850 kg

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Dujdpfxolkbpzj Anysw Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: used, mileage: 19,535 km, power: 335 kW (455.47 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #374 Mercedes-Benz Actros 2546 L 6x2 / FFG elephant multi 11.003 MSR Water Recycling Unit FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure flushing and sludge suction vehicle with water recycling * Permissible operating overpressure -1 / 0.5 bar * Approx. 11,000 liters tank volume (air volume) * Approx. 8,200 liters sludge volume max. * Approx. 6,600 liters water volume max. * Emptying with telescopic piston and three piston positions * Automated piston process with closed lid * Control system FFG elephant comfort pro (CAN bus) * FFG elephant connect * Automatic water recycling Chassis Mercedes-Benz Actros 2546 L 6x2 * TipMatic * 455 hp / 335 kW * EURO 6 * Fuel volume approx. 290 l * Chassis color Novagrau * Cab color MB 9147 Arctic white * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m3/h * Water ring pump Dujdpfxswv Dg Hs Anyew * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * Approx. 340 l/min at 205 bar * Low-maintenance belt drive Boom system FFG Multifunction boom XL * Max. outreach approx. 6,200 mm (telescopic) * Approx. 200° hydraulically swiveling * Parallel guidance of high-pressure and suction hose * High-pressure hose reel on the tank dome for 200 m DN 25 * Hose length measuring device DN 25 * 2nd high-pressure hose reel on the boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on the tank dome Special features hydraulic winch on the boom * Tilting scrap box * Vise * Brackets * Hand washing facilities, hot water * 7 work spotlights * 4 rotating beacons and LED flashing lights front and rear * Reversing camera * Hose storage and closed equipment box * Wardrobe, heated * Compressed air connection for foam filling * Various brackets for tools and equipment Technical data GGW 26,000 KG * Unladen weight 18,975 KG * Length 8,990 mm * Height 3,650 mm * Width 2,550 mm Chassis - Special equipment: Axle load - measuring device, axle load front axle 9.0 t, audio system: digital radio DAB / DAB+, right exterior mirror with maneuvering position, battery 220 Ah, cockpit multimedia interactive, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3 leaves, fire extinguisher, windshield tinted with band filter, vehicle without trailer brake, vehicle without trailer coupling, generator 150 A, transmission 12-speed - type: G 330-12, transmission lock independent of the transmission, rear axle bevel gear 300, fender 3-part, fender 3-part with splash guard, cool box / refrigerator, air compressor 2-cylinder, engine brake reinforced, trailing axle 9 t steered, unladen, auxiliary drive independent of the transmission and dependent on the clutch MB 1.2, auxiliary drive MB 131-2c, parameterizable special module, frame overhang 1650 mm, rain sensor, reversing warning acoustic and warning flashing light (warning signal outside), key with remote control additionally (2), fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: armrests on both sides passenger seat, seats in the cab: passenger seat comfort suspension seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, steel rims 11.75x22.5 (on front axle), socket 24V / 25 A in the passenger footwell, socket 24V in the passenger footwell additionally, steep shoulder rims 11.

Condition: new, machine/vehicle number: 1602-2-2, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, overall weight: 3,500 kg, wheelbase: 3,445 mm, fuel: diesel, CO₂ emissions: 196 g/km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg, New Vehicle EU New Car Mileage: 5 km Fuel: Diesel kW/HP: 96/131 Manual Transmission, 6 Gears ccm: 1,997 cm³ Particulate filter, air conditioning, daytime running lights, rear view camera, ESP, ABS, on-board computer, heated mirrors, electric windows (front), central locking with remote control, emission class (commercial vehicle): Euro 6, COC papers. Sales unit made of GFK Superlight in sandwich construction with an alcove, unused, and with a large sales flap covering the entire vehicle width on the right side, 2/3 seating, driver's license class B, running board at the rear, LED lights, rear view camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body, internal dimensions LWH: 3500 x 2250 x 2300 mm Side flap: 3270 x 1480 mm Permissible total weight: 3,500 kg Unladen weight: 2,750 kg Paint on request Interior fittings: Left side: 1 work surface with stainless steel worktop, sliding doors and partition, approx. 3500 x 600 x 850 mm 1 double sink approx. 600 x 600 x 850 mm WDH including fresh and wastewater tank, water heater and pressure system, soap and paper dispenser. 12V battery automatic charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250mm. Duodpfef D Eg Tsx Anyow Right side: 1 refrigerated display counter with a depth of 800 mm with compressor, storage space with extra doors at the bottom, foam-insulated housing, display area in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WDH. Additional equipment: Storage space above the sales flap, foldable bag storage at the sales opening. 2 LED panels on the ceiling, 3 LED spotlights above the sales counter, dimmable, and LED counter lighting. Standard electrical installation 380 Volt/16A switchable to 230 Volt/16A, 2x inlet socket according to CEE standard, RCD circuit breaker, 16 amp fuse with acceptance test, 5 double sockets, hygiene package. Errors and prior sale excepted!

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. The equipment shown in the photos belongs to the vehicle and will be included. Water tank: 1230 liters Dedpfx Aoy S Thfonysuw Foam tank: 130 liters

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Dsdezixq Dspfx Anysuw Drive motor 55 kw

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). Duodpfxewrn Iyo Anysw 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Djdpfxewgc I Ro Anyeuw • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2017, Item: AL-10509-CSF Pump 7.5kW CSF Inox Self-Priming Pump – Type ASH65-4-10/BM.CDPZTH1 Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy Model: ASH 65-4-10/BM.CDPZTH1 Year: 2017 (newer, used) Material: Stainless steel AISI 316L Power: 7.5 kW Speed: 1450 rpm Duedpfx Anezfhcneysw Voltage: 400/690 V – 50 Hz ATEX certification: II 2G c T3 (Zone 1) Connection: 3″ sanitary fittings Condition: Very good, unused – stored in original wooden crate Description: High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments. The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy, and chemical solutions. The low-speed 1450 rpm motor provides smooth operation with reduced shear and foaming – ideal for milk, cream, wine, juice, or CIP applications. The pump housing, impeller, and shaft are made entirely of AISI 316L stainless steel, ensuring long service life and corrosion resistance. Typical Applications: Dairy and food processing lines Beverage, wine, and juice plants CIP cleaning systems Chemical and pharmaceutical installations ATEX classified areas Status: Ready for immediate delivery Location: Denmark

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, overall weight: 1,550 kg, Equipment: CE marking, documentation/manual, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine. Dujdpfxsr D Nmkj Anyjw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), table width: 1,300 mm, table length: 2,500 mm, overall weight: 790 kg, number of axes: 3, Equipment: CE marking, documentation/manual, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Djdpfor D Ntfex Anyeuw Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. This model can create half of the furnishings for the kitchen and living area. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. Wattsan M1 1325 planetary gears allow you to cut hard wood and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 characteristics Dedpfxorywfns Anyouw Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2080 x 3100 x 1890 mm Weight: 690 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3.2 kW (4.35 HP), number of axes: 3, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. It works with metal, wood, plastic, foam rubber, aluminum, and plexiglass. Wattsan A1 1325 has a T-slot table that allows you to secure items using bolts, clamps, or a mechanical holdback. This router is equipped with two-phase stepper motors, allowing for better movement along the X, Y, and Z axes. With a Wattsan milling machine, you may make doors, tables, seats, machine components, and other items. You can give our managers a call for additional details! Dsdpfx Anjryv Dbsyeuw Wattsan A1 1325 characteristics Working area: 1300x2500 mm Spindle: 3 kW Machine size: 1960 x 3100 x 1662 mm Weight: 630 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 540 kg, positioning accuracy: 0.05 mm, table length: 1,300 mm, table width: 1,300 mm, number of axes: 3, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. This model can create half of the furnishings for the kitchen and living area. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. Wattsan A1 1313 has a T-slot table that allows you to secure items using bolts, clamps, or a mechanical holdback. This router is equipped with two-phase stepper motors, allowing for better movement along the X, Y, and Z axes. With a Wattsan milling machine, you may make doors, tables, seats, machine components, and other items. It works with metal, wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan A1 1313 characteristics: Working area: 1300x1300 mm Spindle: 2.2 kW Machine size: 1960x1900x1662 mm Weight: 470 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Duedpfoih Sd Dex Anyew Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 3.2 kW (4.35 HP), overall weight: 650 kg, positioning accuracy: 0.05 mm, table length: 1,300 mm, table width: 1,300 mm, number of axes: 3, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. This model can create half of the furnishings for the kitchen and living area. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. Wattsan M1 1313 planetary gears allow you to cut hard wood and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may make doors, tables, LED signs, machine components, and other items. It works with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1313 characteristics: Working area: 1300x1300 mm Spindle: 3 kW Machine size: 2080 x 1900 x 1890 mm Weight: 520 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Duodpfsiicfbex Anyjw YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2020, HP R2000 Very good status, in production. Year: 2020 Mileage: 45.000m² only Options: edge holders View video for extensive presentation For further technical information please refer to attached brochure The HP Latex R2000 is a high-productivity hybrid large-format printer designed for both rigid and flexible media. It uses HP Latex water-based inks, including white ink, to produce durable, high-quality prints for signage, displays, packaging prototypes, vehicle graphics, and interior décor applications. With the ability to print directly onto rigid boards as well as roll-fed materials, the R2000 combines versatility, vibrant color output, and environmental benefits in a single production system. Specification Value Print technology HP Latex water-based inks Maximum print width 2.49 m (98 in) Printer type Hybrid: rigid flatbed + roll-to-roll Maximum print resolution 1200 × 1200 dpi Ink colors 9 channels: C, M, Y, K, Light C, Light M, Optimizer, Overcoat, White Printheads 8 printheads Ink capacity 5 L (colors/optimizer/overcoat), 3 L (white) Maximum rigid media thickness 50.8 mm (2 in) Maximum roll weight 100 kg Maximum roll diameter 250 mm Connectivity Gigabit Ethernet Printer dimensions 5.10 × 2.04 × 1.75 m Dimensions with tables 5.10 × 3.64 × 1.75 m Weight 1,600 kg Operating temperature 15–30 °C Operating humidity 20–70% RH Power consumption 8–11 kW during printing Warranty (original) 180-day limited hardware warranty Print Speeds Mode Speed Outdoor (3-pass, 70%) Up to 86 m²/hr Indoor Production (6-pass, 110%) Up to 43 m²/hr Indoor High Quality (12-pass, 120%) Up to 22 m²/hr White Spot Up to 36 m²/hr White Overflood/Underflood Up to 16 m²/hr Day & Night (3 layers) Up to 5.2 m²/hr Supported Materials Rigid substrates Foam board PVC foam Corrugated plastic Dodpfx Anjzdtuajysuw Acrylic Polycarbonate Polystyrene Corrugated cardboard Honeycomb board Aluminum composite panels Wood Glass Ceramic Flexible substrates Vinyl banners Self-adhesive vinyl Coated papers Polypropylene Polyester Canvas Textile (non-porous) Leather Typical Applications Retail signage Backlit displays Vehicle graphics and wraps Wall coverings Window decoration Packaging prototypes Corrugated displays Textile graphics and soft signage

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Dodpfsqa Dq Dsx Anyeuw Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.